.help revisions Jan97 images .nf imfit/src/imsurfit.x The 'fbuf' and 'colsfit' pointers were declared with the wrong type. (5/4/13, MJF) tv/imedit/epstatistics.x The 'x', 'y', and 'z' pointers were declared as TY_INT instead of TY_REAL (5/4/13, MJF) immatch/src/linmatch/rgltools.x There were TY_INT arrays being called with Memr[] (4/20/13) imcoords/src/t_ccmap.x There were missing arguments that will cause "refpoint=user" to crash with a floating point overflow. (9/21/12, Valdes) imatch/src/imcombine/src/icombine.x Removed TRAP debug message. (5/11/12, Valdes) imatch/src/imcombine/src/icsetout.x Changed 1 Gpixel limit (see 6/11/09) to 100 Gpixel. (5/11/12, Valdes) immatch/src/geometry/t_geomap.gx lib/geofit.gx The real path of t_geomap.gx code treated geomap.h floating parameters as being of type PIXEL rather than double. Also in the real path of geofit.gx there was an attempt to coerce an INDEFD to a real value. (5/10/12, Valdes) imcoords/src/t_ccmap.x imcoords/ccmap.par lib/geofit.x lib/geogmap.gx Updates to the previous changes. A new option "tweak" was added to the values for the "refpoint" parameter to allow controlling whether to tweak the input tangent point. (3/16/12, Valdes) imcoords/src/t_ccmap.x imcoords/ccmap.par imcoords/doc/ccmap.hlp Changes to allow constraining WCS solutions to specified tangent point parameters (reference pixel and reference coordinate). 1. New parameters xref and yref can be set to a value or header keyword in order to constrain the solution to the specified reference pixel. This adds parameters so potentially requires users to update scripts. (2/7/12, Valdes) lib/geoset.x + lib/mkpkg lib/geofit.x lib/geomap.h lib/geofit.gx These changes are to allow calling gsurfit with the fit constrained to a specific reference point and value. This is used by ccmap to constrain WCS solutions to specified CRVAL/CRPIX values. 1. Added geoset procedures to set some new parameters. 2. The new parameters are passed on to gsurfit. These changes should be transparent to any existing usage. These chanages are coupled to changes in gsurfit. (2/7/12, Valdes) ===== v2.16 ===== immatch/imcombine.par The enumerated values for the combine value had to be expanded to agree with the help page and the task functionality. (Valdes, 12-16-11) imgeom/doc/imlintran.hlp Corrected the description of the image scaling to remove extra terms (i.e. "xt = xt/xmag + yt/ymag" becomes "xt = xt/xmag") (12/16/11) imcoords/src/t_ccmap.x imcoords/doc/ccmap.hlp Modifications to allow using multiple exposures to produce one solution. This was done in such a way that no new parameters are needed. (8/9/11, Valdes) immatch/src/imcombine/src/icgdata.gx The image id data was not properly initialized when some data was excluded causing a segmentation fault with the grow option is used with masks or non-overlapping data. (4/1/11, Valdes) immatch/src/imcombine/mkpkg The "standalone" target was not correct for the imc library changes. (4/1/11, Valdes) immatch/src/imcombine/src/icomb.gx A feature to reduced memory requirments by removing the user area of the image header structure is a problem when masks and wcs offsets are used due to the need for the mask matching code to access the wcs. For now this feature is turned off. (3/4/11, Valdes) ======== V2.15.1a ======== immatch/src/imcombine/src/icaclip.gx immatch/src/imcombine/src/iccclip.gx immatch/src/imcombine/src/icmm.gx immatch/src/imcombine/src/icpclip.gx immatch/src/imcombine/src/icsclip.gx The change that allowed the array containing the number of good pixels to be negative was not taken into account in these routines. While I did not fully check the logic the simple step of applying a floor of zero to the array values should be safe since these routines were originally written to expect values from 0 on up. (1/10/11, Valdes) immatch/src/imcombine/src/generic/mkpkg immatch/src/imcombine/src/mkpkg immatch/src/imcombine/mkpkg mkpkg Converted the generic combining code into a core library so that other versions of combine (such as in ccdred, mscred, nfextern) will share the same code rather than have copies. (1/4/11, Valdes) immatch/src/imcombine/src/ichdr.x Accidentally left a debugging statement that printed the letter C. This is now removed. (12/10/10, Valdes) immatch/src/imcombine/src/ichdr.x The step that stripped any directory from the image name for the $I value of the imcmb parameter failed for extensions. (11/17/10, Valdes) immatch/doc/imcombine.hlp immatch/src/imcombine/imcombine.par immatch/src/imcombine/src/generic/mkpkg immatch/src/imcombine/src/icaverage.gx immatch/src/imcombine/src/iclog.x immatch/src/imcombine/src/icnmodel.gx + immatch/src/imcombine/src/icomb.gx immatch/src/imcombine/src/icombine.h immatch/src/imcombine/src/icquad.gx + immatch/src/imcombine/src/mkpkg Added two combine options -- "quadrature" and "nmodel". This allows sigma images to be input and output. (4/21/10, Valdes) immatch/src/imcombine/t_imcombine.x immatch/imcombine.par immatch/src/imcombine/imcombine.par immatch/src/imcombine/src/generic/icmedian.x immatch/src/imcombine/src/icmedian.gx immatch/src/imcombine/src/icombine.com immatch/src/imcombine/src/icombine.h immatch/doc/imcombine.hlp Added a specialized "lmedian" option to use the lower value when there are only two values contributing to the output. (4/12/10, Valdes) images/imcoords/src/t_hpctran.x images/imcoords/src/healpix.x images/imcoords/src/mkpkg images/imcoords/doc/hpctran.hlp images/imcoords/hpctran.par images/imcoords/imcoords.cl images/imcoords/imcoords.hd images/imcoords/imcoords.men images/x_images.x A new task to convert between HEALPix row and spherical coordinates. Data access to a HEALPix FITS binary table can be done with the TABLES package but being able to compute the row from a coordinate was needed. (7/28/09, Valdes) images/immatch/src/imcombine/src/icombine.x The earlier change 10/22/08 that closes the masks between each line had an error that instead of doing this only after trying without closing the masks it was doing it every time. (7/21/09, Valdes) images/immatch/src/imcombine/src/icomb.gx The data buffers were not initialized after a salloc which could cause a arithmetic error when doing offset images. This came up with mergeamps. (7/9/09, Valdes) images/immatch/src/imcombine/src/icsetout.x To protect against wild errors in the offsets (usually from a problem with the WCS) for making a stack a warning error occurs if the output size exceeds 1Gpixels when offsets used. (6/11/09, Valdes) images/imcoords/src/t_ccsetwcs.x The behavior described in the help when there is more than one image and only one solution specified does not agree with the code. I changed the code to agree with the help. (5/21/09, Valdes) images/imutil/src/nhedit.x images/imutil/src/getcmd.x images/imutil/nhedit.par images/imutil/doc/nhedit.hlp A "rename" parameter switch was added for renaming a keyword. The value field is the new keyword name. (2/25/09, Valdes) images/immatch/src/imcombine/src/icombine.x If the input images have "[0]" and the output is to list only then the extension is stripped. This is to allow a grouping task to output the parent images of mefs. (1/20/09, Valdes) images/immatch/src/imcombine/src/icgdata.gx When keepids=yes (such as with weighting) and using the "novalue" masktype the id array was not set causing errors in icaverage. (1/5/09, Valdes) images/imutil/src/hedit.x Fixed a problem in the he_gval() procedure in which the use of '$' in a field name was causing the imgstr to always fail. Added a check so the field name is queried witout the leading '$' (1/2/09, MJF) pkg/xtools/imfilter/src/runmed.x Modified because of an argument change in an xtools/rmmed.x routine. There was not functional change. (10/29/08, Valdes) images/immatch/src/imcombine/src/icemask.x images/immatch/src/imcombine/src/icomb.gx images/immatch/src/imcombine/src/icombine.x images/immatch/src/imcombine/src/icsetout.x images/immatch/src/imcombine/src/xtimmap.gx images/immatch/src/imcombine/src/imcombine.h images/immatch/src/imcombine/src/generic/xtimmap.com More changes to optimize large number of image and memory behavior. (10/23/08, Valdes) images/immatch/src/imcombine/src/xtimmap.gx Debugging statements were added controled by an define at the top. This allows watching when images are mapped and unmapped. (10/22/08, Valdes) images/immatch/src/imcombine/src/icmask.x images/immatch/src/imcombine/src/icmask.h images/immatch/src/imcombine/src/icombine.x If memory runs out not only is the image buffer size reduced but the pixel masks (if used) are closed after each access. This may be rather inefficient but was the simplest way to handle the fact that masks are stored in memory and can't easily be buffered in line blocks. (10/22/08, Valdes) images/immatch/src/imcombine/src/icaclip.gx When too many pixels are rejected the operation of adding back some pixels would clobber the sigma value; i.e. reuse of a variable still in use. (10/13/08, Valdes) images/immatch/src/imcombine/src/icaclip.gx images/immatch/src/imcombine/src/iccclip.gx images/immatch/src/imcombine/src/icsclip.gx When clipping about the median from below the rejection could terminate early, because the wrong variable was used, resulting in an incorrect value. I believe this will only be a problem when the sigma factor is very small. (10/07/08, Valdes) ======= V2.14.1 ======= images/x_images.x images/imutil/imutil.cl images/imutil/imutil.hd images/imutil/imutil.men images/imutil/nhedit.par + images/imutil/doc/nhedit.hlp + images/imutil/src/nhedit.x + images/imutil/src/getcmd.x + images/imutil/src/mkpkg Installed the NHEDIT task (HEDIT with comments) (8/19/08, MJF) images/immatch/doc/geomap.hlp images/immatch/doc/geotran.hlp Fixed some typos in the doc. (8/13/08, MJF) images$imutil/src/imexpr.gx Quoted strings in the expression database were not being handle correction. Specifically, the quotes were stripped and single quotes were being parsed as character constants. (8/12/08, Valdes) images$immatch/src/imcombine/src/ichdr.x The PROCID keywords have not proven to be very meaningful. In the interests of backwards compatibility, if imcmb=$I these keywords are still written but otherwise they are not. (7/23/08, Valdes) images$immatch/src/imcombine/src/ichdr.x images$immatch/src/imcombine/imcombine.par images$immatch/imcombine.par images$immatch/doc/imcombine.hlp A new parameter "imcmb" was added to control the value written to the IMCMBnnn keywords in the output image. The value is a keyword in the input images to be copied to the output IMCMBnnn keywords. The default parameter value, "$I", is the basename input image name as before. (7/22/08, Valdes) images$imutil/src/t_imstat.x The clipping calculation was resetting the user supplied pixel limits. Instead, any clipping limits need to remain bounded by the user limits. (7/15/08, Valdes) images$imfilter/runmed.par images$imfilter/doc/runmed images$imfilter/src/t_runmed.x images$imfilter/src/runmed.x images$imfilter/src/rmmed.x - 1. rmmed.x was moved to xtools. 2. A new parameter, nclip, was added to allow clipping of high values from the running median. (2/29/08, Valdes) images$immatch/src/imcombine/t_imcombine.x images$tv/imexamine/ievimexam.x Fixed some procedure calls closed with a ']' instead of ')' (02/17/08, MJF) images$immatch/src/imcombine/src/icmask.x images$immatch/src/imcombine/src/icgdata.gx images$immatch/src/imcombine/src/icaverage.gx images$immatch/src/imcombine/src/iclog.x images$immatch/src/imcombine/src/icmedian.gx images$immatch/src/imcombine/src/icomb.gx images$immatch/src/imcombine/src/icombine.h 1. Added a new "masktype" option called "novalue". This uses 0 for good pixels, "maskvalue" for pixels with no data, and any other value for bad pixels. When there is no overlapping good data the blank value is used if all the pixels are no data and otherwise the image pixel values are combined as if good. The output mask will have 0 for good, 1 for no data, and 2 for data based on bad data. 2. The "masktype" option can now be "! " to specify both a keyword for the mask and any mask type method. (2/11/08, Valdes) images$imcoords/src/t_ccfind.x When using a ZPN projection, the transform code in mwcs tries to reference the parent image to get the PV matrix keywords. This task called sk_decwcs() to open the WCS, but for an image it then unmapped the image. When the task later uses the 'mw' pointer to transform coords the ZPN reference to the parent image is invalid and results in a segfault. Changed the code to call sk_decim() directly and operate on the currently open image instead. (1/23/08, MJF) images$imcoords/src/t_ccmap.x images$immatch/src/psfmatch/rgpsfm.x images$imutil/src/t_imtile.x images$tv/imexamine/t_imexam.x Fixed various type declaration problems (1/21/08, MJF) images$immatch/src/imcombine/icmask.x Changes to support the pmmap features of mask matching. (1/21/08, Valdes) images$immatch/src/imcombine/src/ichdr.x When recording the images combined only the basename is now used. (1/21/08, Valdes) images$immatch/src/imcombine/src/icombine.x images$immatch/src/imcombine/t_imcombine.x Added a listonly argument. This is not currently used by IMCOMBINE but is used in other packages sharing this library. (1/21/08, Valdes) images/lib/rgtransform.x image/immatch/src/listmatch/t_xyxymatch.x Changed the name of the rg_intersect() function to rg_intersection() to avoid a possible conflict with an xtools procedure of the same name. (1/16/08, MJF) images$tv/imed.par Added entries for missing minvalue/maxvalue params (1/14/08, MJF) images$immatch/src/geometry/t_geomap.gx Changed the output precision of the rotation angles from 3 to 5 decimal places. (1/14/08, MJF) images$imfilter/src/runmed.x Modified to use yt_mappm for the input mask. The default is still to work in logical coordinates but now the user can set "pmmatch=world" to match masks in world coordinates to efficiently implement the dimsum approach to second pass sky subtraction. (1/9/08, Valdes) ===== V2.14 ===== images$imfilter/src/rmmed.x A data structure was allocated with a wrong length (too short) resulting in the possiblity of a segmentation violation. (1/18/07, Valdes) images$immmatch/src/imcombine/src/icgdata.gx The optimization for large numbers of offset images which don't overlap (such as a strip of exposures) caused problems with offsets on 3D images. The optimization was made to apply only with 1D or 2D output images. (10/20/06, Valdes) images$immmatch/src/imcombine/src/icomb.gx The addition of the sum option failed to add a case for selecting how to set the keepids flag. Add SUM to the switch on line 229. (2/28/06, Fitzpatrick, Valdes) images$imcoords/src/mkcwcs.cl I can't remember if there was a reason for the first two hedit calls. But if a new image is being created these calls cause a warning error. The safest way to address this without remember if there is a reason for the statements is to put them inside a block that is executed only if the image exists. (1/27/06, Valdes) images$imcoords/src/mkcwcs.cl + images$imcoords/src/mkcwwcs.cl + images$imcoords/doc/mkcwcs.hlp + images$imcoords/doc/mkcwwcs.hlp + images$imcoords/imcoords.cl images$imcoords/imcoords.men images$imcoords/imcoords.hd Two new tasks were added to create or modify simple and standard celestial and celestial/wavelength WCS. The parameters are designed to make it simpler for a user to specify WCS information in a natural way without understanding the details of the WCS structure. The tasks may be used to make data-less WCS for templates or to add or update a WCS in an image. These scripts depend on the changes to WCSCOPY and WCSEDIT which are the underlying interfaces to the WCS. (6/24/05, Valdes) images$imcoords/src/t_wcsedit.x images$imcoords/wcsedit.par images$imcoords/doc/wcsedit.hlp Modified to allow a new data-less WCS header to be created of dimensionality given by the new parameter "wcsdim". (6/23/05, Valdes) images$immatch/src/wcsmatch/t_wcscopy.x images$immatch/doc/wcscopy.hlp Modified to allow creation of a new data-less WCS header. Also checking on image sizes and dimensionality was commented out. (6/23/05, Valdes) ======= V2.12.3 ======= images$imfilter/src/t_runmed.x images$imfilter/src/runmed.x images$imfilter/src/rm_med.x images$imfilter/src/mkpkg images$imfilter/runmed.par images$imfilter/doc/runmed.hlp images$imfilter/imfilter.cl images$imfilter/imfilter.hd images$imfilter/imfilter.men images$x_images.x Installed new running median task. (5/6/05, Valdes) images$imcoords/src/t_ccsetwcs.x The option to specify a list of images with a single plate solution record, as described in the help, was not working. This was fixed. (10/8/04, Valdes) images$immatch/src/wcsmatch/t_wcscopy.x Removed a check that would not allow dataless WCS to be copied. (8/25/04, Cooke & Valdes) images$imutil/src/imgets.x Modified so that strings with double quotes can be accessed. (7/27/04, Valdes) images$immatch/src/imcombine/src/icmask.x images$immatch/src/imcombine/src/iclog.x images$immatch/src/imcombine/src/imcombine.h images$immatch/src/imcombine/imcombine.par images$immatch/imcombine.par As a special unadvertised feature the "maskvalue" parameter may be specified with a leading '<' or '>'. Ultimately a full expression should be added and documented. (7/26/04, Valdes) images$immatch/src/imcombine/src/icmask.x images$immatch/src/imcombine/src/Revisions + Added a feature to allow masks specified without a path to be found either in the current directory or the directory with the image. This is useful when images to be combined are distributed across multiple directories. (7/16/04, Valdes) ======== V2.12.2a ======== images$immatach/src/imcombine/src/icgdata.gx Offset one-dimensional images do not combine correctly because the imgnl routines reset the index counter for the first element in this case. This index counter was being used assuming only the second dimension would increment; i.e. images were at least 2D. (4/8/04, Valdes) images$imutil/src/hedit.x The task could segfault when initializing/adding a new keyword with a null value. The evexpr operator was being initialized as a scalar and the string pointer wasn't allocated, added a check so string pointer is always allocated to at least one char. (3/23/04, MJF) images$imcoords/src/t_wcsctran.x If the image dimensionality is zero then use the WCS dimensionality. (3/15/04, Valdes) images$imcoords/src/t_wcsctran.x An error in mw_openim was trapped but the garbage in the return value caused a segmentation error during error recovery. A fix was made to this and also to report, as a comment, the MWCS error. (3/12/04, Valdes) ======= V2.12.2 ======= images$immatch/src/imcombine/src/xtimmap.gx The change for the short image name from 8/20/03 was lost. This change restores it. (2/3/04, Valdes) images$immatch/src/imcombine/src/xtimmap.gx Copying the IMIO structure to an internal structure required two amovi calls in order to maintain alignment. (2/12/04, Zarate/Valdes) images$immatch/src/geometry/t_geoxytran.x images$immatch/src/geometry/trinvert.x + images$immatch/src/geometry/mkpkg images$immatch/geoxytran.par images$immatch/doc/geoxytran.hlp A new parameter "direction" was added to GEOXYTRAN to allow evaluating the transformation in either the forward direction (the previous behavior and default with the new parameter) or the backward direction. The help page was updated to describe this new feature and address confusion over the relationship between geomap, geotran, and geoxytran. (2/7/03, Valdes) images$immatch/imalign.cl Restructured to avoid goto statements, no functional changes (12/29/03, MJF) images$lib/geomap.gx Small change to improve stability. Instead of checking the value of the difference of two large numbers for zero, the equality of the two numbers is checked. (10/29/03, Valdes) images$immatch/src/imcombine/src/xtimmap.gx Increase the stored filename length. (8/20/03, Valdes) images$immatch/src/imcombine/src/icsetout.x When using offsets based on physical coordinates and there is a flip the routine was incorrectly using imunmap instead of xt_imunmap. (7/30/03, Valdes) images$immatch/src/imcombine/src/icstat.gx Fixed an incorrect declaration for asum$t() in the generic routine. This is the correct fix for: images$immatch/src/imcombine/src/generic/icstat.x Fixed an incorrect declaration for asumd() (7/8/03, MJF) (7/30/03, Valdes) images$imgeom/src/t_imshift.x Fixed and incorrect declaration for clgetd() (7/8/03, MJF) images$tv/imexamine/stfprofile.x The selection of a point to get a first estimation of the FWHM in stf_fit did not check for the case of a zero value. This could cause a floating divide by zero. (5/5/03, Valdes) images$tv/imexamine/stfprofile.x The subpixel evaluation in stf_profile involves fitting an image interpolator to a subraster. To avoid attempting to evaluate a point outside the center of the edge pixels, which is a requirement of the image interpolators, the interpolator is fit to the full data raster and the evaluations exclude the boundary pixels. (5/5/03, Valdes) images$tv/imexamine/stfmeasure.x images$tv/imexamine/stfprofile.x + images$tv/imexamine/mkpkg.x Separated the routines in stfmeasure.x to correspond to those used in OBSUTIL. (5/6/03, Valdes) images$immatch/src/imcombine/src/icombine.x Due to the way IMIO works it converts an out of memory error to cannot open pixel file if a memory alloaction error occurs when allocating file descriptor memory. So if this error occurs and the number of images is small the error will be interpreted as a memory allocation error. (4/9/03, Valdes) images$tv/display/dspmmap.x Added errchk's for im_pmmapo to avoid the potential for a segmentation violation due to an uncaught error. (9/16/02, Valdes) images$imgeom/src/t_imshift.x An incorrect shift of one pixel would appear when the specified shift was near zero and less than the precision of a real; i.e. yshift=1e-9. The code was changed to use double precision as appropriate. (9/12/02, Valdes) images$tv/imexamine/iemw.x Added a heuristic check for the appropriate hHmM formats. (9/12/02, Valdes) images$tv/display/dspmmap.x A common case of matching a mask to an image is where the pixel sizes are the same but there are offsets and/or different sizes. An optimized mask matching based on using range lists and not calling mwcs was added. (9/12/02, Valdes) images$tv/display/dspmmap.x The matched mask was incorrectly returning the input mask when the scale and offset matched but not the size. (9/10/02, Valdes) images$imutil/src/imrep.gx In imrepr$t there was a declaration error for ilower. (see buglog #507) (9/4/02, Valdes/Warner) images$immatch/src/listmatch/t_imctroid.x Added a F_FLUSHNL for the standard output to avoid having the warnings printed with eprintf from occuring in the middle of the output lines. This caused a problem in imalign when scanning the lines. (8/19/02, Valdes) ======= V2.12.1 ======= images$immatch/src/imcombine/src/iclog.x The pixel masks listed in the log output was wrong. This only applies to the log, the correct mask is used during processing. (6/26/02, Valdes) pkg/images/src/xregister/t_xregister.x pkg/images/src/xregister/rgxicorr.x If the xregister task parameter interactive = yes and the output images are defined then the computed shifts are not applied. This occurs because the reinitialization routine triggered by the 'n' keystroke command is in the wrong place. The work around is to run xregister twice, once interactively to compute the shifts, and again non-interactively to apply them. (6/20/02, Davis) images$immatch/src/imcombine/src/icsetout.x Needed to disable axis mapping to handle cases where the input images are dimensionally reduced. (6/14/02, Valdes) images$immatch/src/imcombine/src/xtimmap.gx The size of image header data structures was computed incorrectly resulting in the potential for segmenation violations. (6/14/02, Valdes) ===== V2.12 ===== images$imutil/src/t_imstat.x If nclip > 0 and the initial mean and standard deviation are INDEF (a very unlikely occurence unless there is a mask) the k-sigma limit computation in the imstatistics task could overflow. This does not affect released code. (5/01/02, Davis) images$immatch/src/imcombine/src/icmask.x The fix of 4/8/02 had been inadvertently undone. (4/25/02, Valdes) images$imutil/src/imadiv.gx images$imutil/src/generic.imadiv.x Fixed an error in the code which evaluates an expression of the form "inimage / 0" which was causing a bus error on the macosx but not on solaris. This error has apparently been there for ever. (4/24/02, Davis) images$immatch/src/imcombine/t_imcombine.x images$immatch/src/imcombine/src/icombine.x images$immatch/src/imcombine/src/icsetout.x images$immatch/src/imcombine/src/icmask.x images$immatch/src/imcombine/src/iclog.x The projection option was no longer working. There was a typo in t_imcombine.x, the dimensionality of the image was not set properly in icombine.x and icsetout.x, and the masks for projected images was not correct. (4/22/02, Valdes) images$immatch/src/imcombine/src/icsetout.x When computing offsets the registration point was the reference pixel returned by mw_gwterm for the first image. The code then went on to assume this was a logical pixel when comparing with the other images, which is not true when there is a physical coordinate system. The algorithm was fixed by converting the reference point to logical coordinates. (4/18/02, Valdes) images$imcoords/src/t_ccget.x Ccget was not transforming the units and applying the user supplied formatting parameters if the input or output coordinate system, e.g. ICRS, was the same as the catalog coordinate system. This does not affect released code. (04/16/02, Davis) images$immatch/src/imcombine/src/icmask.x There was a bug in the recent change to open and close masks as needed where a possibly null filename pointer was being checked for being a null string. (4/8/02, Valdes) images$imcoords/src/t_wcsctran.x Added a check for INDEF valued input coordinates. (4/04/02, Davis) images$tv/imexamine/iegimage.x Image sections in the image name retrieved from the display server are now handled more intelligently. In particular, 2D sections of higher dimensional images will now examine the correct 2D section rather than just the lowest 2D plane. (3/20/02, Valdes) images$tv/display/t_display.x If an image section of a higher dimensional image is displayed the image section is included in the image name sent to the display server. Previously the section was stripped and so it was not possible to know the 2D section displayed. For now we keep backwards compatibility by stripping any section from 2D parent images. (3/20/02, Valdes) images$immatch/src/imcombine/src/icombine.x Added error checks for imunmap of the output files. In the final staage of closing the output if an error occurs, principally in writing mask, this will at least allow the primary combined output image to be written. This is useful when an extremely large combining operation is performed. (3/6/02, Valdes) images$immatch/src/imcombine/src/iclog.x images$immatch/src/imcombine/src/icmask.x images$immatch/src/imcombine/src/icstat.gx Rather than open all the masks at the beginning the masks are now opened and closed as needed. For situations with offsets this can reduce the amount of memory required for the masks. (3/6/02, Valdes) images$/imutil/src/hselect.x images$/imutil/src/hedit.x Added missing xev_freeop calls to the hedit and hselect tasks and a missing mfree call to the hselect task. (3/5/02, Davis) images$tv/imexamine/iegimage.x When imexmaine fails to map the image name returned by the display server it uses the frame buffer. Previously there was no warning message about failing to map the image. Now there is a warning. This is only given once until the image name is changed either by going to a new frame buffer or doing a new display. (3/4/02, Valdes) images$tv/imexamine/iegimage.x images$tv/imexamine/t_imexam.x When the frame buffer is used as the image source (when the image name in the display frame cannot be mapped) the final imunmap woutd attempt to unmap the same descriptor twice. (3/1/02, Valdes) images$imcoords/src/t_wcsctran.x Fixed a bug the logical to tv coordinate mapping which could occur if the section subsmapling parameter was > 1, the input image was a section of a higher dimensioned image, and the first dimension was not one of those extracted. (3/1/02, Davis) images$tv/imexamine/iegimage.x The 'p' was not properly updated for the multiple WCS changes. (2/26/02, Valdes) images$immatch/src/imcombine/src/xtimmap.gx The header keywords were not being fully copied. (2/20/02, Valdes) images$immatch/src/imcombine/src/icstat.gx images$immatch/src/imcombine/src/xtimmap.gx asum$t declared incorrectly as type PIXEL rather than real. xt_cpix incorrectly defined as pointer function instead of a subroutine. (2/20/02, Valdes) images$imutil/src/t_minmax.x Fixed a floating overflow error in minmax which occurred if the dimensionality of the input image was 0 and the update parameter was set to yes. In this case the min and max values were set to INDEF (min and max computation is done internally in double precision) could not fit into the real valued min and max slots in imhdr.h hence the conversion error. (2/19/02, Davis) images$tv/imexamine/iegimage.x The changes to support multiple WCS per frame involved keeping track of the full WCS frame id (i.e. 101) rather than just the frame number. There was a minor error in this bookkeeping when incrementing the the next display frame to be used. (2/19/02, Valdes) images$lib/imcopy.x Added a missing sfree statement to the img_imcopy routine. (2/18/02, Davis) images$immatch/src/imcombine/src/icaverage.x images$immatch/src/imcombine/src/icsigma.x images$immatch/src/imcombine/src/icomb.gx images$immatch/src/imcombine/src/icscale.x images$immatch/src/imcombine/src/icemask.x images$immatch/doc/imcombine.hlp If weights of zero are given for an image then that image will not contribute to the output weighted average unless all of the non-excluded images have zero weight. In that case the unweighted average is output. The exposure mask is the sum of the exposure times of the images with non-zero weights. These changes allow combining only data which is considered good (photometric or good seeing) as specified by the weights but still including non-good data in the final image when there is no good data. The combinined zero weight data will have an exposure time mask value of zero. (2/8/02, Valdes) images$immatch/src/imcombine/src/icmask.x images$immatch/src/imcombine/src/icmask.h images$immatch/src/imcombine/src/iclog.h images$immatch/src/imcombine/imcombine.par images$immatch/imcombine.par images$immatch/doc/imcombine.hlp The masktype parameter may now specify ! to select the keyword to use for a mask. When this option is selected the mask value interpretation is "goodval". (2/5/02, Valdes) images$immatch/src/imcombine/src/icmask.x If pl_loadf fails then pl_loadim is tried. This adds support for masks in FITS extensions. (2/5/02, Valdes) images$tv/display/dspmmap.x Added the feature that the bad pixel mask or overlay mask may be specified by a keyword value with the syntax !. This is important for multiextension files where various masks are set as keywords. The new task OBJMASKS also writes the object mask name that is created for an image in the header. Use of !objmask then allows the object mask to be used for the bad pixel mask (to set the scaling using only sky pixels) and for overlay. (2/5/02, Valdes) images$tv/display/sigm2.x The routine to compute the maximum value as the interpolated quantity was incorrect because the size of the input and output arrays were treated as the same when they are not. This is used for overlay display which produced the symptom of horizontal lines. (2/5/02, Valdes) images$immatch/src/imcombine/src/icombine.x images$immatch/src/imcombine/src/icomb.gx images$immatch/src/imcombine/src/xtimmap.gx images$immatch/src/imcombine/src/icombine.h The buffer size management calculation based on the number of input images was no longer working because unless IM_BUFFRAC is explicitly set to 0, the requested buffer size is just a lower limit. The buffer size calculation was modified and calls to set IM_BUFFRAC to zero were added. (1/30/02, Valdes) images$immatch/src/imcombine/src/xtimmap.gx images$immatch/src/imcombine/src/icomb.gx images$immatch/src/imcombine/src/icgdata.gx The code to close unused images when they are not needed had an error when there were y offsets. Rather than closing each image when it not longer contributed to an output line due to an offset, it was instead closing all images on every line and then mapping them again. (1/29/02, Valdes) images$imutil/src/t_minmax.x Removed extra arguments from the calls to clpstr. (01/07/02, Davis) images$imutil/src/t_imstat.x Added a call setting IM_BUFFRAC to 0 to the memory caching code in the imstatistics task in order to force the imio buffer to be the size of the input image. (12/10/01, Davis) images$imcoords/src/t_wcsctran.x images$imcoords/src/rgstr.gx images$imcoords/src/rgstr.x Wcsctran may produce a string_file error if the input image is dimensionally reduced. The problem was caused by an uninitialized array. The code works ig by chance the array is initialized to 0. (12/8/01, Davis) images$immatch/src/imcombine/src/icscale.x Fixed bug with normalization. (12/4/01, Valdes) images$imutil/src/hedit.par images$imutil/doc/hedit.hlp images$imutil/src/hedit.x For backwards compatability modified the precedence of the operator switches from addonly / add / delete to add / addonly / delete. Also clarified the switch precedence rules in the help page. (11/13/01, Davis) images$imutil/src/imheader.x Fixed imheader so it prints out an image size of 0 if IM_NDIM(im) is is 0 instead of the contents of the first element of the IM_LEN(im,1) vector which may be non-zero. (11/05/01, Davis) images$immatch/src/xregister/rgxicorr.x images$immatch/src/xregister/rgxcolon.x images$immatch/src/xregister/rgxtools.x Fixed a bug in the xregister multiple region handling code that was preventing xregister from computing x-correlations on regions beyond the first in interactive mode. (10/17/01, Davis) images$imcoords/src/t_skyctran.x images$imcoords/src/t_sffind.x images$imfilter/src/mode.x images$imutil/doc/hedit.hlp images$imutil/doc/imdivide.hlp images$tv/doc/Tv.hlp images$tv/iis/doc/Cv.hlp images$tv/iis/doc/cv.hlp images$tv/iis/ids/doc/Imdis.hlp images$immatch/src/imcombine/t_imcombine.x Fixed various missing/extra argument problems in the images package code that were found with spplint. Also fixed miscellaneous help page formatting problems. (9/19/01 Davis) images$imutil/src/t_imjoin.x Changed the clgetc call to clgstr calls for the pixtype parameter in imjoin. This change is required to avoid an "ERROR: Parameter not a legal character constant (parname)" error introduced by recent changes to the CL. Basically "" is no longer a legal argument for clgetc. (9/17/01 Davis) images$imutil/imstatistics.par images$imutil/doc/imstatistics.hlp images$imutil/src/imstat.h images$imutil/src/t_imstat.x 1. Added an interative rejection capability to the imstatistics task. 2. Added a cacheing option that can speed up the performance of the task if the midpt/mode statistic is computed or if iterative rejection is performed. (8/30/01, Davis) images$immatch/src/imcombine images$immatch/src/imcombine/src + 1. Further modifications and optimizations. 2. Reorganized with a subdirectory of common routines shared with the CCD reduction versions. (8/29/01, Valdes) images$immatch/src/imcombine images$immatch/imcombine.par images$immatch/doc/imcombine.hlp 1. New parameters "headers", "bpmasks", "rejmasks", "nrejmasks", and "expmasks" provide additional types of output. The old parameters "rejmask" and "plfile" were removed. The new "nrejmasks" parameter corresponds to the old "plfile" and the new "rejmasks" parameter corresponds to the old "rejmask". 2. There is a new "combine" type "sum" for summing instead of averaging the final set of offset, scaled, and weighted pixels. 3. There is a new parameter "outlimits" to allow output of a subregion of the full output. This is useful for raster surveys with large numbers of images. 4. Additional keywords may appear in the output headers. 5. The scaling is now done relative to the first image rather than an average over the images. This is done so that flux related keywords such as exposure time and airmass remain representative. 6. The environment parmaeter "imcombine_option" allows using an algorithm that opens and closes images. This is very slow but allows combining large numbers of images which are not the same size. 7. New help page. (8/17/01, Valdes) tv$imexamine/iecimexam.x tv$imexamine/ieeimexam.x tv$imexamine/iegcur.x tv$imexamine/iegimage.x tv$imexamine/iegnfr.x tv$imexamine/iehimexam.x tv$imexamine/ieimname.x tv$imexamine/iejimexam.x tv$imexamine/ielimexam.x tv$imexamine/ieopenlog.x tv$imexamine/ieqrimexam.x tv$imexamine/ierimexam.x tv$imexamine/iesimexam.x tv$imexamine/ietimexam.x tv$imexamine/ievimexam.x tv$imexamine/imexam.h tv$imexamine/t_imexam.x Modifications to use multiple WCS mappings. (8/13/01, Valdes) tv$imexamine/mkpkg tv$imexamine/x_imexam.x + tv$imexamine/imexamine.par + Added a mkpkg target to compile standalone; i.e. mkpkg standalone. (8/13/01, Valdes) immatchx$src/ximcoords/t_ccmap.x Fixed a bug in the ccmap refpoint = "coords" option that could produce a totally inaccurate reference point estimate if the image spanned 0 hours right ascension due to coordinate wrap around. (7/20/01 Davis) images$imgeom/src/t_magnify.x Fixed a bug in the magnify task that can cause a previous block of lines to be repeated instead of a new block computed. This bug was introduced when magnify was upgraded to use the new interpolants code and to use boundary extension in imio. A typo was made in the update which produces the error in the case where the buffer does not update when a new group of lines is computed. This situtation is not normally supposed to occur but may in the situation where the magnification factors are greater than the internal buffer size of 16 output image lines. (6/21/01, Davis) images$immatch/src/imcombine/t_combine.x images$immatch/src/imcombine/icombine.gx images$immatch/src/imcombine/icgdata.gx images$immatch/src/imcombine/icscale.x images$immatch/src/imcombine/xtimmap.x + images$immatch/src/imcombine/mkpkgx When combining more images than there are IRAF FIO descriptors the additional images are mapped and unmapped as needed. There is no limit now on the number of images or that they be capable of being stacked into a single image for combining by projection. The creation of a temporary stack image is no longer done. (6/16/01, Valdes) images$immatch/src/psfmatch/rgpfilter.x images$immatch/src/psfmatch/rgpconvolve.x Fixed a floating point error in the replace algorithm gaussian fitting routines that occurs if the argument to the log function is exactly zero. Fixed a symmetry error in the convolve routine that would produce a corrected psf that was flipped in x and y if the psf matching kernel did not have mirror symmetry. The solution was simply to rotate the convolution kernel 180 degrees before applying it to the input image. The matching kernel itself is correctly oriented and can be used directly with the fconvolve task. (5/15/01 Davis) images$imutil/hedit.par images$imutil/doc/hedit.hlp images$imutil/src/hedit.hlp Added a new addonly parameter to the hedit task. If addonly is set a new field will only be added to the image header if it does not already exist. (4/30/01, Davis) images$tv/display/dspmmap.x Fixed problems with ds_match. The new version is more robust and correct. A bad pixel for the displayed image is the maximum of all pixels in the pixel mask which fall within the display pixel. This version still does not allow any relative rotations but does allow non-integer offsets. (4/24/01, Valdes) images$imgeom/src/t_im3dtran.x images$imgeom/src/t_imtrans.x images$imgeom/src/t_imshift.x images$imgeom/src/t_magnify.x Modified the im3dtran, imtranspose, imshift, and magnify tasks so that the output image which is mapped NEW_COPY is closed before the input image. To the best of my knowledge this has not caused problems to date but it could (3/1/01 Davis) images$immatch/src/imcombine/icsetout.x The physical coordinates of the output WCS are now reset. (3/1/01 Valdes) images$lib/geomap.h images$lib/geogmap.h images$lib/geofit.gx images$lib/geofit.x images$lib/geogmap.gx images$lib/geogmap.x images$lib/geograph.gx images$lib/geograph.x images$lib/geomap.key images$lib/coomap.key images$immatch/geomap.par images$immatch/doc/geomap.hlp images$immatch/src/geometry/t_geomap.gx images$immatch/src/geometry/t_geomap.x images$imcoords$ccmap.par images$imcoords/src/t_ccmap.x images$imcoords/doc/ccmap.hlp Added a new parameter maxiter to the geomap and ccmap tasks. Maxiter defines the maximum number of rejection iterations and has a default value of 0 for no rejection. Changed the default value of the ccmap and geomap parameter reject from INDEF to 3.0. (05/01/01 Davis) pkg/images/imcoords/ Added the tasks CCGET and CCSTD to the image package. (10/12/00 Davis) pkg/images/imcoords/src/t_ccmap.x pkg/images/immatch/src/geometry/t_geomap.gx pkg/images/immatch/src/geometry/t_geomap.x pkg/images/lib/geomfit.gx pkg/images/lib/geomfit.x pkg/images/lib/geogmap.gx pkg/images/lib/geogmap.x pkg/images/lib/geogmap.h pkg/images/lib/geogragh.gx pkg/images/lib/geograph.x pkg/images/lib/geomap.key pkg/images/lib/coomap.key Added a :order command to ccmap and geomap so that the user can change all the orders at once. (10/12/00 Davis) Modified the error checking to fix a segvio problem which occured in ccmap and geomap if the number of points was too few for a good fit and verbose was set to no. (10/12/00 Davis) pkg/images/imcoords/imcctran.par pkg/images/imcoords/src/t_imcctran.x pkg/images/imcoords/doc/imcctran.hlp Added support for doing coordinate transformations accurately on images with non-zenithal projections where rotating the CD matrix does not work accurately. Added a new parameter longpole to the imcctran task. If longpole =yes then coordinate transformations with zenithal projections will be rotated using longpole rather than the CD matrix. (2/7/00 Davis) pkg/images/immatch/ pkg/images/imcoords/ The immatch and imcoords packages were modified to use the new version of the skywcs routines in xtools. (10/12/00, Davis) pkg/images/immatch/imcentroid.par pkg/images/immatch/imalign.par pkg/images/immatch/imalign.cl pkg/images/immatch/doc/imcentroid.hlp pkg/images/immatch/doc/imalign.hlp pkg/images/immatch/src/listmatch/t_imctroid.x pkg/images/immatch/src/listmatch/mkpkg Added a new parameter maxshift to the imcentroid and imalign tasks. Maxshift is the maximum permitted difference between the computed and predicted shifts. Maxshift can be used to reject objects whose centers have wandered too far from the expected center. By default maxshift is undefined. (10/9/00, Davis) pkg/images/imcoords/src/sffind.x pkg/images/imcoords/doc/starfind.hlp Modified the way starfind computes the background estimate used to compute the first and second order moments so that it does not depend on the value and density of the central pixel. (10/9/00, Davis) pkg/images/immatch/src/imcombine/t_imcombine.x Modified the conversion of pclip from a fraction to a number of images because for even number of images the number above/below the median is one too small. (9/26/00, Valdes) pkg/images/immatch/src/imcombine/t_imcombine.x pkg/images/immatch/src/imcombine/icimstack.x Error handling when running out of memory with immap (due to a very large min_lenuserarea) and when trying to stack was fixed up to report reasonable error messages and to not go into an infinite loop trying to manage memory. (9/13/00, Valdes) pkg/images/immatch/src/imcombine/icombine.gx pkg/images/immatch/src/imcombine/icgdata.gx Additional errchk declarations were needed to catch out of memory during image reading which were not caught during the initial pass at reading the images. (9/11/00, Valdes) pkg/images/immatch/src/imcombine/t_imcombine.x When a "cannot open image" error occurs for some other reason than running out of file descriptors the task would go into an infinite loop or given a segmentation error. The checking was improved to avoid this. (8/31/00, Valdes) pkg/images/immatch/src/imcombine/t_imcombine.x When there is an output mask or sigma image and the number of images exceeds the maximum number allowed by the number of logical file descriptors the task failed to delete the files when starting over using the stacked image approach. This would result in an image already exists error. This was fixed by deleting the files upon error recovery. (8/9/00, Valdes) pkg/images/immatch/src/imcombine/mkpkg pkg/images/immatch/src/imcombine/x_imcombine.x + pkg/images/immatch/src/imcombine/imcombine.par + Added a mkpkg entry to allow making the IMCOMBINE task independently of the entire IMAGES package for testing and debugging purposes. (6/21/00, Valdes) pkg/images/immatch/src/imcombine/t_imcombine. pkg/images/immatch/src/imcombine/icimstack.x pkg/images/immatch/src/imcombine/iclog.x pkg/images/immatch/doc/imcombine.hlp When there are a large number of images with bad pixel masks both the input images and the bad pixel masks are stacked for combining. The addition of stacking the masks allows for independent bad pixel masks for each input image which was not supported previously. (6/21/00, Valdes) pkg/images/immatch/src/imcombine/icmedian.gx Replaced median algorithm with the faster Wirth algorithm. (5/16/00, Valdes) pkg/images/lib/skywcs.x Incorrect values for the epoch of observations were being computed and printed by tasks like skyctran and imcctran if the input coordinate system was read from an image and the input coordinate system was galactic. The problem was that the epoch was being converted to MJD twice instead of once. Unless a proper motion correction was being computed this problem should have little practical effect although it is disturbing to odd units in the file headers. (1/31/00, Davis) pkg/images/immatch/doc/imcombine.hlp pkg/images/immatch/imcombine.par The "outtype" parameter can take the value "none" in addition to one of the standard datatypes. The help page was incorrect/unclear what was meant by not specifying an output type. (1/18/00, Valdes) pkg/images/immatch/src/imcombine/icgdata.gx pkg/images/immatch/src/imcombine/iclog.x pkg/images/immatch/src/imcombine/icmask.x pkg/images/immatch/src/imcombine/icombine.gx pkg/images/immatch/src/imcombine/icscale.x pkg/images/immatch/src/imcombine/icsetout.x Changed declarations for the array "out" to be ARB rather than 3 in some places (because it was not changed when another element was added) or 4. This will insure that any future output elements added will no require changing these arguments for the sake of cosmetic correctness. (1/13/00, Valdes) pkg/images/immatch/src/imcombine/icsetout.x Fixed error with MWCS dimension mismatch when using offsets on input images which have been dimensionally reduced. (1/12/00, Valdes) ======== V2.11.3a ======== ======= V2.11.3 ======= pkg/images/imfilter/src/fmedian.x pkg/images/imfilter/src/fmode.x pkg/images/imfilter/src/frmedian.x pkg/images/imfilter/src/frmode.x pkg/images/imfilter/src/fmd_hist.x Changed the fast median / mode histogram storage from short to int to avoid overflows in the case that xfilter * yfilter > 32767 and > 32767 pixels fall into a single bin as may happen in bad pixel regions. (11/19/99, Davis) pkg/images/immatch/src/imcombine/icombine.gx An input array was declared with a value of 3 though it was passed to the routine with 4 elements. Later there was a reference to the 4th element. While this is legal as the size in the declaration is a dummy this was a compiler error on one platform. Changed the declaration to 4. (11/19/99, Valdes) pkg/images/immatch/src/imcombine/t_imcombine.x A call to IMUNMAP within the THEN clause of an IFERR replaces the error string (inappropriately) so that a later ERRACT reports the wrong error. The code was modified to get the error string before calling IMUNMAP and then restores the error condition with an ERROR call instead of an ERRACT. (10/21/99, Valdes) pkg/images/immatch/src/imcombine/t_imcombine.x Modified error recovery to avoid a tranfer out of an IFERR block message. (10/14/99, Valdes) pkg/images/immatch/doc/imcombine.hlp Updated the expected number of images that can be combined without stacking. (10/11/99, Valdes) pkg/images/imcoords/src/mkpkg pkg/images/imgeom/src/mkpkg pkg/images/immmatch/src/imcombine/generic/mkpkg pkg/images/immmatch/src/imcombine/mkpkg pkg/images/immmatch/src/imutil/generic/mkpkg pkg/images/immmatch/src/imutil/mkpkg Added some missing file dependencies and removed some uneccessary ones from the mkpkg files. (9/21/99, Davis) ======= V2.11.2 ======= pkg/images/imutil/src/t_imarith.x Added a check for division by zero in the header keywords. A warning is printed, the keyword is not updated, and task completes without aborting. (8/10/99, Valdes) pkg/images/imcoords/src/t_ccsetwcs.x pkg/images/imcoords/src/ccxytran.x Update the ccsetwcs and cctran tasks so they can deal correctly with the zpx transformation. These tasks had been updated in immatchx but the updates did not make it into the images versions of the tasks. (Davis, June 26, 1999) pkg/images/imcoords/src/t_starfind.x Modified the default output file naming code to deal rationally with fits image extension names. (Davis, June 26, 1999) pkg/images/lib/skywcs.h pkg/images/lib/skywcs.x pkg/images/imcoords/src/ttycur.key pkg/images/imcoords/src/skycur.key pkg/images/imcoords/doc/ccfind.hlp pkg/images/imcoords/doc/ccmap.hlp pkg/images/imcoords/doc/ccsetwcs.hlp pkg/images/imcoords/doc/skyctran.hlp pkg/images/imcoords/doc/imcctran.hlp Added support for the ICRS system to the images.imcoords package. (Davis, June 24, 1999) pkg/images/immatch/doc/geomap.hlp Added some notes and an example to explain and illustrate the role of the reference and input coordinates for different applicatons. i.e. image resampling and coordinate transformation. (Davis, June 18, 1999) pkg/images/immatch/src/geometry/t_geotran.x Fixed a bug in the transform list decoding routine that was preventing geotran from using the same transform for all the input images. (Davis, June 18, 1999) pkg/images/immatch/src/imcombine/icsetout.x Changed to better parse the offset types. The WCS correction for offsets was incorrect. (6/17/99, Valdes) pkg/images/imcoords/src/t_wcsctran.x Fixed a bug in the units initialization code. (Davis, June 3, 1999) pkg/images/imcoords/src/t_ccsetwcs.x Improved the error message handling in the case when a database records either not be found or could not be successfully decoded in the ccsetwcs task. (Davis, June 3, 1999) pkg/images/immatch/src/geometry/geotran.x Fixed a type mismatch problem in a call to max that was causing compilation errors on the Dec Station. (Davis, June 2, 1999) pkg/images/immatch/doc/imcombine.hlp Clarified whether the offset is done before scaling or afterword. (5/18/99, Valdes) pkg/images/imcoords/doc/ccsetwcs.hlp pkg/images/imcoords/doc/imcctran.hlp pkg/images/imcoords/doc/skyctran.hlp pkg/images/immatch/doc/skyxymatch.hlp Added some information about the new DATE-OBS format to the help pages for the ccsetwcs, imctran, skyctran, and skyxymatch tasks. (Davis, May 13, 1999) pkg/images/lib/skywcs.x Added support for the new DATE-OBS format to the mwcs decoding routines. All tasks in the imcoords and immatch packages which read the image wcs will pick up the change. (Davis, May 13, 1999) pkg/images/immatch/src/listmatch/t_xyxymatch.x pkg/images/imcoords/src/t_ccxymatch.x Fixed the xyxymatch and ccxymatch tasks so that they work properly when the number of reference files is greater than 1 and equal to the number of input files. In that case xyxymatch and ccxymatch are supposed to pair up the input and reference files one to one instead of using the last file in the reference file list. (Davis, February 22, 1999) pkg/images/immatch/src/wcsmatch/t_wcscopy.x Modified wcscopy to update the RADECSYS, EQUINOX, and MJD-WCS keywords as well as the mwcs keywords. (1/7/99, Davis) pkg/images/immatch/gregister.par pkg/images/immatch/sregister.cl pkg/images/immatch/wregister.cl pkg/images/immatch/doc/gregister.hlp pkg/images/immatch/doc/sregister.hlp pkg/images/immatch/doc/wregister.hlp Installed new versions of the gregister, sregister, and wregister tasks (these tasks are scripts which call geotran) which support 1D and 2D sinc and look-up table sinc interpolation and 2D drizzle resampling. (12/29/98, Davis) pkg/images/imgeom/rotate.par pkg/images/imgeom/imlintran.par pkg/images/imgeom/doc/rotate.hlp pkg/images/imgeom/doc/imlintran.hlp Installed new versions of the rotate and imlintran tasks (these tasks are scripts which call geotran) which support 2D sinc and look-up table sinc interpolation and 2D drizzle resampling. (12/29/98, Davis) pkg/images/immmatch/geotran.par pkg/images/immatch/src/geometry/geotran.h pkg/images/immatch/src/geometry/t_geotran.x pkg/images/immatch/src/geometry/geotran.x pkg/images/immatch/src/geometry/geotimtran.x pkg/images/immatch/doc/geotran.hlp Installed a new version of the geotran task which supports 1D and 2D sinc and look-up table sinc interpolation and 1D and 2D drizzle resampling. Simplified the code and modified the out-of-bounds pixel handling algorithm to conform to the other image resampling tasks. Corrected a couple of bugs in the 1D image resampling code. (12/29/98, Davis) pkg/images/immatch/xregister.par pkg/images/immatch/src/t_xregister.x pkg/images/immatch/src/rgximshift.x pkg/images/imgeom/doc/xregister.hlp Installed a new version of the xregister task which supports 2D sinc and look-up table sinc interpolation and 2D drizzle resampling. (12/29/98, Davis) pkg/images/imgeom/shiftlines.par pkg/images/imgeom/src/t_shiftlines.x pkg/images/imgeom/src/shiftlines.x pkg/images/imgeom/doc/shiftlines.hlp Installed a new version of the shiftlines task which supports 1D sinc and look-up table sinc interpolation and 1D drizzle resampling. (12/28/98, Davis) pkg/images/imgeom/imshift.par pkg/images/imgeom/src/t_imshift.x pkg/images/imgeom/doc/imshift.hlp Installed a new version of the imshift task which supports 2D sinc and look-up table sinc interpolation and 2D drizzle resampling. (12/28/98, Davis) pkg/images/imgeom/magnify.par pkg/images/imgeom/src/t_magnify.x pkg/images/imgeom/doc/magnify.hlp Installed a new version of the magnify task which supports 1D and 2D sinc and look-up table sinc interpolation and 1D and 2D drizzle resampling. Modified the out-of-bounds pixel handling algorithm to conform to the other image resampling tasks. (12/28/98, Davis) pkg/images/immatch/src/imcombine/icsetout.x Fixed a problem with input images that have dimensional reduction. (10/6/98, Valdes) pkg/images/imutil/src/t_imarith.x If noact = yes, IMARITH would fail with a segmentation violation. This was occuring because the header updating code was trying to access the output image which did not exist. (9/16/98, Davis) pkg/images/tv/imexamine/stfmeasure.x The logic in STF_FIT for determining the points to fit and the point to use for the initial width estimate was faulty allowing some bad cases to get through. (7/31/98, Valdes) pkg/images/immatch/src/imcombine/icgdata.gx Needed to initialize the number of pixels combined for the case where there is initially no data. (7/29/98, Valdes) pkg/images/immatch/src/imcombine/t_imcombine.x pkg/images/immatch/doc/imcombine.hlp The internal calculation type was changed from the highest precedence type of the input images to the highest of the input and output. This allows setting the output type to be real to force computation in real for integer input images. Not doing this could cause severe truncation errors if the users specify there own scaling values. (7/14/98, Valdes) pkg/images/tv/imedit/epix.h pkg/images/tv/imedit/t_imedit.x pkg/images/tv/imedit/epcolon.x pkg/images/tv/doc/imedit.hlp The temporary editing buffer image was made into a unique temporary image rather than the fixed name of "epixbuf". (6/30/98, Valdes) pkg/images/tv/display/dspmmap.x The steps to check if an image and mask have an integer relationship (integer sampling and integer offsets) in their physical coordinate systems could fail because real precision was not high enough in MWCS transformation calls. Changed variables and MWCS calls to double. (5/29/98, Valdes) pkg/images/immatch/src/imcombine/t_imcombine.x pkg/images/immatch/src/imcombine/icombine.gx pkg/images/immatch/src/imcombine/ic_rmasks.x + pkg/images/immatch/src/imcombine/ic_log.x pkg/images/immatch/src/imcombine/mkpkg pkg/images/immatch/imcombine.par pkg/images/immatch/doc/imcombine.hlp Added a new output which is a pixel mask identifying which pixel in which input image is rejected or not included in the final output. (5/15/98, Valdes) pkg/lib/geograph.gx pkg/lib/geograph.x Modifed the plot labels to say "reject =" instead of "sigrej = " to maintain naming consistency with the reject parameter. (2/23/98 LED) pkg/images/immatch/src/imcombine/icsetout.x The updating of the WCS for offset images was not being done correctly. (2/5/98, Valdes) pkg/images/immatch/src/imcombine/icgrow.gx pkg/images/immatch/src/imcombine/icombine.gx Modified algorithm for efficiency. (1/28/98, Valdes) pkg/images/immatch/src/imcombine/t_imcombine.x pkg/images/immatch/src/imcombine/icaclip.gx pkg/images/immatch/src/imcombine/iccclip.gx pkg/images/immatch/src/imcombine/icgdata.gx pkg/images/immatch/src/imcombine/icgrow.gx pkg/images/immatch/src/imcombine/iclog.x pkg/images/immatch/src/imcombine/icmm.gx pkg/images/immatch/src/imcombine/icombine.com pkg/images/immatch/src/imcombine/icombine.gx pkg/images/immatch/src/imcombine/icpclip.gx pkg/images/immatch/src/imcombine/icsclip.gx pkg/images/immatch/imcombine.par Changed the grow parameter to a real radius. (12/30/97, Valdes) pkg/images/immatch/src/imcombine/icgrow.gx pkg/images/immatch/src/imcombine/icombine.gx pkg/images/immatch/doc/imcombine.hlp Added 2D grow capability. (12/30/97, Valdes) pkg/images/immatch/src/imcombine/icaverage.gx pkg/images/immatch/src/imcombine/icmedian.gx pkg/images/immatch/src/imcombine/icombine.gx pkg/images/immatch/src/imcombine/generic/mkpkg Added new argument to select whether to set values with no data to a blank value. This allows the calling task to set values without having them overridden with the blank value. (12/30/97, Valdes) pkg/images/immatch/src/imcombine/icmm.gx Fixed a bug where the image IDs were not being kept. (12/30/97, Valdes) ======= V2.11.1 ======= pkg/images/immatch/src/linmatch/lsqfit.h pkg/images/immatch/src/linmatch/rglscale.x pkg/images/immatch/src/linmatch/rgliscale.x pkg/images/immatch/src/linmatch/rglsqfit.x pkg/images/immatch/src/linmatch/rglplot.x Fixed several bugs in the linmatch bad region handling code. The bad region flag was not being set if the input image regions were partially of the image or the sizes of the input reference and input regions were different image, the error status flag was not being correctly set after a bad region was detected, and the linear least squares fits were not being properly protected against bad data regions, and non-physical data fits. The graphics routines were also changed to force windowing around the good data points. (12/19/97, Davis) pkg/images/immatch/src/linmatch/rglscale.x The linmatch task could produce a floating operand error if the fitting algorithm was "mean", "median", or "mode", and one or more of the reference image regions had a mean, median, or mode values of 0.0. (12/15/97, Davis) pkg/images/imutil/src/imcopy.x pkg/images/lib/imcopy.x There were two different versions of the imcopy.x file in the images packages which were causing different behavior in the imcopy task. Updated the version in the lib subdirectory and deleted the version in imutil/src. (11/18/97, Davis) pkg/images/imfilter/src/t_median.x pkg/images/imfilter/src/t_mode.x The constant for constant boundary extension was declared as in integer instead of a real in the median and mode tasks causing an FPE error on the Dec Alpha if the value could not be converted. A value of 0 for constant would work correctly. (11/11/97, Davis) pkg/images/immatch/src/imcombine/t_imcombine.x When using STF images the failure error when there are too many images is SYS_IKIOPEN rather than the others that occur with OIF, etc. Added this error code to be caught and have the program build a stacked image to combine. (10/21/97, Valdes) pkg/images/immatch/src/imcombine/icscale.x pkg/images/immatch/doc/imcombine.hlp When the zero offsets or weights are specified in a file the weight adjustment for differeing sky levels is not done. (10/3/97, Valdes) ===== V2.11 ===== pkg/images/imutil/src/t_imtile.x Modified the imtile task to avoid a potential divide by zero error in the range decoding software. This error was actually due to an interface change to the xtools$ranges.x code, which has since been changed back, but the potential for error was there. (8/22/97, Davis) pkg/images/imcoords/src/sffind.x Fixed a type mismatch in the call to atan2. (8/18/97, LED) pkg/images/immatch/src/imcombine/t_imcombine.x Fixed a segmentation violation caused by attempting to close the mask data structures during error recovery when the error occurs before the data structures are defined. (8/14/97, Valdes) pkg/images/imutil/src/imhistogram.x Fixed a bug in the imhistogram and phistogram tasks that could cause an invalid floating point operation if the image contained pixels outside the valid integer range. (7/31/97, Davis) pkg/images/immatch/src/xregister/rgxcorr.x Fixed a bug in xregister that could occur if: the correlation parameter was set to "fourier" and one of the correlation regions was completely off the input image. In this case all the region shifts following the first bad one were being set to INDEF. (7/25/97, Davis) pkg/images/lib/skywcs.x Modified the coordinates structure initialization routine to explictly set the physical and logical axis maps on startup rather than leaving them undefined. (6/16/97, Davis) pkg/images/immatch/wcsxymatch.par pkg/images/immatch/wcsmap.cl pkg/images/immatch/wregister.cl pkg/images/immatch/doc/wcsxymatch.hlp pkg/images/immatch/doc/wcsmap.hlp pkg/images/immatch/doc/wregister.hlp pkg/images/immatch/src/wcsmatch/t_wcsxymatch.hlp Added the transpose parameter to the wcsxymatch, wcsmap, and wregister task to permit users to force an image transpose in cases where the image wcs does not contain enough information, e.g. axtype is undefined or set to the same units. (6/10/97, Davis) pkg/images/immatch/geomap.par pkg/images/immatch/skymap.cl pkg/images/immatch/wcsmap.cl pkg/images/immatch/sregister.cl pkg/images/immatch/wregister.cl pkg/images/immatch/doc/geomap.hlp pkg/images/immatch/doc/skymap.hlp pkg/images/immatch/doc/wcsmap.hlp pkg/images/immatch/doc/wregister.hlp pkg/images/immatch/doc/sregister.hlp pkg/images/immatch/src/geometry/geoxytran.gx pkg/images/immatch/src/geometry/geoxytran.x pkg/images/immatch/src/geometry/t_geomap.gx pkg/images/immatch/src/geometry/t_geomap.x pkg/images/immatch/src/geometry/t_geotran.x pkg/images/immatch/src/psfmatch/rgpbckgrd.x pkg/images/immatch/src/xregister/rgxbckgrd.x pkg/images/imcoords/ccmap.par pkg/images/imcoords/doc/ccmap.hlp pkg/images/imcoords/src/t_ccmap.x pkg/images/imcoords/src/t_imcctran.x pkg/images/lib/coomap.key pkg/images/lib/geofit.gx pkg/images/lib/geofit.x pkg/images/lib/geograph.gx pkg/images/lib/geograph.x pkg/images/lib/geomap.h pkg/images/lib/geomap.key pkg/images/lib/rgtransform.x Modifed the geomap, wcsmap, skymap, wregister, sregister, and ccmap tasks to use the new cross terms option in the gsurfit library. This involved changing two boolean parameters in each task to string parameters, making the interactive fitting software shared by all these tasks aware of the change, and modifying the gsinit calls to do the initialization properly. (5/1/97, Davis) pkg/images/immatch/src/t_geotran.x pkg/images/immatch/src/geotran.x Fixed various bugs triggered by the case where the user sets xmin, xmax, ymin, or ymax, explicitly, and xmin > xmax or ymin > ymax. Improved the precision of the flux conservation algorithm at the same time. (4/30/97, Davis) pkg/images/imutil/src/imcopy.x Changed imcopy so that it ignores the output image section if the input and output root names are the same, making its behavior consistent with other images package tasks which can overwrite the input image. (4/24/97, Davis) pkg/images/immatch/doc/imcombine.hlp Minor readability changes. (4/14/97, Valdes) =============================== Package Reorganization =============================== pkg/images/imarith/t_imsum.x pkg/images/imarith/t_imcombine.x pkg/images/doc/imsum.hlp pkg/images/doc/imcombine.hlp Provided options for USHORT data. (12/10/96, Valdes) pkg/images/imarith/icsetout.x pkg/images/doc/imcombine.hlp A new option for computing offsets from the image WCS has been added. (11/30/96, Valdes) pkg/images/imarith/t_imcombine.x pkg/images/imarith/icombine.gx Changed the error checking to catch additional errors relating to too many files. (11/12/96, Valdes) pkg/images/imarith/icsort.gx There was an error in the ic_2sort routine when there are exactly three images that one of the explicit cases did not properly keep the image identifications. See buglog 344. (8/1/96, Valdes) pkg/images/filters/median.x The routine mde_yefilter was being called with the wrong number of arguments. (7/18/96, Davis) pkg/images/imarith/t_imcombine.x pkg/images/imarith/icombine.gx pkg/images/imarith/icimstack.x + pkg/images/imarith/iclog.x pkg/images/imarith/mkpkg pkg/images/doc/imcombine.hlp The limit on the maximum number of images that can be combined, set by the maximum number of logical file descriptors, has been removed. If the condition of too many files is detected the task now automatically stacks all the images in a temporary image and then combines them with the project option. (5/14/96, Valdes) pkg/images/geometry/xregister/rgxfit.x Changed several Memr[] references to Memi[] in the rg_fit routine. This bug was causing a floating point error in the xregister task on the Dec Alpha if the coords file was defined, and could potentially cause problems on other machines. (Davis, April 3, 1996) pkg/images/geometry/t_geotran.x pkg/images/geometry/geograph.x pkg/images/doc/geomap.hlp Corrected the definition of skew in the routines which compute a geometric interpretation of the 6-coefficient fit, which compute the coefficients from the geometric parameters, and in the relevant help pages. (2/19/96, Davis) pkg/images/median.par pkg/images/rmedian.par pkg/images/mode.par pkg/images/rmode.par pkg/images/fmedian.par pkg/images/frmedian.par pkg/images/fmode.par pkg/images/frmode.par pkg/images/doc/median.hlp pkg/images/doc/rmedian.hlp pkg/images/doc/mode.hlp pkg/images/doc/rmode.hlp pkg/images/doc/fmedian.hlp pkg/images/doc/frmedian.hlp pkg/images/doc/fmode.hlp pkg/images/doc/frmode.hlp pkg/images/filters/t_median.x pkg/images/filters/t_rmedian.x pkg/images/filters/t_mode.x pkg/images/filters/t_rmode.x pkg/images/filters/t_fmedian.x pkg/images/filters/t_frmedian.x pkg/images/filters/t_fmode.x pkg/images/filters/t_frmode.x Added a verbose parameter to the median, rmedian, mode, rmode, fmedian, frmedian, fmode, and frmode tasks. (11/27/95, Davis) pkg/images/geometry/doc/geotran.hlp Fixed an error in the help page for geotran. The default values for the xscale and yscale parameters were incorrectly listed as INDEF, INDEF instead of 1.0, 1.0. (11/14/95, Davis) pkg/images/imarith/icpclip.gx Fixed a bug where a variable was improperly used for two different purposes causing the algorithm to fail (bug 316). (10/19/95, Valdes) pkg/images/doc/imcombine.hlp Clarified a point about how the sigma is calculated with the SIGCLIP option. (10/11/95, Valdes) pkg/images/imarith/icombine.gx To deal with the case of readnoise=0. and image data which has points with negative mean or median and very small minimum readnoise is set internally to avoid computing a zero sigma and dividing by it. This applies to the noise model rejection options. (8/11/95, Valdes) pkg/images/frmedian.hlp pkg/images/frmode.hlp pkg/images/rmedian.hlp pkg/images/rmode.hlp pkg/images/frmedian.par pkg/images/frmode.par pkg/images/rmedian.par pkg/images/rmode.par pkg/images/filters/frmedian.h pkg/images/filters/frmode.h pkg/images/filters/rmedian.h pkg/images/filters/rmode.h pkg/images/filters/t_frmedian.x pkg/images/filters/t_frmode.x pkg/images/filters/t_rmedian.x pkg/images/filters/t_rmode.x pkg/images/filters/frmedian.x pkg/images/filters/frmode.x pkg/images/filters/rmedian.x pkg/images/filters/rmode.x pkg/images/filters/med_utils.x Added new ring median and modal filtering tasks frmedian, rmedian, frmode, and rmode to the images package. (6/20/95, Davis) pkg/images/fmedian.hlp pkg/images/fmode.hlp pkg/images/median.hlp pkg/images/mode.hlp pkg/images/fmedian.par pkg/images/fmode.par pkg/images/median.par pkg/images/mode.par pkg/images/filters/fmedian.h pkg/images/filters/fmode.h pkg/images/filters/median.h pkg/images/filters/mode.h pkg/images/filters/t_fmedian.x pkg/images/filters/t_fmode.x pkg/images/filters/t_median.x pkg/images/filters/t_mode.x pkg/images/filters/fmedian.x pkg/images/filters/fmode.x pkg/images/filters/median.x pkg/images/filters/mode.x pkg/images/filters/fmd_buf.x pkg/images/filters/fmd_hist.x pkg/images/filters/fmd_maxmin.x pkg/images/filters/med_buf.x pkg/images/filters/med_sort.x Added minimum and maximum good data parameters to the fmedian, fmode, median, and mode filtering tasks. Removed the 64X64 kernel size limit in the median and mode tasks. Replaced the common blocks with structures and .h files. (6/20/95, Davis) pkg/images/geometry/t_geotran.x pkg/images/geometry/geotran.x pkg/images/geometry/geotimtran.x Fixed a bug in the buffering of the x and y coordinate surface interpolants which can cause a memory corruption error if, nthe nxsample or nysample parameters are > 1, and the nxblock or nyblock parameters are less than the x and y dimensions of the input image. Took the opportunity to clean up the code. (6/13/95, Davis) ======= V2.10.4 ======= pkg/images/geometry/t_geomap.x Corrected a harmless typo in the code which determines the minimum and maximum x values and improved the precision of the test when the input is double precision. (4/18/95, Davis) pkg/images/doc/fit1d.hlp Added a description of the interactive parameter to the fit1d help page. (4/17/95, Davis) pkg/images/imarith/t_imcombine.x If an error occurs while opening an input image header the error recovery will close all open images and then propagate the error. For the case of running out of file descriptors with STF format images this will allow the error message to be printed rather than the error code. (4/3/95, Valdes) pkg/images/geometry/xregister/t_xregister.x Added a test on the status code returned from the fitting routine so the xregister tasks does not go ahead and write an output image when the user quits the task in in interactive mode. (3/31/95, Davis) pkg/images/imarith/icscale.x pkg/images/doc/imcombine.hlp The behavior of the weights when using both multiplicative and zero point scaling was incorrect; the zero levels have to account for the scaling. (3/27/95, Valdes) pkg/images/geometry/xregister/rgxtools.x Changed some amovr and amovi calls to amovkr and amovki calls. (3/15/95, Davis) pkg/images/geometry/t_imshift.x pkg/images/geometry/t_magnify.x pkg/images/geometry/geotran.x pkg/images/geometry/xregister/rgximshift.x The buffering margins set for the bicubic spline interpolants were increased to improve the flux conservation properties of the interpolant in cases where the data is undersampled. (12/6/94, Davis) pkg/images/xregister/rgxbckgrd.x In several places the construct array[1++nx-wborder] was being used instead of array[1+nx-wborder]. Apparently caused by a typo which propagated through the code, the Sun compilers did not catch this, but the IBM/RISC6000 compilers did. (11/16/94, Davis) pkg/images/xregister.par pkg/images/doc/xregister.hlp pkg/images/geometry/xregister/t_xregister.x pkg/images/geometry/xregister/rgxcorr.x pkg/images/geometry/xregister/rgxicorr.x pkg/images/geometry/xregister/rgxcolon.x pkg/images/geometry/xregister/rgxdbio.x The xregister task was modified to to write the output shifts file in either text database format (the current default) or in simple text format. The change was made so that the output of xregister could both be edited more easily by the user and be used directly with the imshift task. (11/11/94, Davis) pkg/images/imfit/fit1d.x A Memc in the ratio output option was incorrectly used instead of Memr when the bug fix of 11/16/93 was made. (10/14/94, Valdes) pkg/images/geometry/xregister/rgxcorr.x The procedure rg_xlaplace was being incorrectly declared as an integer procedure. (8/1/94, Davis) pkg/images/geometry/xregister/rgxregions.x The routine strncmp was being called (with a missing number of characters argument) instead of strcmp. This was causing a bus error under solaris but not sun os whenever the user set regions to "grid ...". (7/27/94 LED) pkg/images/tv/imexaine/ierimexam.x The Gaussian fitting can return a negative sigma**2 which would cause an FPE when the square root is taken. This will only occur when there is no reasonable signal. The results of the gaussian fitting are now set to INDEF if this unphysical result occurs. (7/7/94, Valdes) pkg/images/geometry/geofit.x A routine expecting two char arrays was being passed two real arrays instead resulting in a segmentation violation if calctype=real and reject > 0. (6/21/94, Davis) pkg/images/imarith/t_imarith.x IMARITH now deletes the CCDMEAN keyword if present. (6/21/94, Valdes) pkg/images/imarith/icaclip.gx pkg/images/imarith/iccclip.gx pkg/images/imarith/icpclip.gx pkg/images/imarith/icsclip.gx 1. The restoration of deleted pixels to satisfy the nkeep parameter was being done inside the iteration loop causing the possiblity of a non-terminating loop; i.e. pixels are rejected, they are restored, and the number left then does not statisfy the termination condition. The restoration step was moved following the iterative rejection. 2. The restoration was also incorrectly when mclip=no and could lead to a segmentation violation. (6/13/94, Valdes) pkg/images/geometry/xregister/rgxicorr.x The path names to the xregister task interactive help files was incorrect. (6/13/94, Davis) pkg/images/imarith/iccclip.gx pkg/images/imarith/icsclip.gx Found and fixed another typo bug. (6/7/94, Valdes/Zhang) pkg/images/imarith/icscale.x The sigma scaling flag, doscale1, would not be set in the case of a mean offset of zero though the scale factors could be different. (5/25/94, Valdes/Zhang) pkg/images/imarith/icsclip.gx There was a missing line: l = Memi[mp1]. (5/25/94, Valdes/Zhang) pkg/images/imarith/icaclip.gx pkg/images/imarith/iccclip.gx pkg/images/imarith/icpclip.gx pkg/images/imarith/icsclip.gx The reordering step when a central median is used during rejection but the final combining is average was incorrect if the number of rejected low pixels was greater than the number of pixel number of pixels not rejected. (5/25/94, Valdes) pkg/images/geometry/t_geotran.x In cases where there was no input geomap database, geotran was unnecessarily overiding the size of the input image requested by the user if the size of the image was bigger than the default output size (the size of the output image which would include all the input image pixels is no user shifts were applied). (5/10/94, Davis) pkg/images/imarith/icscale.x pkg/images/imarith/t_imcombine.x 1. There is now a warning error if the scale, zero, or weight type is unknown. 2. An sfree was being called before the allocated memory was finished being used. (5/2/94, Valdes) pkg/images/tv/imexaine/ierimexam.x For some objects the moment analysis could fail producing a floating overflow error in imexamine, because the code was trying to use INDEF as the initial value of the object fwhm. Changed the gaussian fitting code to use a fraction of the fitting radius as the initial value for the fitted full-width half-maximum in cases where the moment analysis cannot compute an initial value. (4/15/94 LED) pkg/images/imarith/iclog.x Changed the mean, median, mode, and zero formats from 6g to 7.5g to insure 5 significant digits regardless of signs and decimal points. (4/13/94, Valdes) pkg/images/doc/imcombine.hlp Tried again to clarify the scaling as multiplicative and the offseting as additive for file input and for log output. (3/22/94, Valdes) pkg/images/imarith/iacclip.gx pkg/images/imarith/iccclip.gx pkg/images/imarith/iscclip.gx The image sigma was incorrectly computed when an offset scaling is used. (3/8/94, Valdes) pkg/images/doc/imcombine.hlp The MINMAX example confused low and high. (3/7/94, Valdes) pkg/images/geometry/t_geomap.x pkg/images/geometry/geofit.x pkg/images/geometry/geograph.x Fixed a bug in the geomap code which caused the linear portion of the transformation to be computed incorrectly if the x and y fits had a different functional form. (12/29/93, Davis) pkg/images/imarith/t_imcombine.x pkg/images/imcombine.par pkg/images/do/imcombine.hlp The output pixel datatypes now include unsigned short integer. (12/4/93, Valdes) pkg/images/doc/imcombine.hlp Fixed an error in the example of offseting. (11/23/93, Valdes) pkg/images/imfit/fit1d.x When doing operations in place the input and output buffers are the same and the difference and ratio operations assumed they were not causing the final results to be wrong. (11/16/93, Valdes) pkg/images/imarith/t_imarith.x pkg/images/doc/imarith.hlp If no calculation type is specified then it will be at least real for a division. Since the output pixel type defaults to the calculation type if not specified this will also result in a real output if dividing two integer images. (11/12/93, Valdes) pkg/images/imarith/icgrow.gx pkg/images/imarith/icpclip.gx pkg/images/imarith/icsclip.gx pkg/images/imarith/icaclip.gx pkg/images/imarith/iccclip.gx pkg/images/imarith/t_imcombine.x pkg/images/doc/imcombine.hlp If there were fewer initial pixels than specified by nkeep then the task would attempt to add garbage data to achieve nkeep pixels. This could occur when using offsets, bad pixel masks, or thresholds. The code was changed to check against the initial number of pixels rather than the number of images. Also a negative nkeep is no longer converted to a positive value based on the number of images. Instead it specifies the maximum number of pixels to reject from the initial set of pixels. (11/8/93, Valdes) ======= V2.10.2 ======= pkg/images/imarith/icsetout.x Added MWCS calls to update the axis mapping when using the project option in IMCOMBINE. (10/8/93, Valdes) pkg$images/imarith/icscale.x pkg$images/doc/imcombine.hlp The help indicated that user input scale or zero level factors by an @file or keyword are multiplicative and additive while the task was using then as divisive and subtractive. This was corrected to agree with the intend of the documentation. Also the factors are no longer normalized. (9/24/93, Valdes) pkg$images/imarith/icsetout.x The case in which absolute offsets are specified but the offsets are all the same did not work correctly. (9/24/93, Valdes) pkg$images/imfit/imsurfit.h pkg$images/imfit/t_imsurfit.x pkg$images/imfit/imsurfit.x pkg$images/lib/ranges.x Fixed two bugs in the imsurfit task bad pixel rejection code. For low k-sigma rejections factors the bad pixel list could overflow resulting in a segmentation violation or a hung task. Overlapping ranges were not being decoded into a bad pixel list properly resulting in oscillating bad pixel rejection behavior where certain groups of bad pixels were alternately being included and excluded from the fit. Both bugs are fixed in iraf 2.10.3 (9/21/93, Davis) pkg$images/doc/imcombine.hlp Clarified how bad pixel masks work with the "project" option. (9/13/93, Valdes) pkg$images/imfit/fit1d.x When the input and output images are the same there was an typo error such that the output was opened separately but then never unmapped resulting in the end of the image not being updated. (8/6/93, Valdes) pkg$images/imarith/t_imcombine.x The algorithm for making sure there are enough file descriptors failed to account for the need to reopen the output image header for an update. Thus when the number of input images + output images + logfile was exactly 60 the task would fail. The update occurs when the output image is unmapped so the solution was to close the input images first except for the first image whose pointer is used in the new copy of the output image. (8/4/93, Valdes) pkg$images/filters/t_mode.x pkg$images/filters/t_median.x Fixed a bug in the error trapping code in the median and mode tasks. The call to eprintf contained an extra invalid error code agument. (7/28/93, Davis) pkg$images/geometry/geomap.par pkg$images/geometry/t_geomap.x pkg$images/geometry/geogmap.x pkg$images/geometry/geofit.x Fixed a bug in the error handling code in geomap which was producing a segmentation violation on exit if the user's coordinate list had fewer than 3 data points. Also improved the error messages presented to the user in both interactive and non-interactive mode. (7/7/93, Davis) pkg$images/imarith/icgdata.gx There was an indexing error in setting up the ID array when using the grow option. This caused the CRREJECT/CCDCLIP algorithm to fail with a floating divide by zero error when there were non-zero shifts. (5/26/93, Valdes) pkg$images/imarith/icmedian.gx The median calculation is now done so that the original input data is not lost. This slightly greater inefficiency is required so that an output sigma image may be computed if desired. (5/10/93, Valdes) pkg$images/geometry/t_imshift.x Added support for type ushort to the imshift task in cases where the pixel shifts are integral. (5/8/93, Davis) pkg$images/doc/rotate.hlp Fixed a bug in the rotate task help page which implied that automatic image size computation would occur if ncols or nlines were set no 0 instead of ncols and nlines. (4/17/93, Davis) pkg$images/imarith/imcombine.gx There was no error checking when writing to the output image. If an error occurred (the example being when an imaccessible imdir was set) obscure messages would result. Errchks were added. (4/16/93, Valdes) pkg$images/doc/gauss.hlp Fixed 2 sign errors in the equations in the documentation describing the elliptical gaussian fucntion. (4/13/92, Davis) pkg/images/imutil/t_imslice.x Removed an error check in the imslice task, which was preventing it from being used to reduce the dimensionality of images where the length of the slice dimension is 1.0. (2/16/83, Davis) pkg/images/filters/fmedian.x The fmedian task was printing debugging information under iraf 2.10.2. (1/25/93, Davis) pkg/images/imarith/icaclip.gx pkg/images/imarith/iccclip.gx pkg/images/imarith/icpclip.gx pkg/images/imarith/icsclip.gx When using mclip=yes and when more pixels are rejected than allowed by the nkeep parameter there was a subtle bug in how the pixels are added back which can result in a segmentation violation. if (nh == n2) ==> if (nh == n[i]) (1/20/93, Valdes) ======= V2.10.1 ======= pkg/images/imarith/t_imcombine.x pkg/images/imarith/icaclip.gx pkg/images/imarith/iccclip.gx pkg/images/imarith/icgrow.gx pkg/images/imarith/iclog.x pkg/images/imarith/icombine.com pkg/images/imarith/icombine.gx pkg/images/imarith/icombine.h pkg/images/imarith/icpclip.gx pkg/images/imarith/icscale.x pkg/images/imarith/icsclip.gx pkg/images/imarith/icsetout.x pkg/images/imcombine.par pkg/images/doc/combine.hlp The weighting was changed from using the square root of the exposure time or image statistics to using the values directly. This corresponds to variance weighting. Other options for specifying the scaling and weighting factors were added; namely from a file or from a different image header keyword. The \fInkeep\fR parameter was added to allow controlling the maximum number of pixels to be rejected by the clipping algorithms. The \fIsnoise\fR parameter was added to include a sensitivity or scale noise component to the noise model. Errors will now delete the output image. (9/30/92, Valdes) pkg/images/imutil/imcopy.x Added a call to flush after the status line printout so that the output will appear immediately. (8/19/92, Davis) pkg/images/filters/mkpkg pkg/images/filters/t_fmedian.x pkg/images/filters/fmedian.x pkg/images/filters/fmd_buf.x pkg/images/filters/fmd_maxmin.x The fmedian task could crash with a segmentation violation if mapping was turned off (hmin = zmin and hmax = zmax) and the input image contained data outside the range defined by zmin and zmax. (8/18/92, Davis) pkg/images/imarith/icaclip.gx pkg/images/imarith/iccclip.gx pkg/images/imarith/icpclip.gx pkg/images/imarith/icsclip.gx There was a very unlikely possibility that if all the input pixels had exactly the same number of rejected pixels the weighted average would be done incorrectly because the dflag would not be set. (8/11/92, Valdes) pkg/images/imarith/icmm.gx This procedure failed to set the dflag resulting in the weighted average being computed in correctly. (8/11/92, Valdes) pkg/images/imfit/fit1d.x At some point changes were made but not documented dealing with image sections on the input/output. The changes seem to have left off the final step of opening the output image using the appropriate image sections. Because of this it is an error to use an image section on an input image when the output image is different; i.e. cl> fit1d dev$pix[200:400,*] junk This has now been fixed. (8/10/92, Valdes) pkg/images/imarith/icscales.x The zero levels were incorrectly scaled twice. (8/10/92, Valdes) pkg/images/imarith/icstat.gx Contained the statement nv = max (1., (Memi[v2+i] - Memi[v1+i]) / Memi[dv+i] + 1) which is max(real,int). Changed the 1. to a 1. (8/10/92, Valdes) pkg$images/imarith/icaclip.gx pkg$images/imarith/iccclip.gx pkg$images/imarith/icsclip.gx These files contained multiple cases (ten or so) of constructs such as "max (1., ...)" or "max (0., ...)" where the ... could be either real or double. In the double cases the DEC compiler complained about a type mismatch since 1. is real. (8/10/92, Valdes) pkg$images/imfit/t_imsurfit.x Fixed a bug in the section reading code. Imsurfit is supposed to switch the order of the section delimiters in x and y if x2 < x1 or y2 < 1. Unfortunately the y test was actually "if (y2 < x1)" instead of "if (y2 < y1)". Whether or not the code actually works correctly depends on the value of x1 relative to y2. This bug was not present in 2.9.1 but is present in subsequent releases. (7/30/92 LED) ======= V2.10.1 ======= pkg$images/filters/t_gauss.x The case theta=90 and ratio > 0.0 but < 1.0 was producing an incorrect convolution if bilinear=yes, because the major axis sigmas being input along the x and y axes were sigma and ratio * sigma respectively instead of ratio * sigma and sigma in this case. pkg$images/imutil/imcopy.x Modified imcopy to write its verbose output to STDOUT instead of STDERR. (6/24/92, Davis) pkg$images/imarith/imcombine.gx The step where impl1$t is called to check if there is enough memory did not set the return buffer because the values are irrelevant for this check. However, depending on history, this buffer could have arbitrary values and later when IMIO attempts to flush this buffer, at least in the case of image type coersion, cause arithmetic errors. The fix was to clear the returned buffers. (4/27/92, Valdes) pkg$images/imutil/t_imstack.x Modified the imslice task to read the old and write a new axis map. (4/23/92, Davis) pkg$images/geometry/t_imslice.x Modified the imslice task to read the old and write a new axis map. (4/23/92, Davis) pkg$images/geometry/t_blkavg.x pkg$images/geometry/t_blkrep.x Modified the calls to mw_shift and mw_scale to explicitly set the number of logical axes instead of using the default of 0. (4/23/92, Davis) pkg$images/geometry/t_imtrans.x Modified imtranspose so that it correctly picks up the axis map and writes it to the output image wcs. (4/23/92, Davis) pkg$images/register.par pkg$images/geotran.par pkg$images/doc/register.hlp pkg$images/doc/geotran.hlp Changed the default values of the parameters xscale and yscale in the register and geotran tasks from INDEF to 1.0 (4/23/92, Davis) pkg$images/geometry/t_imtrans.x pkg$images/doc/imtranspose.hlp Modified the imtranspose task so it does a true transpose of the axes instead of simply modifying the lterm. (4/8/92, Davis) pkg$images/iminfo/listpixels.x Added the formats parameter for formatting the output pixel coordinates to the listpixels task. These formats take precedence over the formats stored in the WCS in the image header and the previous default format. (4/7/92, Davis) pkg$images/imutil/t_imstack.x Added wcs support to the imstack task. (4/2/92, Davis) pkg$images/iminfo/listpixels.x Modified listpixels so that it will work correctly if the dimension of the wcs is less than the dimension of the image. (3/16/92, Davis) pkg$images/geometry/t_geotran.x Modified the rotate, imlintran, register and geotran tasks wcs updating code to deal correclty with dimensionally reduced data. (3/16/92, Davis) pkg$images/imarith/icalip.gx pkg$images/imarith/icclip.gx pkg$images/imarith/ipslip.gx pkg$images/imarith/icslip.gx pkg$images/imarith/icmedian.gx The median calculation with an even number of points for short data could overflow (addition of two short values) and be incorrect. (3/16/92, Valdes) pkg$images/geometry/t_blkavg.x pkg$images/geometry/t_blkrep.x 1. Improved the precision of the blkavg task wcs updating code. 2. Changed the blkrep task wcs updating code so that it is consistent with blkavg. This means that a blkrep command followed by a blkavg command or vice versa will return the original coordinate system to within machine precision. (3/16/92, Davis) pkg$images/iminfo/listpixels.x Modified listpixels to print out an error if it could not open the wcs in the image. (3/15/92, Davis) pkg$images/geometry/t_magnify.x Fixed a bug in the magnify task wcs updating code which was not working correctly for dimensionally reduced images. (3/15/92, Davis) pkg$images/geometry/t_imtrans.x Fixed a bug in the imtranspose task wcs updating code which was not working correctly for dimensionally reduced images. (3/14/92, Davis) pkg$images/imarith/icalip.gx pkg$images/imarith/icclip.gx pkg$images/imarith/icslip.gx There was a bug allowing the number of valid pixels counter to become negative. Also there was a step which should not be done if the number of valid pixels is less than 1; i.e. all pixels rejected. A test was put in to skip this step. (3/13/92, Valdes) pkg$images/iminfo/t_imslice.x pkg$images/doc/imslice.hlp Added wcs support to the imslice task. (3/12/92, Davis) pkg$images/iminfo/t_imstat.x Fixed a bug in the code for computing the standard deviation, kurtosis, and skew, wherein precision was being lost because two of the intermediate variables in the computation were real instead of double precision. (3/10/92, Davis) pkg$images/iminfo/listpixels.x 1. Modified listpixels task to use the MWCS axis "format" attributes if they are present in the image header. 2. Added support for dimensionally reduced images, i.e. images which are sections of larger images and whose coordinate transformations depend on the reduced axes, to the listpixels task. (3/6/92, Davis) pkg$images/imarith/t_imcombine.x pkg$images/imarith/icsetout.x Changed error messages to say IMCOMBINE instead of ICOMBINE. (3/2/92, Valdes) pkg$images/imarith/iclog.x Added listing of read noise and gain. (2/10/92, Valdes) pkg$images/imarith/icscale.x pkg$images/imarith/icpclip.gx 1. Datatype declaration for asumi was incorrect. 2. Reduced the minimum number of images allowed for PCLIP to 3. (1/7/92, Valdes) pkg$images/imarith/icgrow.gx The first pixel to be checked was incorrectly set to 0 instead of 1 resulting in a segvio when using the grow option. (12/6/91, Valdes) pkg$images/imarith/icgdata.gx pkg$images/imarith/icscale.x Fixed datatype declaration errors found by SPPLINT. (11/22/91, Valdes) pkg$images/iminfo/t_imstat.x Fixed a bug in the kurtosis computation found by ST. (Davis 10/11/91) pkg$images/iminfo/t_imstat.x pkg$images/doc/imstat.hlp Corrected a bug in the mode computation in imstatistics. The parabolic interpolation correction for computing the histogram peak was being applied in the wrong direction. Note that for dev$pix the wrong answer is actually closer to the expected answer than the correct answer due to binning effects. (Davis 9/24/91) pkg$images/filters/t_gauss.x The code which computes the gaussian kernel was producing a divide by zero error if ratio=0.0 and bilinear=yes (2.10 version only). (Davis 9/18/91) pkg$images/doc/magnify.hlp Corrected a bug in the magnify help page. (Davis 9/18/91) pkg$images/imarith/icsclip.gx pkg$images/imarith/icaclip.gx pkg$images/imarith/iccclip.gx There was a typo, Memr[d[k]+k] --> Memr[d[j]+k]. (9/17/91, Valdes) pkg$images/imarith/icstat.gx pkg$images/imarith/icmask.x The offsets were used improperly in computing image statistics. (Valdes, 9/17/91) pkg$images/geometry/t_imshift.x The shifts file pointer was not being correctly initialized to NULL in the case where no shifts file was declared. When the task was invoked repeatedly from a script, this could result in an array being referenced, for which space had not been previously allocated. (Davis 7/29/91) pkg$images/imarith/imc* - pkg$images/imarith/ic* + pkg$images/imarith/t_imcombine.x pkg$images/imarith/mkpkg pkg$images/imarith/generic/mkpkg pkg$images/imcombine.par pkg$images/doc/imcombine.hlp Replaced old version of IMCOMBINE with new version supporting masks, offsets, and new algorithms. (Valdes 7/19/91) pkg$images/iminfo/imhistogram.x Imhistogram has been modified to print the value of the middle of histogram bin instead of the left edge if the output type is list instead of plot. (Davis 6/11/91) pkg$images/t_imsurfit.x Modified the sections file reading code to check the order of the x1 x2 y1 y2 parameters and switch (x1,x2) or (y1,y2) if x2 < x1 or y2 < y1 respectively. (Davis 5/28/91) pkg$images/listpixels.par pkg$images/iminfo/listpixels.x pkg$images/doc/listpixels.hlp Modified the listpixels task to be able to print the pixel coordinates in logical, physical or world coordinates. The default coordinate system is still logical as before. (Davis 5/17/91) pkg$images/images.par pkg$images/doc/minmax.hlp pkg$images/imutil/t_minmax.x pkg$images/imutil/minmax.x Minmax was modified to do the minimum and maximum values computations in double precision or complex instead of real if the input image pixel type is double precision or complex. Note that the minimum and maximum header values are still stored as real however. (Davis 5/16/91) imarith/t_imarith.x There was a missing statement to set the error flag if the image dimensions did not match. (5/14/91, Valdes) doc/imarith.hlp Fixed some formatting problems in the imarith help page. (5/2/91 Davis) imarith$imcombine.x Changed the order in which images are unmapped to have the output images closed last. This is to allow file descriptors for the temporary image used when updating STF headers. (4/22/91, Valdes) pkg$images/geometry/t_blkavg.x pkg$images/geometry/blkavg.gx pkg$images/geometry/blkavg.x The blkavg task was partially modified to support complex image data. The full modifications cannot be made because of an error in abavx.x and the missing routine absux.x. (4/18/91 Davis) pkg$images/geometry/geofit.x The x and y fits cross-terms switch was not being set correctly to "yes" in the case where xxorder=2 and xyorder=2 or in the case where yxorder=2 and yyorder=2. (4/9/91 Davis) pkg$images/geometry/geogmap.x Modified the line which prints the geometric parameters to use the variable name xshift and yshift instead of delx and dely. (4/9/91 Davis) pkg$images/imfit/imsurfit.x Fixed a bug in the pixel rejection code which occurred when upper was > 0.0 and lower = 0.0 or lower > 0 and upper = 0.0. The problem was that the code was simply setting the rejection limits to the computed sigma times the upper and lower parameters without checking for the 0.0 condition first. In the first case this results in all points with negative residuals being rejected and in the latter all points with positive residuals are rejected. (2/25/91 Davis) pkg$images/doc/hedit.hlp pkg$images/doc/hselect.hlp pkg$images/doc/imheader.hlp pkg$images/doc/imgets.hlp Added a reference to imgets in the SEE ALSO sections of the hedit and hselect tasks. Added a reference to hselect and hedit in the SEE ALSO sections of the imheader and imgets tasks. (2/22/91 Davis) pkg$images/gradient.hlp pkg$images/laplace.hlp pkg$images/gauss.hlp pkg$images/convolve.hlp pkg$images/gradient.par pkg$images/laplace.par pkg$images/gauss.par pkg$images/convolve.par pkg$images/t_gradient.x pkg$images/t_laplace.x pkg$images/t_gauss.x pkg$images/t_convolve.x pkg$images/convolve.x pkg$images/xyconvolve.x pkg$images/radcnv.x The convolution operators were modified to run more efficiently in certain cases. The LAPLACE task was modified to make use of the radial symmetry of the convolution kernel in the y direction as well as the x direction resulting in a modest speedup in execution time. A new parameter bilinear was added to the GAUSS and CONVOLVE tasks. By default and if appropriate mathematically, GAUSS now makes use of the bilinearity or separability of the Gaussian function, to separate the 2D convolution in x and y into two equivalent 1D convolutions in x and y, resulting in a considerable speedup in execution time. Similarly the user can know program CONVOLVE to compute a bilinear convolution instead of a full 2D 1 if appropriate. (1/29/91 Davis) pkg$images/filters/t_convolve.x CONVOLVE was not decoding the legal 1D kernel "1.0 2.0 1.0" correctly although the alternate form "1.0 2.0 1.0;" worked. Leading blanks in string kernels as in for example " 1.0 2.0 1.0" also generated and error. Fixed these bugs and added some additional error checking code. (11/28/90 Davis) pkg$images/doc/gauss.hlp Added a detailed mathematical description of the gaussian kernel used by the GAUSS task to the help page. pkg$images/images.hd pkg$images/rotate.cl pkg$images/imlintran.cl pkg$images/register.cl pkg$images/register.par Added src="script file name" entries to the IMAGES help database for the tasks ROTATE, IMLINTRAN, and REGISTER. Changed the CL script for REGISTER to a procedure script to remove the ugly local variable declarations. Added a few comments to the scripts. (12/11/90, Davis) pkg$images/iminfo/imhistogram.x Added a new parameter binwidth to imhistogram. If binwidth is defined it determines the histogram resolution in intensity units, otherwise nbins determines the resolution as before. (10/26/90, Davis) pkg$images/doc/sections.hlp Clarified what is meant by an image template and that the task itself does not check whether the specified names are actually images. The examples were improved. (10/3/90, Valdes) pkg$images/doc/fit1d.hlp Changed lines to columns in example 2. (10/3/90, Valdes) pkg$images/imarith/imcscales.x When an error occured while parsing the mode section the untrapped error caused further problems downstream. Because it would require adding lots of errchks to cause the program to gracefully abort I instead made it a warning. (10/2/90, Valdes) pkg$images/imutil/hedit.x Hedit was computing but not using min_lenarea. If the user specified a min_lenuserarea greater than the default of 28800 then the default was being used instead of the larger number. pkg$imarith/imasub.gx The case of subtracting an image from the constant zero had a bug which is now fixed. (8/14/90, Valdes) pkg$images/t_imtrans.x Modified the imtranspose task so it will work on type ushort images. (6/6/90 Davis) pkg$images Added world coordinate system support to the following tasks: imshift, shiftlines, magnify, imtranspose, blkrep, blkavg, rotate, imlintran, register and geotran. The only limitation is that register and geotran will only support simple linear transformations. (2/24/90 Davis) pkg$images/geometry/geotimtran.x Fixed a problem in the boundary extension "reflect" option code for small images which was causing odd values to be inserted at the edges of the image. (2/14/90 Davis) pkg$images/iminfo/imhistogram.x A new parameter "hist_type" was added to the imhistogram task giving the user the option of plotting the integral, first derivative and second derivative of the histogram as well as the normal histogram. Code was contributed by Rob Seaman. (2/2/90 Davis) pkg$images/geometry/geogmap.x The path name of the help file was being erroneously renamed with the result that when users ran the double precision version of the code they could not find the help file. (26/1/90 Davis) pkg$images/filters/t_boxcar.x,t_convolve.x Added some checks for 1-D images. (1/20/90 Davis) pkg$images/iminfo/t_imstat.x,imstat.h Made several minor bug fixes and alterations in the imstatistics task in response to user complaints and suggestions. 1. Changed the verbose parameter to the format parameter. If format is "yes" (the default) then the selected fields are printed in fixed format with column labels. Other wise the fields are printed in free format separated by 2 blanks. This fixes the problem of fields running together. 2. Fixed a bug in the code which estimates the median from the image histogram by linearly interpolating around the midpt of the integrated histogram. The bug occurred when more than half the pixels were in the first bin. 3. Added a check to ensure that the number of fields did not overflow the fields array. 4. Removed the extraneous blank line printed after the title. 5. The pound sign is now printed at the beginning of the column header string regardless of which field is printed first. In the previous versions it was only being printed if the image name field was printed first. 6. Changed the name of the median field to midpt in response to user confusions about how the median is computed. (1/20/90, Davis) pkg$images/imutil/t_imslice.hlp The imslice was not correctly computing the number of lines in the output image in the case where the slice dimension was 1. (12/4/89, Davis) pkg$images/doc/imcombine.hlp Clarified and documented definitions of the scale, offset, and weights. (11/30/89, Valdes) pkg$images/geometry/geotran.x High order surfaces of a certain functional form could occasionally produce out of bounds pixel errors. The bug was caused by not properly computing the distortion of the image boundary for higher order surfaces. (11/21/89, Davis) pkg$images/geometry/imshift.x The circulating buffer space was not being freed after each execution of IMSHIFT. This did not cause an error in execution but for a long list of frames could result in alot of memory being tied up. (10/25/89, Davis) pkg$images/imarith/t_imarith.x IMARITH is not prepared to deal with images sections in the output. It used to look for '[' to decide if the output specification included and image section. This has been changed to call the IMIO procedure imgsection and check if a non-null section string is returned. Thus it is up to IMIO to decide what part of the image name is an image section. (9/5/89, Valdes) pkg$images/imarith/imcmode.gx Fixed bug causing infinite loop when computing mode of constant value section. (8/14/89, Valdes) ==== V2.8 ==== pkg$images/iminfo/t_imstat.x Davis, Jun 15, 1989 Added a couple of switches to that skew and kurtosis are not computed if they are not to be printed. pkg$images/iminfo/t_imstat.x Davis, Jun 14, 1989 A simple mod was made to the skew and kurtosis computation to avoid divide by zero errors in case of underflow. pkg$images/imutil/chpixtype.par Davis, Jun 13, 1989 The parameter file has been modified to accept an output pixel type of ushort. pkg$images/imarith/imcombine.gx Valdes, Jun 2, 1989 A new scheme to detect file errors is now used. pkg$images/imfit/t_imsurfit.x Davis, Jun 1, 1989 1. If the user set regions = "sections" but the sections file did not exist the task would go into an infinite loop. The problem was a missing error check on the open statement. pkg$images/iminfo/imhistogram.x,imhistogram.par Davis, May 31, 1989 A new version of imhistogram has been installed. These mods have been made over a period of a month by Doug Tody and Rob Seaman. The mods include 1. An option to turn off log scaling of the y axis of the histogram plot. 2. A new autoscale parameter which avoids aliasing problems for integer data. 3. A new parameter top_close which resolves the ambiguity in the top bin of the histogram. pkg$images/imarith/imcombine.gx Valdes, May 9, 1989 Because a file descriptor was not reserved for string buffer operations and a call to stropen in cnvdate was not error checked the task would hang when more than 115 images were combined. Better error checking was added and now an error message is printed when the maximum number of images that can be combined is exceeded. pkg$images/imarith/t_imarith.x Valdes, May 6, 1989 Operations in which the output image has an image section are now skipped with a warning message. pkg$images/imarith/sigma.gx pkg$images/imarith/imcmode.gx Valdes, May 6, 1989 1. The weighted sigma was being computed incorrectly. 2. The argument declarations were wrong for integer input images. Namely the mean vector is always real. 3. Minor change to imcmode.gx to return correct datatype. pkg$images/imstack,imslice Davis, April 1, 1989 The proto images tasks imstack and imslice have been moved from the proto package to the images package. Imstack is unchanged except that it now supports the image data types USHORT and COMPLEX. Imslice has been modified to allow slicing along any dimension of the image instead of just the highest dimension. pkg$images/imstatistics. Davis, Mar 31, 1989 1. A totally new version of the imstatistics task has been written and replaces the old version. The new task allows the user to select which statistical parameters to compute and print. These include the mean, median, mode, standard deviation, skew, kurtosis and the minimum and maximum pixel values. pkg$images/imhistogram.par pkg$images/iminfo/imhistogram.x pkg$images/doc/imhistogram.hlp Davis, Mar 31, 1989 1. The imhistogram task has been modified to plot "box" style histograms as well as "line" type histograms. Type "line" remains the default. pkg$images/geometry/geotran.par,register.par,geomap.par pkg$images/doc/geomap.hlp,register.hlp,geotran.hlp Davis, Mar 6, 1989 1. Improved the parameter prompting in GEOMAP, REGISTER and GEOTRAN and improved the help pages. 2. Changed GEOMAP database quantities "xscale" and "yscale" to "xmag" and "ymag" for consistency . Geotran was changed appropriately. pkg$images/imarith/imcmode.gx For short data a short variable was wraping around when there were a significant number of saturated pixels leading to an infinite loop. The variables were made real regardless of the image datatype. (3/1/89, Valdes) pkg$images/imutil/imcopy.x Davis, Feb 28, 1989 1. Added support for type USHORT to the imcopy task. This is a merged ST modification. pkg$images/imarith/imcthreshold.gx pkg$images/imcombine.par pkg$images/doc/imcombine.hlp pkg$images/imarith/imcscales.x Valdes, Feb 16, 1989 1. Added provision for blank value when all pixels are rejected by the threshold. 2. Fixed a bug that was improperly scaling images in the threshold option. 3. The offset printed in the log now has the opposite sign so that it is the value "added" to bring images to a common level. pkg$images/imfit/imsurfit.x Davis, Feb 23, 1989 Fixed a bug in the median fitting code which could cause the porgram to go into an infinite loop if the region to be fitted was less than the size of the whole image. pkg$images/geometry/t_magnify.x Davis, Feb 16, 1989 Modified magnify to work on 1D images as well as 2D images. The documentation has been updated. pkg$images/geometry/t_geotran.x Davis, Feb 15, 1989 Modified the GEOTRAN and REGISTER tasks so that they can handle a list of transform records one for each input image. pkg$images/imarith/imcmode.gx Valdes, Feb 8, 1989 Added test for nx=1. pkg$images/imarith/t_imcombine.x Valdes, Feb 3, 1989 The test for the datatype of the output sigma image was wrong. pkg$images/iminfo/listpixels.x,listpixels.par Davis, Feb 6, 1989 The listpixels task has been modified to print out the pixels for a list of images instead of a single image only. A title line for each image listed can optionally be printed on the standard output if the new parameter verbose is set to yes. pkg$images/geometry/t_imshift.x Davis, Feb 2, 1989 Added a new parameter shifts_file to the imshift task. Shifts_file is the name of a text file containing the the x and yshifts for each input image to be shifted. The number of input shifts must equal the number of input images. pkg$images/geometry/t_geomap.x Davis, Jan 17, 1989 Added an error message for the case where the coordinates is empty of there are no points in the specified data range. Previously the task would proceed to the next coordinate file without any message. pkg$images/geometry/t_magnify.x Davis, Jan 14, 1989 Added the parameter flux conserve to the magnify task to bring it into line with all the other geometric transformation tasks. pgk$images/geometry/geotran.x,geotimtran.x Davis, Jan 2, 1989 A bug was fixed in the flux conserve code. If the x and y reference coordinates are not in pixel units and are not 1 then the computed flux per pixel was too small by xscale * yscale. pkg$images/filters/acnvrr.x,convolve.x,boxcar.x,aboxcar.x Davis, Dec 27, 1988 I changed the name of the acnvrr procedure to cnv_radcnvr to avoid a name conflict with a vops library procedure. This only showed up when shared libraries were implemented. I also changed the name of the aboxcarr procedure to cnv_aboxr to avoid conflict with the vops naming conventions. pkg$images/imarith/imcaverage.gx Davis, Dec 22, 1988 Added an errchk statement for imc_scales and imgnl$t to stop the program bombing with segmentation violations when mode <= 0. pkg$images/imarith/imcscales.x Valdes, Dec 8, 1988 1. IMCOMBINE now prints the scale as a multiplicative quantity. 2. The combined exposure time was not being scaled by the scaling factors resulting in a final exposure time inconsistent with the data. pkg$images/iminfo/imhistogram.x Davis, Nov 30, 1988 Changed the list+ mode so that bin value and count are printed out instead of bin count and value. This makes the plot and list modes compatable. pkg$images/iminfo/t_imstat.x Davis, Nov 17, 1988 Added the n=n+1 back into the inner loop of imstat. pkg$images/geotran.par,register.par Davis, Nov 11 , 1988 Fixed to glaring errors in the parameter files for register and geotran. Xscale and yscale were described as pixels per reference unit when they should be reference units per pixel. The appropriate bug fix has been made. pkg$images/geometry/t_geotran.x Davis, November 7, 1988 The routine gsrestore was not being error checked. If either of the input x or y coordinate surface was linear and the other was not, the message came back GSRESTORE: Illegal x coordinate. This bug has been fixed. pkg$images/imarith/imcombine.gx Valdes, October 19, 1988 A vops clear routine was not called generically causing a crash with double images. pkg$images/filters/t_fmedian.x,t_median.x,t_fmode.x,t_mode.x,t_gradient.x t_gauss.x,t_boxcar.x,t_convolve.x,t_laplace.x Davis, October 4, 1988 I fixed a bug in the error handling code for the filters tasks. If and error occurred during task execution and the input image name was the same as the output image name then the input image was trashed. pkg$images/imarith/imcscales.gx Valdes, September 28, 1988 It is now an error for the mode to be nonpositive when scaling or weighting. pkg$images/imarith/imcmedian.gx Valdes, August 16, 1988 The median option was selecting the n/2 value instead of (n+1)/2. Thus, for an odd number of images the wrong value was being determined for the median. pkg$images/geometry/t_imshift.x Davis, August 11, 1988 1. Imshift has been modified to uses the optimized code if nearest neighbour interpolation is requested. A nint is done on the shifts before calling the quick shift routine. 2. If the requested pixel shift is too large imshift will now clean up any pixelless header files before continuing execution. pkg$images/geometry/blkavg.gx Davis, July 13, 1988 Blkavg has been fixed so that it will work on 1D images. pkg$images/geometry/t_imtrans.x,imtrans.x Davis, July 12, 1988 Imtranspose has been modified to work on complex images. pkg$images/imutil/t_chpix.x Davis, June 29, 1988 A new task chpixtype has been added to the images package. Chpixtype changes the pixel types of a list of images to a specified output pixel type. Seven data types are supported "short", "ushort", "int", "long" "real" and "double". pkg$images/geometry/rotate.cl,imlintran.cl,t_geotran.x Davis, June 10, 1988 The rotate and imlintran scripts have been rewritten to use procedure scripts. This removes all the annoying temporary cl variables which appear when the user does an lpar. In previous versions of these two tasks the output was restricted to being the same size as the input image. This is still the default case, but the user can now set the ncols and nrows parameters to the desired output size. I ncols or nlines < 0 then then the task compute the output image size required to contain the whole input image. pkg$images/filters/t_convolve.x,t_laplace.x,t_gradient.x,t_gauss.x,convolve.x Davis, June 1, 1988 The convolution operators laplace, gauss and convolve have been modified to make use of radial symmetry in the convolution kernel. In gauss and laplace the change is transparent to the user. For the convolve operator the user must indicate that the kernel is radially symmetric by setting the parameter radsym. For kernels of 7 by 7 or greater the speedup in timings is on the order of 30% on the Vax 750 with the fpa. pkg$images/imarith/imcmode.gx Valdes, Apr 11, 1988 1. The use of a mode sections was handled incorrectly. pkg$images/imfit/fit1d.x Valdes, Jan 4, 1988 1. Added an error check for a failure in IMMAP. The missing error check caused FIT1D to hang when a bad input image was specified. pkg$images/magnify.par pkg$images/imcombine.par pkg$images/imarith/imcmode.gx pkg$images/doc/imarith.hlp Valdes, Dec 7, 1987 1. Added option list to parameter prompts. 2. Fixed minor typo in help page 3. The mode calculation in IMCOMBINE would go into an infinite loop if all the pixel values were the same. If all the pixels are the same them it skips searching for the mode and returns the constant number. pkg$images/geometry/geotimtran.x Davis, Nov 25, 1987 1. A bug in the boundary extension = wrap option was found in the IMLINTRAN task. The problem occured in computing values for out of bounds pixels in the range 0.0 < x < 1.0, ncols < x < ncols + 1.0, 0.0 < y < 1.0 and nlines < y < nlines + 1. The computed coordinates were falling outside the boundaries of the interpolation array. pkg$images/geometry/t_geomap.x,geograph.x Davis, Nov 19, 1987 1. The geomap task now writes the name of the output file into the database. 2. Rotation angles of 360. degrees have been altered to 0 degrees. pkg$images/imfit/t_imsurfit.x,imsurfit.x pkg$images/lib/ranges.x Davis, Nov 2, 1987 A bug in the regions fitting option of the IMSURFIT task has been found and fixed. This bug would occur when the user set the regions parameter to sections and then listed section which overlapped each other. The modified ranges package was not handling the overlap correctly and computing a number of points which was incorrect. pkg$images/imarith/* + Valdes, Sep 30, 1987 The directory was reorganized to put generic code in the subdirectory generic. A new task called IMCOMBINE has been added. It provides for combining images by a number of algorithms, statistically weighting the images when averaging, scaling or offsetting the images by the exposure time or image mode before combining, and rejecting deviant pixels. It is almost fully generic including complex images and works on images of any dimension. pkg$images/geometry/geotran.x Davis, Sept 3, 1987 A bug in the flux conserving algorithm was found in the geotran code. The symptom was that the flux of the output image occasionally was negative. This would happen when two conditions were met, the transformation was of higher order than a simple rotation, magnification, translation and an axis flip was involved. The mathematical interpretation of this bug is that the coordinate surface had turned upside down. The solution for people running systems with this bug is to multiply there images by -1. pkg$images/imfit/imsurfit.h,t_imsurfit.x Davis, Aug 6, 1987 A new option was added to the parameter regions in the imsurfit task. Imsurfit will now fit a surface to a single circular region defined by an x and y center and a radius. pkg$images/geometry/geotimtran.x Davis, Jun 15, 1987 Geotran and register were failing when the output image number of rows and columns was different from the input number of rows and columns. Geotran was mistakenly using the input images sizes to determine the number of output lines that should be produced. The same problem occurred when the values of the boundary pixels were being computed. The program was using the output image dimensions to compute the boundary pixels instead of the input image dimensions. pkg$images/geometry/geofit.x,geogmap.x Davis, Jun 11, 1987 A bug in the error checking code in the geomap task was fixed. The condition of too few points for a reasonable was not being trapped correctly. The appropriate errchk statements were added. pkg$images/geomap.par Davis, Jun 10, 1987 The default fitting function was changed to polynomial. This will satisfy most users who wish to do shifts, rotations, and magnifications and avoid the neccessity of correctly setting the xmin, xmax, ymin, and ymax parameters. For the chebyshev and legendre polynomial functions these parameters must be explicitly set. For reference coordinates in pixel units the normal settings are 1, ncols, 1 and nlines respectively. pkg$images/iminfo/hselect.x,imheader.x,images$/imutil/hselect.x Davis, Jun 8, 1987 Imheader has been modified to open an image with the default min_lenuserarea Hselect and hedit will now open the image setting the user area to the maximum of 28800 chars or the min_lenuser environment variable. pkg$images/iminfo/t_imstat.x Davis, May 22, 1987 An error in the image minimum computation was corrected. This error would show up most noiticeably if imstat was run on a 1 pixel image. The min value would be left set to MAX_REAL. pkg$images/filters/mkpkg Davis, May 22, 1987 I added mach.h to the dependency file list of t_fmedian.x and recompiled. The segmentation violations I had been getting in the program disappeared. pkg$images/t_shiftlines.x,shiftlines.x Davis, April 15, 1987 1. I changed the names of the procedures shiftlines and shiftlinesi to sh_lines and sh_linesi. When the original names were contracted to 6 letter fortran names they became shifti and shifts which just so happens to collide with shifti and shifts in the subdirectory osb. On VMS this was causing problems with the shareable libraries. If images was linked with -z there was no problem. pkg$images/imarith/t_imsum.x Valdes, March 24, 1987 1. IMSUM was failing to unmap images opened to check image dimensions in a quick first pass through the image list. This is probably the source of the out of files problem with STF images. It may be the source of the out of memory problem reported from AOS/IRAF. pkg$images/imfit/fit1d.x pkg$images/imfit/mkpkg Valdes, March 17, 1987 1. Added error checking for the illegal operation in which both input and output image had an image section. This was causing the task to crash. The task now behaves properly in this circumstance and even allows the fitted output to be placed in an image section of an existing output image (even different than the input image section) provided the input and output images have the same sizes. pkg$images/t_convolve.x Davis, March 3, 1987 1. Fixed the kernel decoding routine in the convolve task so that it now recognizes the row delimter character in string entry mode. pkg$images/geometry,filters Davis, February 27, 1987 1. Changed all the imseti (im, TY_BNDRYPIXVAL, value) calls to imsetr. pkg$images/t_minmax.x,minmax.x Davis, February 24, 1987 1. Minmax has been changed to compute the minimum and maximum pixel as well as the minimum and maximum pixel values. The pixels are output in section notation and stored in the minmax parameter file. pkg$images/t_magnify.x Davis, February 19, 1987 1. Magnify was aborting with the error MSIFIT: Too few datapoints when trying to reduce an image using the higher order interpolants poly3, poly5 and spline3. I increased the NEDGE defined constant from 2 to three and modified the code to use the out of bounds imio. pkg$images/geograph.x,geogmap.x Davis, February 17, 1987 1. Geomap now uses the gpagefile routine to page the .keys file. The :show command deactivates the workstation before printing a block of text and reactivates it when it is finished. pkg$images/geometry/geomap,geotran Davis, January 26, 1987 1. There have been substantial changes to the geomap, and geotrans tasks and those tasks rotate, imlintran and register which depend on them. 2. Geomap has been changed to be able to compute a transformation in both single and double precision. 3. The geotran code has been speeded up considerably. A simple rotate now takes 70 seconds instead of 155 seconds using bilinear interpolation. 4. Two new cl parameters nxblock and nyblock have been added to the rotate, imlintran, register and geotran tasks. If the output image is smaller than these parameters then the entire output image is computed at once. Otherwise the output image is computed in blocks nxblock by nyblock in size. 5. The 3 geotran parameters rotation, scangle and flip have been replaced with two parameters xrotation and yrotation which serve the same purpose. pkg$images/geometry/t_shiftlines.x,shiftlines.x Davis, January 19, 1987 1. The shiftlines task has been completely rewritten. The following are the major changes. 2. Shiftlines now makes use of the imio boundary extension operations. Therefore the four options: nearest pixel, reflect, wrap and constant boundary extension are available. 3. The interpolation code has been vectorised. The previous version was using the function call asieval for every output pixel evaluated. The asieval call were replaced with asivector calls. 4. An extra CL parameter constant to support constant boundary exension was added. 5. The shiftlines help page was modified and the date changed to January 1987. pkg$images/imfit/imsurfit.x Davis, January 12, 1987 1. I changed the amedr call to asokr calls. For my application it did not matter whether the input array is left partially sorted and the asokr routine is more efficient. pkg$images/lib/pixlist.x Davis, December 12, 1986 1. A bug in the pl_get_ranges routine caused the routine to fail when the number of ranges got too large. The program could not detect the end of the ranges and would go into an infinite loop. pkg$images/iminfo/t_imstat.x Davis, December 3, 1986 1. Imstat was failing on constant images because finite machine precision could result in a negative sigma squared. Added a check for this condition. pkg$images/filters/fmode.x Davis, October 27, 1986 1. Added a check for 0 data range before calling amapr. pkg$images/imarith/imsum.gx Valdes, October 20, 1986 1. Found and fixed bug in this routine which caused pixel rejection to fail some fraction of the time. pkg$images/geometry/blkrp.gx Valdes, October 13, 1986 1. There was a bug when the replication factor for axis 1 was 1. pkg$images/iminfo/imhistogram.x Hammond, October 8, 1986 1. Running imhistogram on a constant valued image would result in a "floating divide by zero fault" in ahgm. This condition is now trapped and a warning printed if there is no range in the data. pkg$images/tv/doc/cvl.hlp Valdes, October 7, 1986 1. Typo in V2.3 documentation fixed: "zcale" -> "zscale". pkg$images/fit1d.par Valdes, October 7, 1986 1. When querying for the output type the query was: Type of output (fit, difference, ratio) (fit|difference|ratio) (): The enumerated values were removed since they are given in the prompt string. pkg$images/imarith/t_imsum.x pkg$images/imarith/imsum.gx pkg$images/do/imsum.hlp Valdes, October 7, 1986 1. Medians or pixel rejection with more than 15 images is now correct. There was an error in buffering. 2. Averages of integer datatype images are now correct. The error was caused by summing the pixel values divided by the number of images instead of summing the pixel values and then dividing by the number of images. 3. Option keywords may now be abbreviated. 4. The output pixel datatype now defaults to the calculation datatype as is done in IMARITH. The help page was modified to indicate this. 5. Dynamic memory is now used throughout to reduce the size of the executable. 6. The bugs 1-2 are present in V2.3 and not in V2.2. pkg$images/imarith/t_imarith.x pkg$images/imarith.par pkg$images/doc/imarith.hlp Valdes, October 6, 1986 1. The parameter "debug" was changed to "noact". "debug" is reserved for debugging information. 2. The output pixel type now defaults to the calculation datatype. 3. The datatype of constant operands is determined with LEXNUM. This fixes a bug in which a constant such as "1." was classified as an integer. 4. Trailing whitespace in the string for a constant operand is allowed. This fixes a bug with using "@" files created with the task FIELDS from a table of numbers. Trailing whitespace in image names is not checked for since this should be taken care of by lower level system services. 5. The reported bug with the "max" operation not creating a pixel file was the result of the previous round of changes. This has been corrected. This problem does not exist in the released version. 6. All strings are now dynamically allocated. Also IMTOPENP is used to open a CL list directly. 7. The help page was revised for points (1) and (2). pkg$images/fmode.par pkg$images/fmd_buf.x pkg$images/med_sort.x Davis, September 29, 1986 1. Changed the default value of the unmap parameter in fmode to yes. The documentation was changed and the date modified. 2. Added a test to make sure that the input image was not a constant image in fmode and fmedian. 3. Fixed the recently added swap macro in the sort routines which was giving erroneous results for small boxes in tasks median and mode. pkg$images/imfit/fit1d.x Valdes, September 24, 1986 1. Changed subroutine name with a VOPS prefix to one with a FIT1D prefix. pkg$images/imarith/t_imdivide.x pkg$images/doc/imdivide.hlp pkg$images/imdivide.par Valdes, September 24, 1986 1. Modified this ancient and obsolete task to remove redundant subroutines now available in the VOPS library. 2. The option to select action on zero divide was removed since there was only one option. Parameter file changed. 3. Help page revised. pkg$images/geometry/t_blkrep.x + pkg$images/geometry/blkrp.gx + pkg$images/geometry/blkrep.x + pkg$images/doc/blkrep.hlp + pkg$images/doc/mkpkg pkg$images/images.cl pkg$images/images.men pkg$images/images.hd pkg$images/x_images.x Valdes, September 24, 1986 1. A new task called BLKREP for block replicating images has been added. This task is a complement to BLKAVG and performs a function not available in any other way. 2. Help for BLKREP has been added. pkg$images/imarith/t_imarith.x pkg$images/imarith/imadiv.gx pkg$images/doc/imarith.hlp pkg$images/imarith.par Valdes, September 24, 1986 1. IMARITH has been modified to provide replacement of divisions by zero with a constant parameter value. 2. The documentation has been revised to include this change and to clarify and emphasize areas of possible confusion. pkg$images/doc/magnify.hlp pkg$images/doc/blkavg.hlp Valdes, September 18, 1986 1. The MAGNIFY help document was expanded to clarify that images with axis lengths of 1 cannot be magnified. Also a discussion of the output size of a magnified image. This has been misunderstood often. 2. Minor typo fix for BLKAVG. images$geometry/blkav.gx: Davis, September 7, 1986 1. The routine blkav$t was declared a function but called everywhere as a procedure. Removed the function declaration. images$filters/med_sort.x: Davis, August 14, 1986 1. A bug in the sorting routine for MEDIAN and MODE in which the doop loop increment was being set to zero has been fixed. This bug was causing MEDIAN and MODE to fail on class 6 for certain sized windows. images$imfit/fit1d.x: Davis, July 24, 1986 1. A bug in the type=ratio option of fit1d was fixed. The iferr call on the vector operator adivr was not trapping a divide by zero condition. Changed adivr to adivzr. images$iminfo/listpixels.x: Davis, July 21, 1986 1. I changed a pargl to pargi for writing out the column number of the pixels. images$iminfo/t_imstat.x: Davis, July 21, 1986 1. I changed a pargr to a pargd for the double precision quantitiies sum(MIN) and sum(MAX). images$imfit/t_lineclean.x: Davis, July 14, 1986 1. Bug in the calling sequence for ic_clean fixed. The ic pointer was not being passed to ic_clean causing access violation and/or segmentation violation errors. images$imfit/fit1d.x, lineclean.x: Valdes, July 3, 1986 1. FIT1D and LINECLEAN modified to use new ICFIT package. From Valdes June 19, 1986 1. The help page for IMSUM was modified to explicitly state what the median of an even number of images does. ----------------------------------------------------------------------------- From Davis June 13, 1986 1. A bug in CONVOLVE in which insufficient space was being allocated for long (> 161 elements) 1D kernels has been fixed. CONVOLVE was not allocating sufficent extra space. ----------------------------------------------------------------------------- From Davis June 12, 1986 1. I have changed the default value of parameter unmap in task FMEDIAN to yes to preserve the original data range. 2. I have changed the value of parameter row_delimiter from \n to ;. ----------------------------------------------------------------------------- From Davis May 12, 1986 1. Changed the angle convention in GAUSS so that theta is the angle of the major axis with respect to the x axis measured counter-clockwise as specified in the help page instead of the negative of that angle. ----------------------------------------------------------------------------- From Davis Apr 28, 1986 1. Moved geomap.key to lib$scr and made redefined HELPFILE in geogmap.x appropriately. ------------------------------------------------------------------------------ images$imarith/imsum.gx: Valdes Apr 25, 1986 1. Fixed bug in generic code which called the real VOPS operator regardless of the datatype. This caused IMSUM to fail on short images. From Davis Apr 17, 1986 1. Changed constructs of the form boolean == false in the file imdelete.x to ! boolean. ------------------------------------------------------------------------------ images$imarith: Valdes, April 8, 1986 1. IMARITH has been modified to also operate on a list of specified header parameters. This is primarily used when adding images to also added the exposure times. A new parameter was added and the help page modified. 2. IMSUM has been modified to also operate on a list of specified header parameters. This is primarily used when summing images to also sum the exposure times. A new parameter was added and the help page modified. ------------------------------------------------------------------------------ From Valdes Mar 24, 1986: 1. When modifying IMARITH to handle mixed dimensions the output image header was made a copy of the image with the higher dimension. However, the default when the images were of the same dimension changed to be a copy of the second operand. This has been changed back to being a copy of the first operand image. ------------------------------------------------------------------------------ From Davis Mar 21, 1986: 1. A NULL pointer bug in the subroutine plfree inside IMSURFIT was causing segmentation violation errors. A null pointer test was added to plfree. ------------------------------------------------------------------------------ From Davis Mar 20, 1986: 1. A bug involving in place operations in several image tasks has been fixed. ------------------------------------------------------------------------------ From Davis Mar 19, 1986: 1. IMSURFIT no longer permits the input image to be replaced by the output image. 2. The tasks IMSHIFT, IMTRANSPOSE, SHIFTLINES, and GEOTRAN have been modified to use the images tools xt_mkimtemp and xt_delimtemp for in place calculations. ------------------------------------------------------------------------------- From Valdes Mar 13, 1986: 1. Bug dealing with type coercion in short datatype images in IMARITH and IMSUM which occurs on the SUN has been fixed. ------ From Valdes Mar 10, 1986: 1. IMSUM has been modified to work on any number of images. 2. Modified the help page ------ From Valdes Feb 25, 1986: There have been two changes to IMARITH: 1. A bug preventing use of image sections has been removed. 2. An improvement allowing use of images of different dimension. The algorithm is as follow: a. Check if both operands are images. If not the output image is a copy of the operand image. b. Check that the axes lengths are the same for the dimensions in common. For example a 3D and 2D image must have the same number of columns and lines. c. Set the output image to be a copy of the image with the higher dimension. d. Repeat the operation over the lower dimensions for each of the higher dimensions. For example, consider subtracting a 2D image from a 3D image. The output image will be 3D and the 2D image is subtracted from each band of the 3D image. This will work for any combination of dimensions. Another example is dividing a 3D image by a 1D image. Then each line of each plane and each band will be divided by the 1D image. Likely applications will be subtracting biases and darks and dividing by response calibrations in stacked observations. 3. Modified the help page =========== Release 2.2 =========== From Davis Mar 6, 1986: 1. A serious bug had crept into GAUSS after I made some changes. For 2D images the sense of the sigma was reversed, i.e sigma = 2.0 was actually sigma = 0.5. This bug has now been fixed. --------------------------------------------------------------------------- From Davis Jan 13, 1986: 1. Listpixels will now print out complex pixel values correctly. --------------------------------------------------------------------------- From Davis Dec 12, 1985: 1. The directional gradient operator has been added to the images package. --------------------------------------------------------------------------- From Valdes Dec 11, 1985: 1. IMARITH has been modified to first check if an operand is an existing file. This allows purely numeric image names to be used. --------------------------------------------------------------------------- From Davis Dec 11, 1985: 1. A Laplacian (second derivatives) operator has been added to the images package. --------------------------------------------------------------------------- From Davis Dec 10, 1985: 1. The new convolution tasks boxcar, gauss and convolve have been added to the images package. Convolve convolves an image with an arbitrary user supplied rectangular kernel. Gauss convolves an image with a 2D Gaussian of arbitrary size. Boxcar will smooth an image using a smoothing window of arbitrary size. 2. The images package source code has been reorganized into the following subdirectories: 1) filters 2) geometry 3) imfit 4) imarith 4) iminfo and 5) imutil 6) lib. Lib contains routines which may be of use to several IRAF tasks such as ranges. The imutil subdirectory contains tasks which modify images in some way such as hedit. The iminfo subdirectory contains code for displaying header and pixel values and other image characteristics such as the histogram. Image arithmetic and fitting routines are found in imarith and imfit respectively. Filters contains the convolution and median filtering routines and geometry contains the geometric distortion corrections routines. 3. The documentation of the main images package has been brought into conformity with the new IRAF standards. 4. Documentation for imdelete, imheader, imhistogram, listpixels and sections has been added to the help database. 5. The parameter structure for imhistogram has been simplified. The redundant parameters sections and setranges have been removed. --------------------------------------------------------------------------- From Valdes Nov 4, 1985: 1. IMCOPY modified so that the output image may be a directory. Previously logical directories were not correctly identified. ------ From Davis Oct 21, 1985: 1. A bug in the pixel rejection cycle of IMSURFIT was corrected. The routine make_ranges in ranges.x was not successfully converting a sorted list of rejected pixels into a list of ranges in all cases. 2. Automatic zero divide error checking has been added to IMSURFIT. ------ From Valdes Oct 17, 1985: 1. Fit1d now allows averaging of image lines or columns when interactively setting the fitting parameters. The syntax is "Fit line = 10 30"; i.e. blank separated line or column numbers. A single number selects just one line or column. Be aware however, that the actual fitting of the image is still done on each column or line individually. 2. The zero line in the interactive curve fitting graphs has been removed. This zero line interfered with fitting data near zero. ------ From Rooke Oct 10, 1985: 1. Blkaverage was changed to "blkavg" and modified to support any allowed number of dimensions. It was also made faster in most cases, depending on the blocking factors in each dimension. ------ From Valdes Oct 4, 1985: 1. Fit1d and lineclean modified to allow separate low and high rejection limits and rejection iterations. ------ From Davis Oct 3, 1985: 1. Minmax was not calculating the minimum correctly for integer images. because the initial values were not being set correctly. ------ From Valdes Oct 1, 1985: 1. Imheader was modified to print the image history. Though the history mechanism is little used at the moment it should become an important part of any image. 2. Task revisions renamed to revs. ------ From Davis Sept 30, 1985: 1. Two new tasks median and fmedian have been added to the images package. Fmedian is a fast median filtering algorithm for integer data which uses the histogram of the image to calculate the median at each window. Median is a slower but more general algorithm which performs the same task. ------ From Valdes August 26, 1985: 1. Blkaverage has been modified to include an new parameter called option. The current options are to average the blocks or sum the blocks. ------ From Valdes August 7, 1985 1. Fit1d and lineclean wer recompiled with the modified icfit package. The new package contains better labeling and graph documentation. 2. The two tasks now have parameters for setting the graphics device and reading cursor input from a file. ______ From: /u2/davis/ Tue 08:27:09 06-Aug-85 Package: images Title: imshift bug Imshift was shifting incorrectly when an integral pixel shift in x and a fractional pixel shift in y was requested. The actual x shift was xshift + 1. The bug has been fixed and imshift will now work correctly for any combination of fractional and integral pixel shifts ------ From: /u2/davis/ Fri 18:14:12 02-Aug-85 Package: images Title: new images task A new task GEOMAP has been added to the images package. GEOMAP calculates the spatial transformation required to map one image onto another. ------ From: /u2/davis/ Thu 16:47:49 01-Aug-85 Package: images Title: new images tasks The tasks ROTATE, IMLINTRAN and GEODISTRAN have been added to the images package. ROTATE rotates and shifts an image. IMLINTRAN will rotate, rescale and shift an an image. GEODISTRAN corrects an image for geometric distortion. ------ From Valdes July 26, 1985: 1. The task revisions has been added to page revisions to the images package. The intent is that each package will have a revisions task. Note that this means there may be multiple tasks named revisions loaded at one time. Typing revisions alone will give the revisions for the current package. To get the system revisions type system.revisions. 2. A new task called fit1d replaces linefit. It is essentially the same as linefit except for an extra parameter "axis" which selects the axis along which the functions are to be fit. Axis 1 is lines and axis 2 is columns. The advantages of this change are: a. Column fitting can now be done without transposing the image. This allows linefit to be used with image sections along both axes. b. For 1D images there is no prompt for the line number. .endhelp