Regenerated autotools with something less bleeding edge than Fedora 14's implementation.ncurses

It was only causing problems.

10 files changed, 2130 insertions, 2278 deletions

diff --git a/.gitignore b/.gitignore
index 8c460fe..999ac6f 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1 +1 @@
-*.anjuta*
+*.anjuta*
\ No newline at end of file
diff --git a/INSTALL b/INSTALL
index e69de29..7d1c323 100644
--- a/INSTALL
+++ b/INSTALL
@@ -0,0 +1,365 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+
+   Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+   Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.  Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below.  The lack of an optional feature in a given package is not
+necessarily a bug.  More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+   The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.
+
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package, generally using the just-built uninstalled binaries.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.  When installing into a prefix owned by root, it is
+     recommended that the package be configured and built as a regular
+     user, and only the `make install' phase executed with root
+     privileges.
+
+  5. Optionally, type `make installcheck' to repeat any self-tests, but
+     this time using the binaries in their final installed location.
+     This target does not install anything.  Running this target as a
+     regular user, particularly if the prior `make install' required
+     root privileges, verifies that the installation completed
+     correctly.
+
+  6. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+  7. Often, you can also type `make uninstall' to remove the installed
+     files again.  In practice, not all packages have tested that
+     uninstallation works correctly, even though it is required by the
+     GNU Coding Standards.
+
+  8. Some packages, particularly those that use Automake, provide `make
+     distcheck', which can by used by developers to test that all other
+     targets like `make install' and `make uninstall' work correctly.
+     This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you can use GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.  This
+is known as a "VPATH" build.
+
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+   On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor.  Like
+this:
+
+     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CPP="gcc -E" CXXCPP="g++ -E"
+
+   This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+   By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.  In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+   The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+   The first method involves providing an override variable for each
+affected directory.  For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'.  Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated.  The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+   The second method involves providing the `DESTDIR' variable.  For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names.  The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters.  On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+   Some packages offer the ability to configure how verbose the
+execution of `make' will be.  For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
+a workaround.  If GNU CC is not installed, it is therefore recommended
+to try
+
+     ./configure CC="cc"
+
+and if that doesn't work, try
+
+     ./configure CC="cc -nodtk"
+
+   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+   On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'.  It is recommended to use the following options:
+
+     ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS
+     KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+   Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
+
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+     Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+     Print a summary of the options unique to this package's
+     `configure', and exit.  The `short' variant lists options used
+     only in the top level, while the `recursive' variant lists options
+     also present in any nested packages.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+     Use DIR as the installation prefix.  *note Installation Names::
+     for more details, including other options available for fine-tuning
+     the installation locations.
+
+`--no-create'
+`-n'
+     Run the configure checks, but stop before creating any output
+     files.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+
diff --git a/Makefile.in b/Makefile.in
index fd33a4e..3ab4180 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -198,6 +198,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
diff --git a/aclocal.m4 b/aclocal.m4
index 17494f8..8b26ce0 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -13,8 +13,8 @@
 
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.66],,
-[m4_warning([this file was generated for autoconf 2.66.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],,
+[m4_warning([this file was generated for autoconf 2.67.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically `autoreconf'.])])
@@ -22,8 +22,7 @@ To do so, use the procedure documented by the package, typically `autoreconf'.])
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 #
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-#                 Inc.
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 # This file is free software; the Free Software Foundation gives
@@ -32,8 +31,7 @@ To do so, use the procedure documented by the package, typically `autoreconf'.])
 
 m4_define([_LT_COPYING], [dnl
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-#                 Inc.
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 #   This file is part of GNU Libtool.
@@ -60,7 +58,7 @@ m4_define([_LT_COPYING], [dnl
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 ])
 
-# serial 57 LT_INIT
+# serial 56 LT_INIT
 
 
 # LT_PREREQ(VERSION)
@@ -89,7 +87,6 @@ esac
 # ------------------
 AC_DEFUN([LT_INIT],
 [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
-AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
 AC_BEFORE([$0], [LT_LANG])dnl
 AC_BEFORE([$0], [LT_OUTPUT])dnl
 AC_BEFORE([$0], [LTDL_INIT])dnl
@@ -106,8 +103,6 @@ AC_REQUIRE([LTVERSION_VERSION])dnl
 AC_REQUIRE([LTOBSOLETE_VERSION])dnl
 m4_require([_LT_PROG_LTMAIN])dnl
 
-_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
-
 dnl Parse OPTIONS
 _LT_SET_OPTIONS([$0], [$1])
 
@@ -144,7 +139,7 @@ m4_defun([_LT_CC_BASENAME],
     *) break;;
   esac
 done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 ])
 
 
@@ -164,9 +159,6 @@ m4_defun([_LT_FILEUTILS_DEFAULTS],
 m4_defun([_LT_SETUP],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
-AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
-
 _LT_DECL([], [host_alias], [0], [The host system])dnl
 _LT_DECL([], [host], [0])dnl
 _LT_DECL([], [host_os], [0])dnl
@@ -208,6 +200,7 @@ fi
 _LT_CHECK_OBJDIR
 
 m4_require([_LT_TAG_COMPILER])dnl
+_LT_PROG_ECHO_BACKSLASH
 
 case $host_os in
 aix3*)
@@ -221,6 +214,23 @@ aix3*)
   ;;
 esac
 
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
 # Global variables:
 ofile=libtool
 can_build_shared=yes
@@ -261,28 +271,6 @@ _LT_CONFIG_COMMANDS
 ])# _LT_SETUP
 
 
-# _LT_PREPARE_SED_QUOTE_VARS
-# --------------------------
-# Define a few sed substitution that help us do robust quoting.
-m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
-[# Backslashify metacharacters that are still active within
-# double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-])
-
 # _LT_PROG_LTMAIN
 # ---------------
 # Note that this code is called both from `configure', and `config.status'
@@ -435,7 +423,7 @@ m4_define([_lt_decl_all_varnames],
 # declaration there will have the same value as in `configure'.  VARNAME
 # must have a single quote delimited value for this to work.
 m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
 
 
 # _LT_CONFIG_STATUS_DECLARATIONS
@@ -445,7 +433,7 @@ m4_define([_LT_CONFIG_STATUS_DECLARE],
 # embedded single quotes properly.  In configure, this macro expands
 # each variable declared with _LT_DECL (and _LT_TAGDECL) into:
 #
-#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
 m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
 [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
     [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
@@ -544,20 +532,12 @@ LTCC='$LTCC'
 LTCFLAGS='$LTCFLAGS'
 compiler='$compiler_DEFAULT'
 
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$[]1
-_LTECHO_EOF'
-}
-
 # Quote evaled strings.
 for var in lt_decl_all_varnames([[ \
 ]], lt_decl_quote_varnames); do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
     *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -568,9 +548,9 @@ done
 # Double-quote double-evaled strings.
 for var in lt_decl_all_varnames([[ \
 ]], lt_decl_dquote_varnames); do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
     *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -578,38 +558,16 @@ for var in lt_decl_all_varnames([[ \
     esac
 done
 
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\[$]0 --fallback-echo"')dnl "
+  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+  ;;
+esac
+
 _LT_OUTPUT_LIBTOOL_INIT
 ])
 
-# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
-# ------------------------------------
-# Generate a child script FILE with all initialization necessary to
-# reuse the environment learned by the parent script, and make the
-# file executable.  If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins.  After this
-# macro, additional text can be appended to FILE to form the body of
-# the child script.  The macro ends with non-zero status if the
-# file could not be fully written (such as if the disk is full).
-m4_ifdef([AS_INIT_GENERATED],
-[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
-[m4_defun([_LT_GENERATED_FILE_INIT],
-[m4_require([AS_PREPARE])]dnl
-[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
-[lt_write_fail=0
-cat >$1 <<_ASEOF || lt_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-$2
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$1 <<\_ASEOF || lt_write_fail=1
-AS_SHELL_SANITIZE
-_AS_PREPARE
-exec AS_MESSAGE_FD>&1
-_ASEOF
-test $lt_write_fail = 0 && chmod +x $1[]dnl
-m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
 
 # LT_OUTPUT
 # ---------
@@ -619,11 +577,20 @@ m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
 AC_DEFUN([LT_OUTPUT],
 [: ${CONFIG_LT=./config.lt}
 AC_MSG_NOTICE([creating $CONFIG_LT])
-_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
-[# Run this file to recreate a libtool stub with the current configuration.])
+cat >"$CONFIG_LT" <<_LTEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate a libtool stub with the current configuration.
 
-cat >>"$CONFIG_LT" <<\_LTEOF
 lt_cl_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AS_SHELL_SANITIZE
+_AS_PREPARE
+
+exec AS_MESSAGE_FD>&1
 exec AS_MESSAGE_LOG_FD>>config.log
 {
   echo
@@ -649,7 +616,7 @@ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
 m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
 configured by $[0], generated by m4_PACKAGE_STRING.
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2008 Free Software Foundation, Inc.
 This config.lt script is free software; the Free Software Foundation
 gives unlimited permision to copy, distribute and modify it."
 
@@ -694,13 +661,15 @@ chmod +x "$CONFIG_LT"
 # appending to config.log, which fails on DOS, as config.log is still kept
 # open by configure.  Here we exec the FD to /dev/null, effectively closing
 # config.log, so it can be properly (re)opened and appended to by config.lt.
-lt_cl_success=:
-test "$silent" = yes &&
-  lt_config_lt_args="$lt_config_lt_args --quiet"
-exec AS_MESSAGE_LOG_FD>/dev/null
-$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-exec AS_MESSAGE_LOG_FD>>config.log
-$lt_cl_success || AS_EXIT(1)
+if test "$no_create" != yes; then
+  lt_cl_success=:
+  test "$silent" = yes &&
+    lt_config_lt_args="$lt_config_lt_args --quiet"
+  exec AS_MESSAGE_LOG_FD>/dev/null
+  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+  exec AS_MESSAGE_LOG_FD>>config.log
+  $lt_cl_success || AS_EXIT(1)
+fi
 ])# LT_OUTPUT
 
 
@@ -877,13 +846,11 @@ AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
 AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
 AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
 AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
-AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
 dnl AC_DEFUN([AC_LIBTOOL_F77], [])
 dnl AC_DEFUN([AC_LIBTOOL_FC], [])
 dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
-dnl AC_DEFUN([AC_LIBTOOL_RC], [])
 
 
 # _LT_TAG_COMPILER
@@ -988,31 +955,6 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
 	[lt_cv_ld_exported_symbols_list=no])
 	LDFLAGS="$save_LDFLAGS"
     ])
-    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
-      [lt_cv_ld_force_load=no
-      cat > conftest.c << _LT_EOF
-int forced_loaded() { return 2;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
-      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
-      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
-      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
-      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
-      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
-      cat > conftest.c << _LT_EOF
-int main() { return 0;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
-      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
-      _lt_result=$?
-      if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
-	lt_cv_ld_force_load=yes
-      else
-	cat conftest.err >&AS_MESSAGE_LOG_FD
-      fi
-        rm -f conftest.err libconftest.a conftest conftest.c
-        rm -rf conftest.dSYM
-    ])
     case $host_os in
     rhapsody* | darwin1.[[012]])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
@@ -1040,7 +982,7 @@ _LT_EOF
     else
       _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
     fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+    if test "$DSYMUTIL" != ":"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -1060,11 +1002,7 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
   _LT_TAGVAR(hardcode_direct, $1)=no
   _LT_TAGVAR(hardcode_automatic, $1)=yes
   _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
-  else
-    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
-  fi
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
   _LT_TAGVAR(link_all_deplibs, $1)=yes
   _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
   case $cc_basename in
@@ -1072,7 +1010,7 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
      *) _lt_dar_can_shared=$GCC ;;
   esac
   if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=func_echo_all
+    output_verbose_link_cmd=echo
     _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
     _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
     _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -1118,65 +1056,170 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 # _LT_SHELL_INIT(ARG)
 # -------------------
 m4_define([_LT_SHELL_INIT],
-[m4_divert_text([M4SH-INIT], [$1
-])])# _LT_SHELL_INIT
-
+[ifdef([AC_DIVERSION_NOTICE],
+	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+	 [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_SHELL_INIT
 
 
 # _LT_PROG_ECHO_BACKSLASH
 # -----------------------
-# Find how we can fake an echo command that does not interpret backslash.
-# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
 m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-
-AC_MSG_CHECKING([how to print strings])
-# Test print first, because it will be a builtin if present.
-if test "X`print -r -- -n 2>/dev/null`" = X-n && \
-   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='print -r --'
-elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='printf %s\n'
+[_LT_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$lt_ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ;;
+esac
+
+ECHO=${lt_ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X[$]1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
+  :
 else
-  # Use this function as a fallback that always works.
-  func_fallback_echo ()
-  {
-    eval 'cat <<_LTECHO_EOF
-$[]1
-_LTECHO_EOF'
-  }
-  ECHO='func_fallback_echo'
+  # Restart under the correct shell.
+  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
 fi
 
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO "$*" 
-}
+if test "X[$]1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<_LT_EOF
+[$]*
+_LT_EOF
+  exit 0
+fi
 
-case "$ECHO" in
-  printf*) AC_MSG_RESULT([printf]) ;;
-  print*) AC_MSG_RESULT([print -r]) ;;
-  *) AC_MSG_RESULT([cat]) ;;
-esac
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
+
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
+
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
+    IFS="$lt_save_ifs"
+
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+      else
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	  # Cool, printf works
+	  :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        else
+	  # maybe with a smaller string...
+	  prev=:
+
+	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
+
+	  if test "$prev" != 'sed 50q "[$]0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+        fi
+      fi
+    fi
+  fi
+fi
 
-m4_ifdef([_AS_DETECT_SUGGESTED],
-[_AS_DETECT_SUGGESTED([
-  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
-    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-    PATH=/empty FPATH=/empty; export PATH FPATH
-    test "X`printf %s $ECHO`" = "X$ECHO" \
-      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
 
+AC_SUBST(lt_ECHO)
+])
 _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+_LT_DECL([], [ECHO], [1],
+    [An echo program that does not interpret backslashes])
 ])# _LT_PROG_ECHO_BACKSLASH
 
 
@@ -1208,7 +1251,7 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     if test "$lt_cv_prog_gnu_ld" = yes; then
       case `/usr/bin/file conftest.$ac_objext` in
@@ -1360,19 +1403,10 @@ if test -n "$RANLIB"; then
   esac
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 fi
-
-case $host_os in
-  darwin*)
-    lock_old_archive_extraction=yes ;;
-  *)
-    lock_old_archive_extraction=no ;;
-esac
 _LT_DECL([], [old_postinstall_cmds], [2])
 _LT_DECL([], [old_postuninstall_cmds], [2])
 _LT_TAGDECL([], [old_archive_cmds], [2],
     [Commands used to build an old-style archive])
-_LT_DECL([], [lock_old_archive_extraction], [0],
-    [Whether to use a lock for old archive extraction])
 ])# _LT_CMD_OLD_ARCHIVE
 
 
@@ -1397,15 +1431,15 @@ AC_CACHE_CHECK([$1], [$2],
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        $2=yes
@@ -1445,7 +1479,7 @@ AC_CACHE_CHECK([$1], [$2],
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          $2=yes
@@ -1508,11 +1542,6 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  mint*)
-    # On MiNT this can take a long time and run out of memory.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
   amigaos*)
     # On AmigaOS with pdksh, this test takes hours, literally.
     # So we just punt and use a minimum line length of 8192.
@@ -1577,8 +1606,8 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
-	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
 	      test $i != 17 # 1/2 MB should be enough
       do
         i=`expr $i + 1`
@@ -1629,7 +1658,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-[#line $LINENO "configure"
+[#line __oline__ "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -1670,13 +1699,7 @@ else
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
-   correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-void fnord () __attribute__((visibility("default")));
-#endif
-
-void fnord () { int i=42; }
+void fnord() { int i=42;}
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -1685,11 +1708,7 @@ int main ()
   if (self)
     {
       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else
-        {
-	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
-          else puts (dlerror ());
-	}
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
       /* dlclose (self); */
     }
   else
@@ -1865,16 +1884,16 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
@@ -2033,7 +2052,6 @@ m4_require([_LT_DECL_EGREP])dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_DECL_OBJDUMP])dnl
 m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
 AC_MSG_CHECKING([dynamic linker characteristics])
 m4_if([$1],
 	[], [
@@ -2042,23 +2060,16 @@ if test "$GCC" = yes; then
     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
     *) lt_awk_arg="/^libraries:/" ;;
   esac
-  case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
-  case $lt_search_path_spec in
-  *\;*)
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
-    ;;
-  *)
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
-    ;;
-  esac
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
   # Ok, now we have the path, separated by spaces, we can step through it
   # and add multilib dir if necessary.
   lt_tmp_lt_search_path_spec=
@@ -2071,7 +2082,7 @@ if test "$GCC" = yes; then
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
-  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
 BEGIN {RS=" "; FS="/|\n";} {
   lt_foo="";
   lt_count=0;
@@ -2091,13 +2102,7 @@ BEGIN {RS=" "; FS="/|\n";} {
   if (lt_foo != "") { lt_freq[[lt_foo]]++; }
   if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
 }'`
-  # AWK program above erroneously prepends '/' to C:/dos/paths
-  # for these hosts.
-  case $host_os in
-    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
-  esac
-  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi])
@@ -2185,7 +2190,7 @@ amigaos*)
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
@@ -2238,12 +2243,23 @@ cygwin* | mingw* | pw32* | cegcc*)
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-m4_if([$1], [],[
-      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -2343,19 +2359,6 @@ gnu*)
   hardcode_into_libs=yes
   ;;
 
-haiku*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
-  hardcode_into_libs=yes
-  ;;
-
 hpux9* | hpux10* | hpux11*)
   # Give a soname corresponding to the major version so that dld.sl refuses to
   # link against other versions.
@@ -2398,10 +2401,8 @@ hpux9* | hpux10* | hpux11*)
     soname_spec='${libname}${release}${shared_ext}$major'
     ;;
   esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
   postinstall_cmds='chmod 555 $lib'
-  # or fails outright, so override atomically:
-  install_override_mode=555
   ;;
 
 interix[[3-9]]*)
@@ -2468,35 +2469,26 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
-
   # Some binutils ld are patched to set DT_RUNPATH
-  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
-    [lt_cv_shlibpath_overrides_runpath=no
-    save_LDFLAGS=$LDFLAGS
-    save_libdir=$libdir
-    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
-	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
-    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
-	 [lt_cv_shlibpath_overrides_runpath=yes])])
-    LDFLAGS=$save_LDFLAGS
-    libdir=$save_libdir
-    ])
-  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+       [shlibpath_overrides_runpath=yes])])
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
 
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # Add ABI-specific directories to the system library path.
-  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
-
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -2508,6 +2500,18 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
@@ -2728,8 +2732,6 @@ _LT_DECL([], [library_names_spec], [1],
     The last name is the one that the linker finds with -lNAME]])
 _LT_DECL([], [soname_spec], [1],
     [[The coded name of the library, if different from the real name]])
-_LT_DECL([], [install_override_mode], [1],
-    [Permission mode override for installation of shared libraries])
 _LT_DECL([], [postinstall_cmds], [2],
     [Command to use after installation of a shared archive])
 _LT_DECL([], [postuninstall_cmds], [2],
@@ -2842,7 +2844,6 @@ AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
 m4_require([_LT_DECL_SED])dnl
 m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
 
 AC_ARG_WITH([gnu-ld],
     [AS_HELP_STRING([--with-gnu-ld],
@@ -2972,8 +2973,8 @@ case $host_os in
     fi
     ;;
 esac
-_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_TAGDECL([], [reload_cmds], [2])dnl
+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_DECL([], [reload_cmds], [2])dnl
 ])# _LT_CMD_RELOAD
 
 
@@ -3025,18 +3026,16 @@ mingw* | pw32*)
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
-  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+  if ( file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
-    # Keep this pattern in sync with the one in func_win32_libid.
-    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
     lt_cv_file_magic_cmd='$OBJDUMP -f'
   fi
   ;;
 
-cegcc*)
+cegcc)
   # use the weaker test based on 'objdump'. See mingw*.
   lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -3066,10 +3065,6 @@ gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-haiku*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
 hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
   case $host_cpu in
@@ -3078,11 +3073,11 @@ hpux10.20* | hpux11*)
     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
     ;;
   hppa*64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
     lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
     ;;
   *)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
     lt_cv_file_magic_test_file=/usr/lib/libc.sl
     ;;
   esac
@@ -3108,7 +3103,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-netbsd*)
+netbsd* | netbsdelf*-gnu)
   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   else
@@ -3246,19 +3241,7 @@ if test "$lt_cv_path_NM" != "no"; then
   NM="$lt_cv_path_NM"
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
-  if test -n "$DUMPBIN"; then :
-    # Let the user override the test.
-  else
-    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
-    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
-    *COFF*)
-      DUMPBIN="$DUMPBIN -symbols"
-      ;;
-    *)
-      DUMPBIN=:
-      ;;
-    esac
-  fi
+  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
   AC_SUBST([DUMPBIN])
   if test "$DUMPBIN" != ":"; then
     NM="$DUMPBIN"
@@ -3271,13 +3254,13 @@ _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
 AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
   [lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
   cat conftest.out >&AS_MESSAGE_LOG_FD
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
@@ -3300,7 +3283,7 @@ AC_DEFUN([LT_LIB_M],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 LIBM=
 case $host in
-*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
   # These system don't have libm, or don't need it
   ;;
 *-ncr-sysv4.3*)
@@ -3328,12 +3311,7 @@ m4_defun([_LT_COMPILER_NO_RTTI],
 _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
 if test "$GCC" = yes; then
-  case $cc_basename in
-  nvcc*)
-    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
-  *)
-    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
-  esac
+  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
 
   _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
     lt_cv_prog_compiler_rtti_exceptions,
@@ -3350,7 +3328,6 @@ _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
 m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([LT_PATH_NM])dnl
 AC_REQUIRE([LT_PATH_LD])dnl
 m4_require([_LT_DECL_SED])dnl
@@ -3476,7 +3453,7 @@ _LT_EOF
   if AC_TRY_EVAL(ac_compile); then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
       # Try sorting and uniquifying the output.
       if sort "$nlist" | uniq > "$nlist"T; then
 	mv -f "$nlist"T "$nlist"
@@ -3638,11 +3615,6 @@ m4_if([$1], [CXX], [
       # DJGPP does not support shared libraries at all
       _LT_TAGVAR(lt_prog_compiler_pic, $1)=
       ;;
-    haiku*)
-      # PIC is the default for Haiku.
-      # The "-static" flag exists, but is broken.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)=
-      ;;
     interix[[3-9]]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
@@ -3781,8 +3753,8 @@ m4_if([$1], [CXX], [
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    ;;
-	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
-	    # IBM XL 8.0, 9.0 on PPC and BlueGene
+	  xlc* | xlC*)
+	    # IBM XL 8.0 on PPC
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
@@ -3812,7 +3784,7 @@ m4_if([$1], [CXX], [
 	    ;;
 	esac
 	;;
-      netbsd*)
+      netbsd* | netbsdelf*-gnu)
 	;;
       *qnx* | *nto*)
         # QNX uses GNU C++, but need to define -shared option too, otherwise
@@ -3844,7 +3816,7 @@ m4_if([$1], [CXX], [
 	;;
       solaris*)
 	case $cc_basename in
-	  CC* | sunCC*)
+	  CC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -3948,12 +3920,6 @@ m4_if([$1], [CXX], [
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
 
-    haiku*)
-      # PIC is the default for Haiku.
-      # The "-static" flag exists, but is broken.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)=
-      ;;
-
     hpux*)
       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
@@ -3996,13 +3962,6 @@ m4_if([$1], [CXX], [
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
     esac
-
-    case $cc_basename in
-    nvcc*) # Cuda Compiler Driver 2.2
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC'
-      ;;
-    esac
   else
     # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
@@ -4066,7 +4025,7 @@ m4_if([$1], [CXX], [
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
 	;;
-      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+      pgcc* | pgf77* | pgf90* | pgf95*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@@ -4078,26 +4037,26 @@ m4_if([$1], [CXX], [
         # All Alpha code is PIC.
         _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
         ;;
-      xl* | bgxl* | bgf* | mpixl*)
-	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+      xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
 	;;
       *)
 	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ F* | *Sun*Fortran*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
-	  ;;
 	*Sun\ C*)
 	  # Sun C 5.9
 	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
 	esac
 	;;
       esac
@@ -4128,7 +4087,7 @@ m4_if([$1], [CXX], [
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       case $cc_basename in
-      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+      f77* | f90* | f95*)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
       *)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
@@ -4238,10 +4197,8 @@ m4_if([$1], [CXX], [
   aix[[4-9]]*)
     # If we're using GNU nm, then we don't want the "-C" option.
     # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    # Also, AIX nm treats weak defined symbols like other global defined
-    # symbols, whereas GNU nm marks them as "W".
     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     else
       _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     fi
@@ -4252,6 +4209,9 @@ m4_if([$1], [CXX], [
   cygwin* | mingw* | cegcc*)
     _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
+  linux* | k*bsd*-gnu)
+    _LT_TAGVAR(link_all_deplibs, $1)=no
+  ;;
   *)
     _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
@@ -4316,36 +4276,13 @@ dnl Note also adjust exclude_expsyms for C++ above.
   openbsd*)
     with_gnu_ld=no
     ;;
+  linux* | k*bsd*-gnu)
+    _LT_TAGVAR(link_all_deplibs, $1)=no
+    ;;
   esac
 
   _LT_TAGVAR(ld_shlibs, $1)=yes
-
-  # On some targets, GNU ld is compatible enough with the native linker
-  # that we're better off using the native interface for both.
-  lt_use_gnu_ld_interface=no
   if test "$with_gnu_ld" = yes; then
-    case $host_os in
-      aix*)
-	# The AIX port of GNU ld has always aspired to compatibility
-	# with the native linker.  However, as the warning in the GNU ld
-	# block says, versions before 2.19.5* couldn't really create working
-	# shared libraries, regardless of the interface used.
-	case `$LD -v 2>&1` in
-	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
-	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
-	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
-	  *)
-	    lt_use_gnu_ld_interface=yes
-	    ;;
-	esac
-	;;
-      *)
-	lt_use_gnu_ld_interface=yes
-	;;
-    esac
-  fi
-
-  if test "$lt_use_gnu_ld_interface" = yes; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
@@ -4379,12 +4316,11 @@ dnl Note also adjust exclude_expsyms for C++ above.
 	_LT_TAGVAR(ld_shlibs, $1)=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
 *** to be unable to reliably create shared libraries on AIX.
 *** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to install binutils
-*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
-*** You will then need to restart the configuration process.
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
 
 _LT_EOF
       fi
@@ -4420,7 +4356,6 @@ _LT_EOF
       # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
       # as there is no search path for DLLs.
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
       _LT_TAGVAR(always_export_symbols, $1)=no
       _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
@@ -4442,11 +4377,6 @@ _LT_EOF
       fi
       ;;
 
-    haiku*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
     interix[[3-9]]*)
       _LT_TAGVAR(hardcode_direct, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -4476,12 +4406,11 @@ _LT_EOF
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
-	pgf77* | pgf90* | pgf95* | pgfortran*)
-					# Portland Group f77 and f90 compilers
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -4492,17 +4421,13 @@ _LT_EOF
 	lf95*)				# Lahey Fortran 8.1
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
 	  tmp_sharedflag='--shared' ;;
-	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
-	nvcc*)	# Cuda Compiler Driver 2.2
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  _LT_TAGVAR(compiler_needs_object, $1)=yes
-	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  _LT_TAGVAR(compiler_needs_object, $1)=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
@@ -4518,17 +4443,17 @@ _LT_EOF
         fi
 
 	case $cc_basename in
-	xlf* | bgf* | bgxlf* | mpixlf*)
+	xlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
 	  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
 	  if test "x$supports_anon_versioning" = xyes; then
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
 	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
 	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -4537,7 +4462,7 @@ _LT_EOF
       fi
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
@@ -4649,10 +4574,8 @@ _LT_EOF
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	# Also, AIX nm treats weak defined symbols like other global
-	# defined symbols, whereas GNU nm marks them as "W".
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
 	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
@@ -4714,6 +4637,7 @@ _LT_EOF
 	if test "$aix_use_runtimelinking" = yes; then
 	  shared_flag="$shared_flag "'${wl}-G'
 	fi
+	_LT_TAGVAR(link_all_deplibs, $1)=no
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
@@ -4741,7 +4665,7 @@ _LT_EOF
         # empty executable.
         _LT_SYS_MODULE_PATH_AIX
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
       else
 	if test "$host_cpu" = ia64; then
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
@@ -4756,13 +4680,8 @@ _LT_EOF
 	  # -berok will link without error, but may produce a broken library.
 	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
 	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  if test "$with_gnu_ld" = yes; then
-	    # We only use this code for GNU lds that support --whole-archive.
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	  else
-	    # Exported symbols can be pulled into shared objects from archives
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	  fi
+	  # Exported symbols can be pulled into shared objects from archives
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
 	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 	  # This is similar to how AIX traditionally builds its shared libraries.
 	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
@@ -4801,7 +4720,7 @@ _LT_EOF
       # Tell ltmain to make .dll files, not .so files.
       shrext_cmds=".dll"
       # FIXME: Setting linknames here is a bad hack.
-      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
       _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
       # FIXME: Should let the user specify the lib program.
@@ -4868,7 +4787,7 @@ _LT_EOF
       ;;
 
     hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
@@ -4887,7 +4806,7 @@ _LT_EOF
       ;;
 
     hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
 	case $host_cpu in
 	hppa*64*)
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
@@ -4908,14 +4827,7 @@ _LT_EOF
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	m4_if($1, [], [
-	  # Older versions of the 11.00 compiler do not understand -b yet
-	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
-	  _LT_LINKER_OPTION([if $CC understands -b],
-	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
-	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
-	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
-	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
@@ -4943,19 +4855,19 @@ _LT_EOF
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
         save_LDFLAGS="$LDFLAGS"
         LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
         AC_LINK_IFELSE(int foo(void) {},
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
         )
         LDFLAGS="$save_LDFLAGS"
       else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -4964,7 +4876,7 @@ _LT_EOF
       _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
@@ -5017,17 +4929,17 @@ _LT_EOF
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
       _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
 	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -5037,13 +4949,13 @@ _LT_EOF
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
 	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
       else
 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -5234,38 +5146,36 @@ x|xyes)
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
-      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
-	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
-	[$RM conftest*
-	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-	  soname=conftest
-	  lib=conftest
-	  libobjs=conftest.$ac_objext
-	  deplibs=
-	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
-	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
-	  compiler_flags=-v
-	  linker_flags=-v
-	  verstring=
-	  output_objdir=.
-	  libname=conftest
-	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
-	  _LT_TAGVAR(allow_undefined_flag, $1)=
-	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
-	  then
-	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-	  else
-	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  fi
-	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-	else
-	  cat conftest.err 1>&5
-	fi
-	$RM conftest*
-	])
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+        _LT_TAGVAR(allow_undefined_flag, $1)=
+        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+        then
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        else
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+        fi
+        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $RM conftest*
+      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
       ;;
     esac
   fi
@@ -5431,14 +5341,14 @@ CC="$lt_save_CC"
 ])# _LT_LANG_C_CONFIG
 
 
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_CXX_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
+# _LT_PROG_CXX
+# ------------
+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+# compiler, we have our own version here.
+m4_defun([_LT_PROG_CXX],
+[
+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+AC_PROG_CXX
 if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
     ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
     (test "X$CXX" != "Xg++"))) ; then
@@ -5446,6 +5356,22 @@ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
 else
   _lt_caught_CXX_error=yes
 fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_CXX
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_CXX], [])
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[AC_REQUIRE([_LT_PROG_CXX])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
 
 AC_LANG_PUSH(C++)
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
@@ -5467,8 +5393,6 @@ _LT_TAGVAR(module_cmds, $1)=
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -5571,7 +5495,7 @@ if test "$_lt_caught_CXX_error" != yes; then
       # Commands to make compiler produce verbose output that lists
       # what "hidden" libraries, object files and flags are used when
       # linking a shared library.
-      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 
     else
       GXX=no
@@ -5683,7 +5607,7 @@ if test "$_lt_caught_CXX_error" != yes; then
           _LT_SYS_MODULE_PATH_AIX
           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
         else
           if test "$host_cpu" = ia64; then
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
@@ -5698,13 +5622,8 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    # -berok will link without error, but may produce a broken library.
 	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
 	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	    if test "$with_gnu_ld" = yes; then
-	      # We only use this code for GNU lds that support --whole-archive.
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	    else
-	      # Exported symbols can be pulled into shared objects from archives
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	    fi
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
 	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 	    # This is similar to how AIX traditionally builds its shared
 	    # libraries.
@@ -5737,7 +5656,6 @@ if test "$_lt_caught_CXX_error" != yes; then
         # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
         # as there is no search path for DLLs.
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
         _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
         _LT_TAGVAR(always_export_symbols, $1)=no
         _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
@@ -5798,11 +5716,6 @@ if test "$_lt_caught_CXX_error" != yes; then
       gnu*)
         ;;
 
-      haiku*)
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(link_all_deplibs, $1)=yes
-        ;;
-
       hpux9*)
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -5827,7 +5740,7 @@ if test "$_lt_caught_CXX_error" != yes; then
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
             ;;
           *)
             if test "$GXX" = yes; then
@@ -5892,7 +5805,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 	    ;;
           *)
 	    if test "$GXX" = yes; then
@@ -5935,7 +5848,7 @@ if test "$_lt_caught_CXX_error" != yes; then
         case $cc_basename in
           CC*)
 	    # SGI C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -5946,9 +5859,9 @@ if test "$_lt_caught_CXX_error" != yes; then
           *)
 	    if test "$GXX" = yes; then
 	      if test "$with_gnu_ld" = no; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	      else
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
 	      fi
 	    fi
 	    _LT_TAGVAR(link_all_deplibs, $1)=yes
@@ -5977,7 +5890,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -6014,26 +5927,26 @@ if test "$_lt_caught_CXX_error" != yes; then
           pgCC* | pgcpp*)
             # Portland Group C++ compiler
 	    case `$CC -V` in
-	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+	    *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
 	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
 	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
 		$RANLIB $oldlib'
 	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 	      ;;
-	    *) # Version 6 and above use weak symbols
+	    *) # Version 6 will use weak symbols
 	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 	      ;;
@@ -6041,7 +5954,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
             ;;
 	  cxx*)
 	    # Compaq C++
@@ -6060,9 +5973,9 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 	    ;;
-	  xl* | mpixl* | bgxl*)
+	  xl*)
 	    # IBM XL 8.0 on PPC, with GNU ld
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -6082,13 +5995,13 @@ if test "$_lt_caught_CXX_error" != yes; then
 	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	      _LT_TAGVAR(compiler_needs_object, $1)=yes
 
 	      # Not sure whether something based on
 	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
 	      # would be better.
-	      output_verbose_link_cmd='func_echo_all'
+	      output_verbose_link_cmd='echo'
 
 	      # Archives containing C++ object files must be created using
 	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -6157,7 +6070,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
 	  fi
-	  output_verbose_link_cmd=func_echo_all
+	  output_verbose_link_cmd=echo
 	else
 	  _LT_TAGVAR(ld_shlibs, $1)=no
 	fi
@@ -6192,15 +6105,15 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    case $host in
 	      osf3*)
 	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 		;;
 	      *)
 	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
 	          echo "-hidden">> $lib.exp~
-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
 	          $RM $lib.exp'
 	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
 		;;
@@ -6216,17 +6129,17 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 	    ;;
 	  *)
 	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
 	      case $host in
 	        osf3*)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 		  ;;
 	        *)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 		  ;;
 	      esac
 
@@ -6236,7 +6149,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 	      # Commands to make compiler produce verbose output that lists
 	      # what "hidden" libraries, object files and flags are used when
 	      # linking a shared library.
-	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 
 	    else
 	      # FIXME: insert proper C++ library support
@@ -6272,7 +6185,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 
       solaris*)
         case $cc_basename in
-          CC* | sunCC*)
+          CC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
             _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
 	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
@@ -6293,7 +6206,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    esac
 	    _LT_TAGVAR(link_all_deplibs, $1)=yes
 
-	    output_verbose_link_cmd='func_echo_all'
+	    output_verbose_link_cmd='echo'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -6320,7 +6233,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 	      else
 	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
 	        # platform.
@@ -6331,7 +6244,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 	      fi
 
 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
@@ -6385,10 +6298,6 @@ if test "$_lt_caught_CXX_error" != yes; then
           CC*)
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
-	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
-	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
-	      '"$_LT_TAGVAR(reload_cmds, $1)"
 	    ;;
 	  *)
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
@@ -6635,7 +6544,7 @@ linux*)
 
 solaris*)
   case $cc_basename in
-  CC* | sunCC*)
+  CC*)
     # The more standards-conforming stlport4 library is
     # incompatible with the Cstd library. Avoid specifying
     # it if it's in CXXFLAGS. Ignore libCrun as
@@ -6679,16 +6588,32 @@ _LT_TAGDECL([], [compiler_lib_search_path], [1],
 ])# _LT_SYS_HIDDEN_LIBDEPS
 
 
+# _LT_PROG_F77
+# ------------
+# Since AC_PROG_F77 is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_F77],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+AC_PROG_F77
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_F77
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_F77], [])
+
+
 # _LT_LANG_F77_CONFIG([TAG])
 # --------------------------
 # Ensure that the configuration variables for a Fortran 77 compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_F77_CONFIG],
-[AC_LANG_PUSH(Fortran 77)
-if test -z "$F77" || test "X$F77" = "Xno"; then
-  _lt_disable_F77=yes
-fi
+[AC_REQUIRE([_LT_PROG_F77])dnl
+AC_LANG_PUSH(Fortran 77)
 
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_TAGVAR(allow_undefined_flag, $1)=
@@ -6707,8 +6632,6 @@ _LT_TAGVAR(module_cmds, $1)=
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -6808,17 +6731,32 @@ AC_LANG_POP
 ])# _LT_LANG_F77_CONFIG
 
 
+# _LT_PROG_FC
+# -----------
+# Since AC_PROG_FC is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_FC],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+AC_PROG_FC
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_FC
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_FC], [])
+
+
 # _LT_LANG_FC_CONFIG([TAG])
 # -------------------------
 # Ensure that the configuration variables for a Fortran compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_FC_CONFIG],
-[AC_LANG_PUSH(Fortran)
-
-if test -z "$FC" || test "X$FC" = "Xno"; then
-  _lt_disable_FC=yes
-fi
+[AC_REQUIRE([_LT_PROG_FC])dnl
+AC_LANG_PUSH(Fortran)
 
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_TAGVAR(allow_undefined_flag, $1)=
@@ -6837,8 +6775,6 @@ _LT_TAGVAR(module_cmds, $1)=
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -6984,8 +6920,6 @@ _LT_CC_BASENAME([$compiler])
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 
 if test -n "$compiler"; then
   _LT_COMPILER_NO_RTTI($1)
@@ -7347,7 +7281,7 @@ _LT_EOF
 func_dirname ()
 {
   # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
   if test "X$func_dirname_result" = "X${1}"; then
     func_dirname_result="${3}"
   else
@@ -7358,7 +7292,7 @@ func_dirname ()
 # func_basename file
 func_basename ()
 {
-  func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
 }
 
 dnl func_dirname_and_basename
@@ -7374,8 +7308,10 @@ dnl so there is no need for it here.
 func_stripname ()
 {
   case ${2} in
-    .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
   esac
 }
 
@@ -7386,20 +7322,20 @@ my_sed_long_arg='1s/^-[[^=]]*=//'
 # func_opt_split
 func_opt_split ()
 {
-  func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
 }
 
 # func_lo2o object
 func_lo2o ()
 {
-  func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
 }
 
 # func_xform libobj-or-source
 func_xform ()
 {
-  func_xform_result=`$ECHO "${1}" | $SED 's/\.[[^.]]*$/.lo/'`
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
 }
 
 # func_arith arithmetic-term...
@@ -7447,15 +7383,14 @@ _LT_EOF
 
 # Helper functions for option handling.                    -*- Autoconf -*-
 #
-#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-#   Inc.
+#   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
 #   Written by Gary V. Vaughan, 2004
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 7 ltoptions.m4
+# serial 6 ltoptions.m4
 
 # This is to help aclocal find these macros, as it can't see m4_define.
 AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
@@ -7570,7 +7505,7 @@ LT_OPTION_DEFINE([LT_INIT], [win32-dll],
 [enable_win32_dll=yes
 
 case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
   AC_CHECK_TOOL(AS, as, false)
   AC_CHECK_TOOL(DLLTOOL, dlltool, false)
   AC_CHECK_TOOL(OBJDUMP, objdump, false)
@@ -7578,13 +7513,13 @@ case $host in
 esac
 
 test -z "$AS" && AS=as
-_LT_DECL([], [AS],      [1], [Assembler program])dnl
+_LT_DECL([], [AS],      [0], [Assembler program])dnl
 
 test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
 
 test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
 ])# win32-dll
 
 AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
@@ -7944,29 +7879,29 @@ m4_define([lt_dict_filter],
 
 # Generated from ltversion.in.
 
-# serial 3175 ltversion.m4
+# serial 3017 ltversion.m4
 # This file is part of GNU Libtool
 
-m4_define([LT_PACKAGE_VERSION], [2.2.10])
-m4_define([LT_PACKAGE_REVISION], [1.3175])
+m4_define([LT_PACKAGE_VERSION], [2.2.6b])
+m4_define([LT_PACKAGE_REVISION], [1.3017])
 
 AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.2.10'
-macro_revision='1.3175'
+[macro_version='2.2.6b'
+macro_revision='1.3017'
 _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
 _LT_DECL(, macro_revision, 0)
 ])
 
 # lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
 #
-#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
 #   Written by Scott James Remnant, 2004.
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 5 lt~obsolete.m4
+# serial 4 lt~obsolete.m4
 
 # These exist entirely to fool aclocal when bootstrapping libtool.
 #
@@ -8036,6 +7971,7 @@ m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
 m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
 m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
 m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_RC],		[AC_DEFUN([AC_LIBTOOL_RC])])
 m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
 m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
 m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
@@ -8048,13 +7984,6 @@ m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
 m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
 m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
 m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
-m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
-m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
-m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
-m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
-m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
-m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
-m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
 
 # Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 #
diff --git a/config.guess b/config.guess
index dc84c68..c2246a4 100755
--- a/config.guess
+++ b/config.guess
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
 #   Free Software Foundation, Inc.
 
-timestamp='2009-11-20'
+timestamp='2009-12-30'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -56,8 +56,9 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
+Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
diff --git a/config.sub b/config.sub
index 2a55a50..c2d1257 100755
--- a/config.sub
+++ b/config.sub
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
 #   Free Software Foundation, Inc.
 
-timestamp='2009-11-20'
+timestamp='2010-01-22'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -75,8 +75,9 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
+Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -380,7 +381,8 @@ case $basic_machine in
 	| sparclite-* \
 	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile-* | tilegx-* \
 	| tron-* \
 	| ubicom32-* \
 	| v850-* | v850e-* | vax-* \
@@ -1085,6 +1087,11 @@ case $basic_machine in
 		basic_machine=tic6x-unknown
 		os=-coff
 		;;
+        # This must be matched before tile*.
+        tilegx*)
+		basic_machine=tilegx-unknown
+		os=-linux-gnu
+		;;
 	tile*)
 		basic_machine=tile-unknown
 		os=-linux-gnu
@@ -1435,6 +1442,8 @@ case $os in
 	-dicos*)
 		os=-dicos
 		;;
+        -nacl*)
+	        ;;
 	-none)
 		;;
 	*)
diff --git a/configure b/configure
index 8324002..ed64346 100755
--- a/configure
+++ b/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.66 for NetNuke 2.0.2.
+# Generated by GNU Autoconf 2.67 for NetNuke 2.0.2.
 #
 # Report bugs to <jhunkeler@gmail.com>.
 #
@@ -173,14 +173,6 @@ test x\$exitcode = x0 || exit 1"
   as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
   eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
   test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-
-  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
-    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
-    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
-    PATH=/empty FPATH=/empty; export PATH FPATH
-    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
-      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
 test \$(( 1 + 1 )) = 2 || exit 1"
   if (eval "$as_required") 2>/dev/null; then :
   as_have_required=yes
@@ -536,8 +528,155 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 # Sed expression to map a string onto a valid variable name.
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
+
+
+# Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
+case X$lt_ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
+  ;;
+esac
+
+ECHO=${lt_ECHO-echo}
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<_LT_EOF
+$*
+_LT_EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
+
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
+
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
+    IFS="$lt_save_ifs"
+
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+      else
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	  # Cool, printf works
+	  :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
+        else
+	  # maybe with a smaller string...
+	  prev=:
+
+	  for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
+
+	  if test "$prev" != 'sed 50q "$0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+        fi
+      fi
+    fi
+  fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
+
+
+
 
 test -n "$DJDIR" || exec 7<&0 </dev/null
 exec 6>&1
@@ -617,6 +756,7 @@ OTOOL
 LIPO
 NMEDIT
 DSYMUTIL
+lt_ECHO
 AR
 OBJDUMP
 NM
@@ -798,8 +938,9 @@ do
   fi
 
   case $ac_option in
-  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *)	ac_optarg=yes ;;
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
   esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
@@ -1449,7 +1590,7 @@ test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 NetNuke configure 2.0.2
-generated by GNU Autoconf 2.66
+generated by GNU Autoconf 2.67
 
 Copyright (C) 2010 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
@@ -1598,7 +1739,7 @@ $as_echo "$ac_try_echo"; } >&5
     mv -f conftest.er1 conftest.err
   fi
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } >/dev/null && {
+  test $ac_status = 0; } > conftest.i && {
 	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        }; then :
@@ -2002,7 +2143,7 @@ if ac_fn_c_try_cpp "$LINENO"; then :
 else
   ac_header_preproc=no
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
 $as_echo "$ac_header_preproc" >&6; }
 
@@ -2050,7 +2191,7 @@ This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by NetNuke $as_me 2.0.2, which was
-generated by GNU Autoconf 2.66.  Invocation command line was
+generated by GNU Autoconf 2.67.  Invocation command line was
 
   $ $0 $@
 
@@ -2308,7 +2449,7 @@ $as_echo "$as_me: loading site script $ac_site_file" >&6;}
       || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
   fi
 done
 
@@ -2552,11 +2693,11 @@ am_lf='
 '
 case `pwd` in
   *[\\\"\#\$\&\'\`$am_lf]*)
-    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;;
 esac
 case $srcdir in
   *[\\\"\#\$\&\'\`$am_lf\ \	]*)
-    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;;
 esac
 
 # Do `set' in a subshell so we don't clobber the current shell's
@@ -3273,7 +3414,7 @@ fi
 test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 
 # Provide some information about the compiler.
 $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
@@ -3388,7 +3529,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
@@ -3431,7 +3572,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 rm -f conftest conftest$ac_cv_exeext
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
@@ -3490,7 +3631,7 @@ $as_echo "$ac_try_echo"; } >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot run C compiled programs.
 If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
     fi
   fi
 fi
@@ -3542,7 +3683,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
@@ -4253,8 +4394,8 @@ esac
 
 
 
-macro_version='2.2.10'
-macro_revision='1.3175'
+macro_version='2.2.6b'
+macro_revision='1.3017'
 
 
 
@@ -4292,7 +4433,7 @@ fi
 $as_echo "$ac_cv_build" >&6; }
 case $ac_cv_build in
 *-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
 esac
 build=$ac_cv_build
 ac_save_IFS=$IFS; IFS='-'
@@ -4325,7 +4466,7 @@ fi
 $as_echo "$ac_cv_host" >&6; }
 case $ac_cv_host in
 *-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
 esac
 host=$ac_cv_host
 ac_save_IFS=$IFS; IFS='-'
@@ -4341,75 +4482,6 @@ IFS=$ac_save_IFS
 case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
 
 
-# Backslashify metacharacters that are still active within
-# double-quoted strings.
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
-$as_echo_n "checking how to print strings... " >&6; }
-# Test print first, because it will be a builtin if present.
-if test "X`print -r -- -n 2>/dev/null`" = X-n && \
-   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='print -r --'
-elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='printf %s\n'
-else
-  # Use this function as a fallback that always works.
-  func_fallback_echo ()
-  {
-    eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-  }
-  ECHO='func_fallback_echo'
-fi
-
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO ""
-}
-
-case "$ECHO" in
-  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
-$as_echo "printf" >&6; } ;;
-  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
-$as_echo "print -r" >&6; } ;;
-  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
-$as_echo "cat" >&6; } ;;
-esac
-
-
-
-
-
-
-
-
-
-
-
-
-
-
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
 $as_echo_n "checking for a sed that does not truncate output... " >&6; }
 if test "${ac_cv_path_SED+set}" = set; then :
@@ -4875,11 +4947,8 @@ if test "$lt_cv_path_NM" != "no"; then
   NM="$lt_cv_path_NM"
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
-  if test -n "$DUMPBIN"; then :
-    # Let the user override the test.
-  else
-    if test -n "$ac_tool_prefix"; then
-  for ac_prog in dumpbin "link -dump"
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
@@ -4923,7 +4992,7 @@ fi
 fi
 if test -z "$DUMPBIN"; then
   ac_ct_DUMPBIN=$DUMPBIN
-  for ac_prog in dumpbin "link -dump"
+  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
@@ -4978,15 +5047,6 @@ esac
   fi
 fi
 
-    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
-    *COFF*)
-      DUMPBIN="$DUMPBIN -symbols"
-      ;;
-    *)
-      DUMPBIN=:
-      ;;
-    esac
-  fi
 
   if test "$DUMPBIN" != ":"; then
     NM="$DUMPBIN"
@@ -5006,13 +5066,13 @@ if test "${lt_cv_nm_interface+set}" = set; then :
 else
   lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval echo "\"\$as_me:5069: $ac_compile\"" >&5)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval echo "\"\$as_me:5072: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  (eval echo "\"\$as_me:5075: output\"" >&5)
   cat conftest.out >&5
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
@@ -5058,11 +5118,6 @@ else
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  mint*)
-    # On MiNT this can take a long time and run out of memory.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
   amigaos*)
     # On AmigaOS with pdksh, this test takes hours, literally.
     # So we just punt and use a minimum line length of 8192.
@@ -5127,8 +5182,8 @@ else
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
-	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+      while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
 	      test $i != 17 # 1/2 MB should be enough
       do
         i=`expr $i + 1`
@@ -5399,18 +5454,16 @@ mingw* | pw32*)
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
-  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+  if ( file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
-    # Keep this pattern in sync with the one in func_win32_libid.
-    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
     lt_cv_file_magic_cmd='$OBJDUMP -f'
   fi
   ;;
 
-cegcc*)
+cegcc)
   # use the weaker test based on 'objdump'. See mingw*.
   lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -5440,10 +5493,6 @@ gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-haiku*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
 hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
   case $host_cpu in
@@ -5452,11 +5501,11 @@ hpux10.20* | hpux11*)
     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
     ;;
   hppa*64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
     lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
     ;;
   *)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
     lt_cv_file_magic_test_file=/usr/lib/libc.sl
     ;;
   esac
@@ -5482,7 +5531,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-netbsd*)
+netbsd* | netbsdelf*-gnu)
   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   else
@@ -5894,18 +5943,6 @@ if test -n "$RANLIB"; then
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 fi
 
-case $host_os in
-  darwin*)
-    lock_old_archive_extraction=yes ;;
-  *)
-    lock_old_archive_extraction=no ;;
-esac
-
-
-
-
-
-
 
 
 
@@ -6075,8 +6112,8 @@ _LT_EOF
   test $ac_status = 0; }; then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
-  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; } && test -s "$nlist"; then
@@ -6230,7 +6267,7 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  echo '#line 6270 "configure"' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -6942,38 +6979,6 @@ rm -f core conftest.err conftest.$ac_objext \
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
-$as_echo_n "checking for -force_load linker flag... " >&6; }
-if test "${lt_cv_ld_force_load+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_ld_force_load=no
-      cat > conftest.c << _LT_EOF
-int forced_loaded() { return 2;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
-      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
-      echo "$AR cru libconftest.a conftest.o" >&5
-      $AR cru libconftest.a conftest.o 2>&5
-      echo "$RANLIB libconftest.a" >&5
-      $RANLIB libconftest.a 2>&5
-      cat > conftest.c << _LT_EOF
-int main() { return 0;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
-      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
-      _lt_result=$?
-      if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
-	lt_cv_ld_force_load=yes
-      else
-	cat conftest.err >&5
-      fi
-        rm -f conftest.err libconftest.a conftest conftest.c
-        rm -rf conftest.dSYM
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
-$as_echo "$lt_cv_ld_force_load" >&6; }
     case $host_os in
     rhapsody* | darwin1.[012])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
@@ -7001,7 +7006,7 @@ $as_echo "$lt_cv_ld_force_load" >&6; }
     else
       _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
     fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+    if test "$DSYMUTIL" != ":"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -7051,7 +7056,7 @@ else
   # Broken: fails on valid input.
 continue
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
@@ -7067,11 +7072,11 @@ else
 ac_preproc_ok=:
 break
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then :
   break
 fi
@@ -7110,7 +7115,7 @@ else
   # Broken: fails on valid input.
 continue
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
@@ -7126,18 +7131,18 @@ else
 ac_preproc_ok=:
 break
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then :
 
 else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 
 ac_ext=c
@@ -7291,8 +7296,6 @@ done
 
 
 
-
-
 # Set options
 
 
@@ -7415,7 +7418,6 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 
 
 
-
 test -z "$LN_S" && LN_S="ln -s"
 
 
@@ -7465,6 +7467,19 @@ _ACEOF
 
 
 
+
+
+
+
+
+
+
+
+
+
+
+
+
 case $host_os in
 aix3*)
   # AIX sometimes has problems with the GCC collect2 program.  For some
@@ -7477,6 +7492,23 @@ aix3*)
   ;;
 esac
 
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
 # Global variables:
 ofile=libtool
 can_build_shared=yes
@@ -7505,7 +7537,7 @@ for cc_temp in $compiler""; do
     *) break;;
   esac
 done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
 
 # Only perform the check for file, if the check method requires it
@@ -7710,12 +7742,7 @@ if test -n "$compiler"; then
 lt_prog_compiler_no_builtin_flag=
 
 if test "$GCC" = yes; then
-  case $cc_basename in
-  nvcc*)
-    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
-  *)
-    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
-  esac
+  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
@@ -7735,15 +7762,15 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7765: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   echo "$as_me:7769: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_rtti_exceptions=yes
@@ -7821,12 +7848,6 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
       lt_prog_compiler_pic='-fno-common'
       ;;
 
-    haiku*)
-      # PIC is the default for Haiku.
-      # The "-static" flag exists, but is broken.
-      lt_prog_compiler_static=
-      ;;
-
     hpux*)
       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
@@ -7869,13 +7890,6 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
       lt_prog_compiler_pic='-fPIC'
       ;;
     esac
-
-    case $cc_basename in
-    nvcc*) # Cuda Compiler Driver 2.2
-      lt_prog_compiler_wl='-Xlinker '
-      lt_prog_compiler_pic='-Xcompiler -fPIC'
-      ;;
-    esac
   else
     # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
@@ -7938,7 +7952,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 	lt_prog_compiler_pic='--shared'
 	lt_prog_compiler_static='--static'
 	;;
-      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+      pgcc* | pgf77* | pgf90* | pgf95*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
 	lt_prog_compiler_wl='-Wl,'
@@ -7950,26 +7964,26 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
         # All Alpha code is PIC.
         lt_prog_compiler_static='-non_shared'
         ;;
-      xl* | bgxl* | bgf* | mpixl*)
-	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+      xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
 	lt_prog_compiler_wl='-Wl,'
 	lt_prog_compiler_pic='-qpic'
 	lt_prog_compiler_static='-qstaticlink'
 	;;
       *)
 	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ F* | *Sun*Fortran*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  lt_prog_compiler_pic='-KPIC'
-	  lt_prog_compiler_static='-Bstatic'
-	  lt_prog_compiler_wl=''
-	  ;;
 	*Sun\ C*)
 	  # Sun C 5.9
 	  lt_prog_compiler_pic='-KPIC'
 	  lt_prog_compiler_static='-Bstatic'
 	  lt_prog_compiler_wl='-Wl,'
 	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
 	esac
 	;;
       esac
@@ -8000,7 +8014,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
       lt_prog_compiler_pic='-KPIC'
       lt_prog_compiler_static='-Bstatic'
       case $cc_basename in
-      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+      f77* | f90* | f95*)
 	lt_prog_compiler_wl='-Qoption ld ';;
       *)
 	lt_prog_compiler_wl='-Wl,';;
@@ -8087,15 +8101,15 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8104: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   echo "$as_me:8108: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_pic_works=yes
@@ -8143,7 +8157,7 @@ else
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&5
-       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          lt_cv_prog_compiler_static_works=yes
@@ -8192,16 +8206,16 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8209: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   echo "$as_me:8213: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o=yes
@@ -8247,16 +8261,16 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8264: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   echo "$as_me:8268: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o=yes
@@ -8366,36 +8380,13 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
   openbsd*)
     with_gnu_ld=no
     ;;
+  linux* | k*bsd*-gnu)
+    link_all_deplibs=no
+    ;;
   esac
 
   ld_shlibs=yes
-
-  # On some targets, GNU ld is compatible enough with the native linker
-  # that we're better off using the native interface for both.
-  lt_use_gnu_ld_interface=no
   if test "$with_gnu_ld" = yes; then
-    case $host_os in
-      aix*)
-	# The AIX port of GNU ld has always aspired to compatibility
-	# with the native linker.  However, as the warning in the GNU ld
-	# block says, versions before 2.19.5* couldn't really create working
-	# shared libraries, regardless of the interface used.
-	case `$LD -v 2>&1` in
-	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
-	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
-	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
-	  *)
-	    lt_use_gnu_ld_interface=yes
-	    ;;
-	esac
-	;;
-      *)
-	lt_use_gnu_ld_interface=yes
-	;;
-    esac
-  fi
-
-  if test "$lt_use_gnu_ld_interface" = yes; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
@@ -8429,12 +8420,11 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
 	ld_shlibs=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
 *** to be unable to reliably create shared libraries on AIX.
 *** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to install binutils
-*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
-*** You will then need to restart the configuration process.
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
 
 _LT_EOF
       fi
@@ -8470,7 +8460,6 @@ _LT_EOF
       # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
       # as there is no search path for DLLs.
       hardcode_libdir_flag_spec='-L$libdir'
-      export_dynamic_flag_spec='${wl}--export-all-symbols'
       allow_undefined_flag=unsupported
       always_export_symbols=no
       enable_shared_with_static_runtimes=yes
@@ -8492,11 +8481,6 @@ _LT_EOF
       fi
       ;;
 
-    haiku*)
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      link_all_deplibs=yes
-      ;;
-
     interix[3-9]*)
       hardcode_direct=no
       hardcode_shlibpath_var=no
@@ -8526,12 +8510,11 @@ _LT_EOF
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
-	pgf77* | pgf90* | pgf95* | pgfortran*)
-					# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -8542,17 +8525,13 @@ _LT_EOF
 	lf95*)				# Lahey Fortran 8.1
 	  whole_archive_flag_spec=
 	  tmp_sharedflag='--shared' ;;
-	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	xl[cC]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
-	nvcc*)	# Cuda Compiler Driver 2.2
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  compiler_needs_object=yes
-	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  compiler_needs_object=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
@@ -8568,17 +8547,17 @@ _LT_EOF
         fi
 
 	case $cc_basename in
-	xlf* | bgf* | bgxlf* | mpixlf*)
+	xlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
 	  hardcode_libdir_flag_spec=
 	  hardcode_libdir_flag_spec_ld='-rpath $libdir'
-	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
 	  if test "x$supports_anon_versioning" = xyes; then
 	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
 	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
 	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -8587,7 +8566,7 @@ _LT_EOF
       fi
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
@@ -8699,10 +8678,8 @@ _LT_EOF
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	# Also, AIX nm treats weak defined symbols like other global
-	# defined symbols, whereas GNU nm marks them as "W".
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
 	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
@@ -8764,6 +8741,7 @@ _LT_EOF
 	if test "$aix_use_runtimelinking" = yes; then
 	  shared_flag="$shared_flag "'${wl}-G'
 	fi
+	link_all_deplibs=no
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
@@ -8820,7 +8798,7 @@ rm -f core conftest.err conftest.$ac_objext \
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
         hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
       else
 	if test "$host_cpu" = ia64; then
 	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
@@ -8864,13 +8842,8 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	  # -berok will link without error, but may produce a broken library.
 	  no_undefined_flag=' ${wl}-bernotok'
 	  allow_undefined_flag=' ${wl}-berok'
-	  if test "$with_gnu_ld" = yes; then
-	    # We only use this code for GNU lds that support --whole-archive.
-	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	  else
-	    # Exported symbols can be pulled into shared objects from archives
-	    whole_archive_flag_spec='$convenience'
-	  fi
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec='$convenience'
 	  archive_cmds_need_lc=yes
 	  # This is similar to how AIX traditionally builds its shared libraries.
 	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
@@ -8909,7 +8882,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       # Tell ltmain to make .dll files, not .so files.
       shrext_cmds=".dll"
       # FIXME: Setting linknames here is a bad hack.
-      archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+      archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
       old_archive_from_new_cmds='true'
       # FIXME: Should let the user specify the lib program.
@@ -8925,11 +8898,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
   hardcode_direct=no
   hardcode_automatic=yes
   hardcode_shlibpath_var=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
-  else
-    whole_archive_flag_spec=''
-  fi
+  whole_archive_flag_spec=''
   link_all_deplibs=yes
   allow_undefined_flag="$_lt_dar_allow_undefined"
   case $cc_basename in
@@ -8937,7 +8906,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
      *) _lt_dar_can_shared=$GCC ;;
   esac
   if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=func_echo_all
+    output_verbose_link_cmd=echo
     archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
     module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
     archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -9003,7 +8972,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
 	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
@@ -9022,7 +8991,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
 	case $host_cpu in
 	hppa*64*)
 	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
@@ -9043,46 +9012,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-
-	  # Older versions of the 11.00 compiler do not understand -b yet
-	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
-	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
-$as_echo_n "checking if $CC understands -b... " >&6; }
-if test "${lt_cv_prog_compiler__b+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler__b=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS -b"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler__b=yes
-       fi
-     else
-       lt_cv_prog_compiler__b=yes
-     fi
-   fi
-   $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
-$as_echo "$lt_cv_prog_compiler__b" >&6; }
-
-if test x"$lt_cv_prog_compiler__b" = xyes; then
-    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-else
-    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-fi
-
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
@@ -9110,7 +9040,7 @@ fi
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
@@ -9121,15 +9051,15 @@ fi
 int foo(void) {}
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
-  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
 
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
         LDFLAGS="$save_LDFLAGS"
       else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
       archive_cmds_need_lc='no'
       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
@@ -9138,7 +9068,7 @@ rm -f core conftest.err conftest.$ac_objext \
       link_all_deplibs=yes
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
@@ -9191,17 +9121,17 @@ rm -f core conftest.err conftest.$ac_objext \
       hardcode_libdir_flag_spec='-L$libdir'
       hardcode_minus_L=yes
       allow_undefined_flag=unsupported
-      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
       old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
       archive_cmds_need_lc='no'
       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
@@ -9211,13 +9141,13 @@ rm -f core conftest.err conftest.$ac_objext \
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec='-rpath $libdir'
@@ -9420,50 +9350,44 @@ x|xyes)
       # to ld, don't add -lc before -lgcc.
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-if test "${lt_cv_archive_cmds_need_lc+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  $RM conftest*
-	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; } 2>conftest.err; then
-	  soname=conftest
-	  lib=conftest
-	  libobjs=conftest.$ac_objext
-	  deplibs=
-	  wl=$lt_prog_compiler_wl
-	  pic_flag=$lt_prog_compiler_pic
-	  compiler_flags=-v
-	  linker_flags=-v
-	  verstring=
-	  output_objdir=.
-	  libname=conftest
-	  lt_save_allow_undefined_flag=$allow_undefined_flag
-	  allow_undefined_flag=
-	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl
+	pic_flag=$lt_prog_compiler_pic
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag
+        allow_undefined_flag=
+        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
   (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
-	  then
-	    lt_cv_archive_cmds_need_lc=no
-	  else
-	    lt_cv_archive_cmds_need_lc=yes
-	  fi
-	  allow_undefined_flag=$lt_save_allow_undefined_flag
-	else
-	  cat conftest.err 1>&5
-	fi
-	$RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
-$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
-      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+        then
+	  archive_cmds_need_lc=no
+        else
+	  archive_cmds_need_lc=yes
+        fi
+        allow_undefined_flag=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $RM conftest*
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
+$as_echo "$archive_cmds_need_lc" >&6; }
       ;;
     esac
   fi
@@ -9634,23 +9558,16 @@ if test "$GCC" = yes; then
     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
     *) lt_awk_arg="/^libraries:/" ;;
   esac
-  case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
-  case $lt_search_path_spec in
-  *\;*)
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
-    ;;
-  *)
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
-    ;;
-  esac
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
   # Ok, now we have the path, separated by spaces, we can step through it
   # and add multilib dir if necessary.
   lt_tmp_lt_search_path_spec=
@@ -9663,7 +9580,7 @@ if test "$GCC" = yes; then
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
-  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
 BEGIN {RS=" "; FS="/|\n";} {
   lt_foo="";
   lt_count=0;
@@ -9683,13 +9600,7 @@ BEGIN {RS=" "; FS="/|\n";} {
   if (lt_foo != "") { lt_freq[lt_foo]++; }
   if (lt_freq[lt_foo] == 1) { print lt_foo; }
 }'`
-  # AWK program above erroneously prepends '/' to C:/dos/paths
-  # for these hosts.
-  case $host_os in
-    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
-  esac
-  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi
@@ -9777,7 +9688,7 @@ amigaos*)
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
@@ -9830,12 +9741,23 @@ cygwin* | mingw* | pw32* | cegcc*)
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-
-      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -9935,19 +9857,6 @@ gnu*)
   hardcode_into_libs=yes
   ;;
 
-haiku*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
-  hardcode_into_libs=yes
-  ;;
-
 hpux9* | hpux10* | hpux11*)
   # Give a soname corresponding to the major version so that dld.sl refuses to
   # link against other versions.
@@ -9990,10 +9899,8 @@ hpux9* | hpux10* | hpux11*)
     soname_spec='${libname}${release}${shared_ext}$major'
     ;;
   esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
   postinstall_cmds='chmod 555 $lib'
-  # or fails outright, so override atomically:
-  install_override_mode=555
   ;;
 
 interix[3-9]*)
@@ -10060,17 +9967,12 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
-
   # Some binutils ld are patched to set DT_RUNPATH
-  if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_shlibpath_overrides_runpath=no
-    save_LDFLAGS=$LDFLAGS
-    save_libdir=$libdir
-    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
-	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
-    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -10083,31 +9985,23 @@ main ()
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
   if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
-  lt_cv_shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=yes
 fi
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-    LDFLAGS=$save_LDFLAGS
-    libdir=$save_libdir
-
-fi
-
-  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
 
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # Add ABI-specific directories to the system library path.
-  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
-
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -10119,6 +10013,18 @@ fi
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
@@ -10409,11 +10315,6 @@ fi
 
 
 
-
-
-
-
-
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
 $as_echo_n "checking how to hardcode library paths into programs... " >&6; }
 hardcode_action=
@@ -10744,7 +10645,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line $LINENO "configure"
+#line 10648 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10785,13 +10686,7 @@ else
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
-   correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-void fnord () __attribute__((visibility("default")));
-#endif
-
-void fnord () { int i=42; }
+void fnord() { int i=42;}
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -10800,11 +10695,7 @@ int main ()
   if (self)
     {
       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else
-        {
-	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
-          else puts (dlerror ());
-	}
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
       /* dlclose (self); */
     }
   else
@@ -10850,7 +10741,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line $LINENO "configure"
+#line 10744 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10891,13 +10782,7 @@ else
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
-   correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-void fnord () __attribute__((visibility("default")));
-#endif
-
-void fnord () { int i=42; }
+void fnord() { int i=42;}
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -10906,11 +10791,7 @@ int main ()
   if (self)
     {
       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else
-        {
-	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
-          else puts (dlerror ());
-	}
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
       /* dlclose (self); */
     }
   else
@@ -11557,7 +11438,7 @@ else
      { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error 77 "cannot compute sizeof (unsigned long long)
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
    else
      ac_cv_sizeof_unsigned_long_long=0
    fi
@@ -11590,7 +11471,7 @@ else
      { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error 77 "cannot compute sizeof (unsigned long int)
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
    else
      ac_cv_sizeof_unsigned_long_int=0
    fi
@@ -12374,7 +12255,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # values after options handling.
 ac_log="
 This file was extended by NetNuke $as_me 2.0.2, which was
-generated by GNU Autoconf 2.66.  Invocation command line was
+generated by GNU Autoconf 2.67.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -12441,7 +12322,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 NetNuke config.status 2.0.2
-configured by $0, generated by GNU Autoconf 2.66,
+configured by $0, generated by GNU Autoconf 2.67,
   with options \\"\$ac_cs_config\\"
 
 Copyright (C) 2010 Free Software Foundation, Inc.
@@ -12462,11 +12343,16 @@ ac_need_defaults=:
 while test $# != 0
 do
   case $1 in
-  --*=*)
+  --*=?*)
     ac_option=`expr "X$1" : 'X\([^=]*\)='`
     ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
   *)
     ac_option=$1
     ac_optarg=$2
@@ -12488,6 +12374,7 @@ do
     $ac_shift
     case $ac_optarg in
     *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
     esac
     as_fn_append CONFIG_FILES " '$ac_optarg'"
     ac_need_defaults=false;;
@@ -12563,143 +12450,131 @@ AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 sed_quote_subst='$sed_quote_subst'
 double_quote_subst='$double_quote_subst'
 delay_variable_subst='$delay_variable_subst'
-enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
-macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
-macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
-enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
-pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
-enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
-SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
-ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
-host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
-host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
-host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
-build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
-build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
-build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
-SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
-Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
-GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
-EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
-FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
-LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
-NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
-LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
-max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
-ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
-exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
-lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
-lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
-lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
-reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
-reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
-OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
-deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
-file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
-AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
-AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
-STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
-RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
-old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
-old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
-old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
-lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
-CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
-CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
-compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
-GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
-objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
-MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
-need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
-DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
-NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
-LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
-OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
-OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
-libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
-shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
-extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
-archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
-export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
-whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
-compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
-old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
-archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
-archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
-module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
-module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
-with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
-allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
-no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`'
-hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
-hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
-hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
-hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
-hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
-hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
-inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
-link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
-fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`'
-always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
-export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
-exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
-include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
-prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
-file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
-variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
-need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
-need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
-version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
-runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
-shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
-shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
-libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
-library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
-soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
-install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
-postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
-postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
-finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
-finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
-hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
-sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
-hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
-enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
-enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
-enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
-old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
-striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
+macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
+enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
+host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
+host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
+host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
+build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
+build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
+build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
+SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
+Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
+GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
+EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
+FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
+LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
+NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
+LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
+exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
+AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
+GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
+SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
+ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
+need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
+LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
+libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
+version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
+striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
 
 LTCC='$LTCC'
 LTCFLAGS='$LTCFLAGS'
 compiler='$compiler_DEFAULT'
 
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$1
-_LTECHO_EOF'
-}
-
 # Quote evaled strings.
-for var in SHELL \
-ECHO \
-SED \
+for var in SED \
 GREP \
 EGREP \
 FGREP \
@@ -12723,6 +12598,8 @@ lt_cv_sys_global_symbol_pipe \
 lt_cv_sys_global_symbol_to_cdecl \
 lt_cv_sys_global_symbol_to_c_name_address \
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+SHELL \
+ECHO \
 lt_prog_compiler_no_builtin_flag \
 lt_prog_compiler_wl \
 lt_prog_compiler_pic \
@@ -12752,13 +12629,12 @@ variables_saved_for_relink \
 libname_spec \
 library_names_spec \
 soname_spec \
-install_override_mode \
 finish_eval \
 old_striplib \
 striplib; do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -12785,9 +12661,9 @@ postuninstall_cmds \
 finish_cmds \
 sys_lib_search_path_spec \
 sys_lib_dlsearch_path_spec; do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -12795,6 +12671,12 @@ sys_lib_dlsearch_path_spec; do
     esac
 done
 
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\$0 --fallback-echo"')  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
+  ;;
+esac
+
 ac_aux_dir='$ac_aux_dir'
 xsi_shell='$xsi_shell'
 lt_shell_append='$lt_shell_append'
@@ -12830,7 +12712,7 @@ do
     "libsysfs/Makefile") CONFIG_FILES="$CONFIG_FILES libsysfs/Makefile" ;;
     "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
 
-  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;;
   esac
 done
 
@@ -13146,7 +13028,7 @@ do
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
   esac
@@ -13174,7 +13056,7 @@ do
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;;
       esac
       case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
       as_fn_append ac_file_inputs " '$ac_f'"
@@ -13201,7 +13083,7 @@ $as_echo "$as_me: creating $ac_file" >&6;}
 
     case $ac_tag in
     *:-:* | *:-) cat >"$tmp/stdin" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5  ;;
     esac
     ;;
   esac
@@ -13537,8 +13419,7 @@ $as_echo X"$file" |
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-#                 Inc.
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 #   This file is part of GNU Libtool.
@@ -13586,12 +13467,6 @@ pic_mode=$pic_mode
 # Whether or not to optimize for fast installation.
 fast_install=$enable_fast_install
 
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# An echo program that protects backslashes.
-ECHO=$lt_ECHO
-
 # The host system.
 host_alias=$host_alias
 host=$host
@@ -13641,6 +13516,10 @@ SP2NL=$lt_lt_SP2NL
 # turn newlines into spaces.
 NL2SP=$lt_lt_NL2SP
 
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
 # An object symbol dumper.
 OBJDUMP=$lt_OBJDUMP
 
@@ -13662,9 +13541,6 @@ RANLIB=$lt_RANLIB
 old_postinstall_cmds=$lt_old_postinstall_cmds
 old_postuninstall_cmds=$lt_old_postuninstall_cmds
 
-# Whether to use a lock for old archive extraction.
-lock_old_archive_extraction=$lock_old_archive_extraction
-
 # A C compiler.
 LTCC=$lt_CC
 
@@ -13686,6 +13562,12 @@ global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name
 # The name of the directory that contains temporary libtool files.
 objdir=$objdir
 
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that does not interpret backslashes.
+ECHO=$lt_ECHO
+
 # Used to examine libraries when file_magic_cmd begins with "file".
 MAGIC_CMD=$MAGIC_CMD
 
@@ -13748,9 +13630,6 @@ library_names_spec=$lt_library_names_spec
 # The coded name of the library, if different from the real name.
 soname_spec=$lt_soname_spec
 
-# Permission mode override for installation of shared libraries.
-install_override_mode=$lt_install_override_mode
-
 # Command to use after installation of a shared archive.
 postinstall_cmds=$lt_postinstall_cmds
 
@@ -13790,10 +13669,6 @@ striplib=$lt_striplib
 # The linker used to build libraries.
 LD=$lt_LD
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
 # Commands used to build an old-style archive.
 old_archive_cmds=$lt_old_archive_cmds
 
@@ -14053,7 +13928,7 @@ _LT_EOF
 func_dirname ()
 {
   # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
   if test "X$func_dirname_result" = "X${1}"; then
     func_dirname_result="${3}"
   else
@@ -14064,7 +13939,7 @@ func_dirname ()
 # func_basename file
 func_basename ()
 {
-  func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
 }
 
 
@@ -14077,8 +13952,10 @@ func_basename ()
 func_stripname ()
 {
   case ${2} in
-    .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
   esac
 }
 
@@ -14089,20 +13966,20 @@ my_sed_long_arg='1s/^-[^=]*=//'
 # func_opt_split
 func_opt_split ()
 {
-  func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
 }
 
 # func_lo2o object
 func_lo2o ()
 {
-  func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
 }
 
 # func_xform libobj-or-source
 func_xform ()
 {
-  func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
 }
 
 # func_arith arithmetic-term...
diff --git a/libsysfs/Makefile.in b/libsysfs/Makefile.in
index dc561eb..d2c75a7 100644
--- a/libsysfs/Makefile.in
+++ b/libsysfs/Makefile.in
@@ -191,6 +191,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
diff --git a/ltmain.sh b/ltmain.sh
index d8efb57..7ed280b 100755
--- a/ltmain.sh
+++ b/ltmain.sh
@@ -1,10 +1,9 @@
 # Generated from ltmain.m4sh.
 
-# libtool (GNU libtool) 2.2.10
+# ltmain.sh (GNU libtool) 2.2.6b
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
@@ -33,54 +32,50 @@
 #
 # Provide generalized library-building support services.
 #
-#       --config             show all configuration variables
-#       --debug              enable verbose shell tracing
-#   -n, --dry-run            display commands without modifying any files
-#       --features           display basic configuration information and exit
-#       --mode=MODE          use operation mode MODE
-#       --preserve-dup-deps  don't remove duplicate dependency libraries
-#       --quiet, --silent    don't print informational messages
-#       --no-quiet, --no-silent
-#                            print informational messages (default)
-#       --tag=TAG            use configuration variables from tag TAG
-#   -v, --verbose            print more informational messages than default
-#       --no-verbose         don't print the extra informational messages
-#       --version            print version information
-#   -h, --help, --help-all   print short, long, or detailed help message
+#     --config             show all configuration variables
+#     --debug              enable verbose shell tracing
+# -n, --dry-run            display commands without modifying any files
+#     --features           display basic configuration information and exit
+#     --mode=MODE          use operation mode MODE
+#     --preserve-dup-deps  don't remove duplicate dependency libraries
+#     --quiet, --silent    don't print informational messages
+#     --tag=TAG            use configuration variables from tag TAG
+# -v, --verbose            print informational messages (default)
+#     --version            print version information
+# -h, --help               print short or long help message
 #
 # MODE must be one of the following:
 #
-#         clean              remove files from the build directory
-#         compile            compile a source file into a libtool object
-#         execute            automatically set library path, then run a program
-#         finish             complete the installation of libtool libraries
-#         install            install libraries or executables
-#         link               create a library or an executable
-#         uninstall          remove libraries from an installed directory
+#       clean              remove files from the build directory
+#       compile            compile a source file into a libtool object
+#       execute            automatically set library path, then run a program
+#       finish             complete the installation of libtool libraries
+#       install            install libraries or executables
+#       link               create a library or an executable
+#       uninstall          remove libraries from an installed directory
 #
-# MODE-ARGS vary depending on the MODE.  When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# MODE-ARGS vary depending on the MODE.
 # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
 #
 # When reporting a bug, please describe a test case to reproduce it and
 # include the following information:
 #
-#         host-triplet:	$host
-#         shell:		$SHELL
-#         compiler:		$LTCC
-#         compiler flags:		$LTCFLAGS
-#         linker:		$LD (gnu? $with_gnu_ld)
-#         $progname:	(GNU libtool) 2.2.10
-#         automake:	$automake_version
-#         autoconf:	$autoconf_version
+#       host-triplet:	$host
+#       shell:		$SHELL
+#       compiler:		$LTCC
+#       compiler flags:		$LTCFLAGS
+#       linker:		$LD (gnu? $with_gnu_ld)
+#       $progname:		(GNU libtool) 2.2.6b Debian-2.2.6b-2ubuntu1
+#       automake:		$automake_version
+#       autoconf:		$autoconf_version
 #
 # Report bugs to <bug-libtool@gnu.org>.
 
-PROGRAM=libtool
+PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION=2.2.10
+VERSION="2.2.6b Debian-2.2.6b-2ubuntu1"
 TIMESTAMP=""
-package_revision=1.3175
+package_revision=1.3017
 
 # Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -96,15 +91,10 @@ fi
 BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
 # NLS nuisances: We save the old values to restore during execute mode.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
 lt_user_locale=
 lt_safe_locale=
 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
@@ -117,24 +107,15 @@ do
 	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
 	fi"
 done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
 
 $lt_unset CDPATH
 
 
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
 
 
 
 : ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${ECHO="echo"}
 : ${EGREP="/bin/grep -E"}
 : ${FGREP="/bin/grep -F"}
 : ${GREP="/bin/grep"}
@@ -178,168 +159,32 @@ basename="s,^.*/,,"
 func_dirname_and_basename ()
 {
   # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
   if test "X$func_dirname_result" = "X${1}"; then
     func_dirname_result="${3}"
   else
     func_dirname_result="$func_dirname_result${2}"
   fi
-  func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
 }
 
 # Generated shell functions inserted here.
 
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
-		s@/\./@/@g
-		t dotsl
-		s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
-
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-#             value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
-  # Start from root dir and reassemble the path.
-  func_normal_abspath_result=
-  func_normal_abspath_tpath=$1
-  func_normal_abspath_altnamespace=
-  case $func_normal_abspath_tpath in
-    "")
-      # Empty path, that just means $cwd.
-      func_stripname '' '/' "`pwd`"
-      func_normal_abspath_result=$func_stripname_result
-      return
-    ;;
-    # The next three entries are used to spot a run of precisely
-    # two leading slashes without using negated character classes;
-    # we take advantage of case's first-match behaviour.
-    ///*)
-      # Unusual form of absolute path, do nothing.
-    ;;
-    //*)
-      # Not necessarily an ordinary path; POSIX reserves leading '//'
-      # and for example Cygwin uses it to access remote file shares
-      # over CIFS/SMB, so we conserve a leading double slash if found.
-      func_normal_abspath_altnamespace=/
-    ;;
-    /*)
-      # Absolute path, do nothing.
-    ;;
-    *)
-      # Relative path, prepend $cwd.
-      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
-    ;;
-  esac
-  # Cancel out all the simple stuff to save iterations.  We also want
-  # the path to end with a slash for ease of parsing, so make sure
-  # there is one (and only one) here.
-  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
-  while :; do
-    # Processed it all yet?
-    if test "$func_normal_abspath_tpath" = / ; then
-      # If we ascended to the root using ".." the result may be empty now.
-      if test -z "$func_normal_abspath_result" ; then
-        func_normal_abspath_result=/
-      fi
-      break
-    fi
-    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcar"`
-    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcdr"`
-    # Figure out what to do with it
-    case $func_normal_abspath_tcomponent in
-      "")
-        # Trailing empty path component, ignore it.
-      ;;
-      ..)
-        # Parent dir; strip last assembled component from result.
-        func_dirname "$func_normal_abspath_result"
-        func_normal_abspath_result=$func_dirname_result
-      ;;
-      *)
-        # Actual path component, append it.
-        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
-      ;;
-    esac
-  done
-  # Restore leading double-slash if one was found on entry.
-  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
-
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-#             value returned in "$func_relative_path_result"
-func_relative_path ()
-{
-  func_relative_path_result=
-  func_normal_abspath "$1"
-  func_relative_path_tlibdir=$func_normal_abspath_result
-  func_normal_abspath "$2"
-  func_relative_path_tbindir=$func_normal_abspath_result
-
-  # Ascend the tree starting from libdir
-  while :; do
-    # check if we have found a prefix of bindir
-    case $func_relative_path_tbindir in
-      $func_relative_path_tlibdir)
-        # found an exact match
-        func_relative_path_tcancelled=
-        break
-        ;;
-      $func_relative_path_tlibdir*)
-        # found a matching prefix
-        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
-        func_relative_path_tcancelled=$func_stripname_result
-        if test -z "$func_relative_path_result"; then
-          func_relative_path_result=.
-        fi
-        break
-        ;;
-      *)
-        func_dirname $func_relative_path_tlibdir
-        func_relative_path_tlibdir=${func_dirname_result}
-        if test "x$func_relative_path_tlibdir" = x ; then
-          # Have to descend all the way to the root!
-          func_relative_path_result=../$func_relative_path_result
-          func_relative_path_tcancelled=$func_relative_path_tbindir
-          break
-        fi
-        func_relative_path_result=../$func_relative_path_result
-        ;;
-    esac
-  done
-
-  # Now calculate path; take care to avoid doubling-up slashes.
-  func_stripname '' '/' "$func_relative_path_result"
-  func_relative_path_result=$func_stripname_result
-  func_stripname '/' '/' "$func_relative_path_tcancelled"
-  if test "x$func_stripname_result" != x ; then
-    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
-  fi
-
-  # Normalisation. If bindir is libdir, return empty string,
-  # else relative path ending with a slash; either way, target
-  # file name can be directly appended.
-  if test ! -z "$func_relative_path_result"; then
-    func_stripname './' '' "$func_relative_path_result/"
-    func_relative_path_result=$func_stripname_result
-  fi
-}
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
 
 # The name of this program:
+# In the unlikely event $progname began with a '-', it would play havoc with
+# func_echo (imagine progname=-n), so we prepend ./ in that case:
 func_dirname_and_basename "$progpath"
 progname=$func_basename_result
+case $progname in
+  -*) progname=./$progname ;;
+esac
 
 # Make sure we have an absolute path for reexecution:
 case $progpath in
@@ -413,13 +258,6 @@ func_verbose ()
     :
 }
 
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO "$*"
-}
-
 # func_error arg...
 # Echo program name prefixed message to standard error.
 func_error ()
@@ -488,9 +326,9 @@ func_mkdir_p ()
         case $my_directory_path in */*) ;; *) break ;; esac
 
         # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
       done
-      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
 
       save_mkdir_p_IFS="$IFS"; IFS=':'
       for my_dir in $my_dir_list; do
@@ -540,7 +378,7 @@ func_mktempdir ()
         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
     fi
 
-    $ECHO "$my_tmpdir"
+    $ECHO "X$my_tmpdir" | $Xsed
 }
 
 
@@ -554,7 +392,7 @@ func_quote_for_eval ()
 {
     case $1 in
       *[\\\`\"\$]*)
-	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
       *)
         func_quote_for_eval_unquoted_result="$1" ;;
     esac
@@ -581,7 +419,7 @@ func_quote_for_expand ()
 {
     case $1 in
       *[\\\`\"]*)
-	my_arg=`$ECHO "$1" | $SED \
+	my_arg=`$ECHO "X$1" | $Xsed \
 	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
       *)
         my_arg="$1" ;;
@@ -651,19 +489,14 @@ func_show_eval_locale ()
 }
 
 
+
+
+
 # func_version
 # Echo version message to standard output and exit.
 func_version ()
 {
-    $SED -n '/(C)/!b go
-	:more
-	/\./!{
-	  N
-	  s/\n# / /
-	  b more
-	}
-	:go
-	/^# '$PROGRAM' (GNU /,/# warranty; / {
+    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
         s/^# //
 	s/^# *$//
         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
@@ -676,20 +509,19 @@ func_version ()
 # Echo short help message to standard output and exit.
 func_usage ()
 {
-    $SED -n '/^# Usage:/,/^#  *.*--help/ {
+    $SED -n '/^# Usage:/,/# -h/ {
         s/^# //
 	s/^# *$//
 	s/\$progname/'$progname'/
 	p
     }' < "$progpath"
-    echo
+    $ECHO
     $ECHO "run \`$progname --help | more' for full usage"
     exit $?
 }
 
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
+# func_help
+# Echo long help message to standard output and exit.
 func_help ()
 {
     $SED -n '/^# Usage:/,/# Report bugs to/ {
@@ -706,10 +538,7 @@ func_help ()
 	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
 	p
      }' < "$progpath"
-    ret=$?
-    if test -z "$1"; then
-      exit $ret
-    fi
+    exit $?
 }
 
 # func_missing_arg argname
@@ -717,7 +546,7 @@ func_help ()
 # exit_cmd.
 func_missing_arg ()
 {
-    func_error "missing argument for $1."
+    func_error "missing argument for $1"
     exit_cmd=exit
 }
 
@@ -727,6 +556,29 @@ exit_cmd=:
 
 
 
+# Check that we have a working $ECHO.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+  # Yippee, $ECHO works!
+  :
+else
+  # Restart under the correct shell, and then maybe $ECHO will work.
+  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit $EXIT_SUCCESS
+fi
 
 magic="%%%MAGIC variable%%%"
 magic_exe="%%%MAGIC EXE variable%%%"
@@ -784,16 +636,16 @@ func_config ()
 # Display the features supported by this script.
 func_features ()
 {
-    echo "host: $host"
+    $ECHO "host: $host"
     if test "$build_libtool_libs" = yes; then
-      echo "enable shared libraries"
+      $ECHO "enable shared libraries"
     else
-      echo "disable shared libraries"
+      $ECHO "disable shared libraries"
     fi
     if test "$build_old_libs" = yes; then
-      echo "enable static libraries"
+      $ECHO "enable static libraries"
     else
-      echo "disable static libraries"
+      $ECHO "disable static libraries"
     fi
 
     exit $?
@@ -920,21 +772,10 @@ func_enable_tag ()
 
       --quiet|--silent)	preserve_args="$preserve_args $opt"
 			opt_silent=:
-			opt_verbose=false
-			;;
-
-      --no-quiet|--no-silent)
-			preserve_args="$preserve_args $opt"
-			opt_silent=false
 			;;
 
       --verbose| -v)	preserve_args="$preserve_args $opt"
 			opt_silent=false
-			opt_verbose=:
-			;;
-
-      --no-verbose)	preserve_args="$preserve_args $opt"
-			opt_verbose=false
 			;;
 
       --tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break
@@ -952,7 +793,6 @@ func_enable_tag ()
 
       -\?|-h)		func_usage					;;
       --help)		opt_help=:					;;
-      --help-all)	opt_help=': help-all'				;;
       --version)	func_version					;;
 
       -*)		func_fatal_help "unrecognized option \`$opt'"	;;
@@ -1176,13 +1016,10 @@ func_infer_tag ()
         func_quote_for_eval "$arg"
 	CC_quoted="$CC_quoted $func_quote_for_eval_result"
       done
-      CC_expanded=`func_echo_all $CC`
-      CC_quoted_expanded=`func_echo_all $CC_quoted`
       case $@ in
       # Blanks in the command may have been stripped by the calling shell,
       # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
-      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
       # Blanks at the start of $base_compile will cause this to fail
       # if we don't check for them as well.
       *)
@@ -1196,11 +1033,8 @@ func_infer_tag ()
 	      func_quote_for_eval "$arg"
 	      CC_quoted="$CC_quoted $func_quote_for_eval_result"
 	    done
-	    CC_expanded=`func_echo_all $CC`
-	    CC_quoted_expanded=`func_echo_all $CC_quoted`
 	    case "$@ " in
-	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
-	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
 	      # The compiler in the base compile command matches
 	      # the one in the tagged configuration.
 	      # Assume this is the tagged configuration we want.
@@ -1379,7 +1213,7 @@ func_mode_compile ()
     *.[cCFSifmso] | \
     *.ada | *.adb | *.ads | *.asm | \
     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-    *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
+    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
       func_xform "$libobj"
       libobj=$func_xform_result
       ;;
@@ -1454,7 +1288,7 @@ func_mode_compile ()
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
     if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
     else
       output_obj=
@@ -1611,7 +1445,7 @@ compiler."
 }
 
 $opt_help || {
-  test "$mode" = compile && func_mode_compile ${1+"$@"}
+test "$mode" = compile && func_mode_compile ${1+"$@"}
 }
 
 func_mode_help ()
@@ -1648,11 +1482,10 @@ This mode accepts the following additional options:
 
   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
   -no-suppress      do not suppress compiler output for multiple passes
-  -prefer-pic       try to build PIC objects only
-  -prefer-non-pic   try to build non-PIC objects only
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
   -shared           do not build a \`.o' file suitable for static linking
   -static           only build a \`.o' file suitable for static linking
-  -Wc,FLAG          pass FLAG directly to the compiler
 
 COMPILE-COMMAND is a command to be used in creating a \`standard' object file
 from the given SOURCEFILE.
@@ -1705,7 +1538,7 @@ either the \`install' or \`cp' program.
 
 The following components of INSTALL-COMMAND are treated specially:
 
-  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
 
 The rest of the components are interpreted as arguments to that command (only
 BSD-compatible install options are recognized)."
@@ -1725,8 +1558,6 @@ The following components of LINK-COMMAND are treated specially:
 
   -all-static       do not do any dynamic linking at all
   -avoid-version    do not add a version suffix if possible
-  -bindir BINDIR    specify path to binaries directory (for systems where
-                    libraries must be found in the PATH setting at runtime)
   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
@@ -1755,11 +1586,6 @@ The following components of LINK-COMMAND are treated specially:
   -version-info CURRENT[:REVISION[:AGE]]
                     specify library version info [each variable defaults to 0]
   -weak LIBNAME     declare that the target provides the LIBNAME interface
-  -Wc,FLAG
-  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
-  -Wl,FLAG
-  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
-  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
 
 All other options (arguments beginning with \`-') are ignored.
 
@@ -1797,40 +1623,14 @@ Otherwise, only FILE itself is deleted using RM."
         ;;
     esac
 
-    echo
+    $ECHO
     $ECHO "Try \`$progname --help' for more information about other modes."
+
+    exit $?
 }
 
-# Now that we've collected a possible --mode arg, show help if necessary
-if $opt_help; then
-  if test "$opt_help" = :; then
-    func_mode_help
-  else
-    {
-      func_help noexit
-      for mode in compile link execute install finish uninstall clean; do
-	func_mode_help
-      done
-    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
-    {
-      func_help noexit
-      for mode in compile link execute install finish uninstall clean; do
-	echo
-	func_mode_help
-      done
-    } |
-    sed '1d
-      /^When reporting/,/^Report/{
-	H
-	d
-      }
-      $x
-      /information about other modes/d
-      /more detailed .*MODE/d
-      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
-  fi
-  exit $?
-fi
+  # Now that we've collected a possible --mode arg, show help if necessary
+  $opt_help && func_mode_help
 
 
 # func_mode_execute arg...
@@ -1912,7 +1712,7 @@ func_mode_execute ()
     for file
     do
       case $file in
-      -* | *.la | *.lo ) ;;
+      -*) ;;
       *)
 	# Do a test to see if this is really a libtool program.
 	if func_ltwrapper_script_p "$file"; then
@@ -1954,7 +1754,7 @@ func_mode_execute ()
       # Display what would be done.
       if test -n "$shlibpath_var"; then
 	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-	echo "export $shlibpath_var"
+	$ECHO "export $shlibpath_var"
       fi
       $ECHO "$cmd$args"
       exit $EXIT_SUCCESS
@@ -1995,23 +1795,23 @@ func_mode_finish ()
     # Exit here if they wanted silent mode.
     $opt_silent && exit $EXIT_SUCCESS
 
-    echo "----------------------------------------------------------------------"
-    echo "Libraries have been installed in:"
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
+    $ECHO "Libraries have been installed in:"
     for libdir in $libdirs; do
       $ECHO "   $libdir"
     done
-    echo
-    echo "If you ever happen to want to link against installed libraries"
-    echo "in a given directory, LIBDIR, you must either use libtool, and"
-    echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    echo "flag during linking and do at least one of the following:"
+    $ECHO
+    $ECHO "If you ever happen to want to link against installed libraries"
+    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $ECHO "flag during linking and do at least one of the following:"
     if test -n "$shlibpath_var"; then
-      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      echo "     during execution"
+      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $ECHO "     during execution"
     fi
     if test -n "$runpath_var"; then
-      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      echo "     during linking"
+      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $ECHO "     during linking"
     fi
     if test -n "$hardcode_libdir_flag_spec"; then
       libdir=LIBDIR
@@ -2023,21 +1823,21 @@ func_mode_finish ()
       $ECHO "   - have your system administrator run these commands:$admincmds"
     fi
     if test -f /etc/ld.so.conf; then
-      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
     fi
-    echo
+    $ECHO
 
-    echo "See any operating system documentation about shared libraries for"
+    $ECHO "See any operating system documentation about shared libraries for"
     case $host in
       solaris2.[6789]|solaris2.1[0-9])
-        echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
-	echo "pages."
+        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	$ECHO "pages."
 	;;
       *)
-        echo "more information, such as the ld(1) and ld.so(8) manual pages."
+        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
         ;;
     esac
-    echo "----------------------------------------------------------------------"
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
     exit $EXIT_SUCCESS
 }
 
@@ -2052,7 +1852,7 @@ func_mode_install ()
     # install_prog (especially on Windows NT).
     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        # Allow the use of GNU shtool's install command.
-       case $nonopt in *shtool*) :;; *) false;; esac; then
+       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
       # Aesthetically quote it.
       func_quote_for_eval "$nonopt"
       install_prog="$func_quote_for_eval_result "
@@ -2067,11 +1867,6 @@ func_mode_install ()
     # Aesthetically quote it.
     func_quote_for_eval "$arg"
     install_prog="$install_prog$func_quote_for_eval_result"
-    install_shared_prog=$install_prog
-    case " $install_prog " in
-      *[\\\ /]cp\ *) install_cp=: ;;
-      *) install_cp=false ;;
-    esac
 
     # We need to accept at least all the BSD install flags.
     dest=
@@ -2081,10 +1876,8 @@ func_mode_install ()
     install_type=
     isdir=no
     stripme=
-    no_mode=:
     for arg
     do
-      arg2=
       if test -n "$dest"; then
 	files="$files $dest"
 	dest=$arg
@@ -2094,9 +1887,10 @@ func_mode_install ()
       case $arg in
       -d) isdir=yes ;;
       -f)
-	if $install_cp; then :; else
-	  prev=$arg
-	fi
+	case " $install_prog " in
+	*[\\\ /]cp\ *) ;;
+	*) prev=$arg ;;
+	esac
 	;;
       -g | -m | -o)
 	prev=$arg
@@ -2110,10 +1904,6 @@ func_mode_install ()
       *)
 	# If the previous option needed an argument, then skip it.
 	if test -n "$prev"; then
-	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
-	    arg2=$install_override_mode
-	    no_mode=false
-	  fi
 	  prev=
 	else
 	  dest=$arg
@@ -2125,10 +1915,6 @@ func_mode_install ()
       # Aesthetically quote the argument.
       func_quote_for_eval "$arg"
       install_prog="$install_prog $func_quote_for_eval_result"
-      if test -n "$arg2"; then
-	func_quote_for_eval "$arg2"
-      fi
-      install_shared_prog="$install_shared_prog $func_quote_for_eval_result"
     done
 
     test -z "$install_prog" && \
@@ -2137,13 +1923,6 @@ func_mode_install ()
     test -n "$prev" && \
       func_fatal_help "the \`$prev' option requires an argument"
 
-    if test -n "$install_override_mode" && $no_mode; then
-      if $install_cp; then :; else
-	func_quote_for_eval "$install_override_mode"
-	install_shared_prog="$install_shared_prog -m $func_quote_for_eval_result"
-      fi
-    fi
-
     if test -z "$files"; then
       if test -z "$dest"; then
 	func_fatal_help "no file or destination specified"
@@ -2231,7 +2010,7 @@ func_mode_install ()
 
 	if test -n "$relink_command"; then
 	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
 
 	  # Don't allow the user to place us outside of our expected
 	  # location b/c this prevents finding dependent libraries that
@@ -2244,9 +2023,9 @@ func_mode_install ()
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
 	  else
-	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
 	  fi
 
 	  func_warning "relinking \`$file'"
@@ -2264,7 +2043,7 @@ func_mode_install ()
 	  test -n "$relink_command" && srcname="$realname"T
 
 	  # Install the shared library and build the symlinks.
-	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+	  func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
 	      'exit $?'
 	  tstripme="$stripme"
 	  case $host_os in
@@ -2404,7 +2183,7 @@ func_mode_install ()
 	    if test -f "$lib"; then
 	      func_source "$lib"
 	    fi
-	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
 	    if test -n "$libdir" && test ! -f "$libfile"; then
 	      func_warning "\`$lib' has not been installed in \`$libdir'"
 	      finalize=no
@@ -2423,7 +2202,7 @@ func_mode_install ()
 		file="$func_basename_result"
 	        outputname="$tmpdir/$file"
 	        # Replace the output file specification.
-	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
 
 	        $opt_silent || {
 	          func_quote_for_expand "$relink_command"
@@ -2442,7 +2221,7 @@ func_mode_install ()
 	    }
 	  else
 	    # Install the binary that we compiled earlier.
-	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
 	  fi
 	fi
 
@@ -2544,10 +2323,6 @@ func_generate_dlsyms ()
 extern \"C\" {
 #endif
 
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
-#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
-#endif
-
 /* External symbol declarations for the compiler. */\
 "
 
@@ -2557,7 +2332,7 @@ extern \"C\" {
 	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
 	  # Add our own program objects to the symbol list.
-	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 	  for progfile in $progfiles; do
 	    func_verbose "extracting global C symbols from \`$progfile'"
 	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
@@ -2596,7 +2371,7 @@ extern \"C\" {
 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	      case $host in
-	        *cygwin* | *mingw* | *cegcc* )
+	        *cygwin | *mingw* | *cegcc* )
 	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
 	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
 	          ;;
@@ -2640,10 +2415,10 @@ extern \"C\" {
 	  if test -f "$nlist"S; then
 	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
 	  else
-	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
 	  fi
 
-	  echo >> "$output_objdir/$my_dlsyms" "\
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
 
 /* The mapping between symbol names and symbols.  */
 typedef struct {
@@ -2653,7 +2428,7 @@ typedef struct {
 "
 	  case $host in
 	  *cygwin* | *mingw* | *cegcc* )
-	    echo >> "$output_objdir/$my_dlsyms" "\
+	    $ECHO >> "$output_objdir/$my_dlsyms" "\
 /* DATA imports from DLLs on WIN32 con't be const, because
    runtime relocations are performed -- see ld's documentation
    on pseudo-relocs.  */"
@@ -2666,7 +2441,7 @@ typedef struct {
 	    lt_dlsym_const=const ;;
 	  esac
 
-	  echo >> "$output_objdir/$my_dlsyms" "\
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
 extern $lt_dlsym_const lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[];
 $lt_dlsym_const lt_dlsymlist
@@ -2682,7 +2457,7 @@ lt_${my_prefix}_LTX_preloaded_symbols[] =
 	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
 	    ;;
 	  esac
-	  echo >> "$output_objdir/$my_dlsyms" "\
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
   {0, (void *) 0}
 };
 
@@ -2740,16 +2515,16 @@ static const void *lt_preloaded_setup() {
 	case $host in
 	*cygwin* | *mingw* | *cegcc* )
 	  if test -f "$output_objdir/$my_outputname.def"; then
-	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
 	  else
-	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
 	  fi
 	  ;;
 	*)
-	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
 	  ;;
 	esac
 	;;
@@ -2763,8 +2538,8 @@ static const void *lt_preloaded_setup() {
       # really was required.
 
       # Nullify the symbol file.
-      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
-      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
     fi
 }
 
@@ -2774,7 +2549,6 @@ static const void *lt_preloaded_setup() {
 # Need a lot of goo to handle *both* DLLs and import libs
 # Has to be a shell function in order to 'eat' the argument
 # that is supplied when $file_magic_command is called.
-# Despite the name, also deal with 64 bit binaries.
 func_win32_libid ()
 {
   $opt_debug
@@ -2785,9 +2559,8 @@ func_win32_libid ()
     win32_libid_type="x86 archive import"
     ;;
   *ar\ archive*) # could be an import, or static
-    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
       win32_nmres=`eval $NM -f posix -A $1 |
 	$SED -n -e '
 	    1,100{
@@ -2825,18 +2598,7 @@ func_extract_an_archive ()
     $opt_debug
     f_ex_an_ar_dir="$1"; shift
     f_ex_an_ar_oldlib="$1"
-    if test "$lock_old_archive_extraction" = yes; then
-      lockfile=$f_ex_an_ar_oldlib.lock
-      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
-	func_echo "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    fi
-    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
-		   'stat=$?; rm -f "$lockfile"; exit $stat'
-    if test "$lock_old_archive_extraction" = yes; then
-      $opt_dry_run || rm -f "$lockfile"
-    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
      :
     else
@@ -2907,7 +2669,7 @@ func_extract_archives ()
 	    darwin_file=
 	    darwin_files=
 	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
 	      $LIPO -create -output "$darwin_file" $darwin_files
 	    done # $darwin_filelist
 	    $RM -rf unfat-$$
@@ -2922,30 +2684,25 @@ func_extract_archives ()
         func_extract_an_archive "$my_xdir" "$my_xabs"
 	;;
       esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
     done
 
     func_extract_archives_result="$my_oldobjs"
 }
 
 
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable.  Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
+
+# func_emit_wrapper_part1 [arg=no]
 #
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory.  This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
 {
-	func_emit_wrapper_arg1=${1-no}
+	func_emit_wrapper_part1_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part1_arg1=$1
+	fi
 
 	$ECHO "\
 #! $SHELL
@@ -2961,6 +2718,7 @@ func_emit_wrapper ()
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
 sed_quote_subst='$sed_quote_subst'
 
 # Be Bourne compatible
@@ -2991,132 +2749,31 @@ if test \"\$libtool_install_magic\" = \"$magic\"; then
 else
   # When we are sourced in execute mode, \$file and \$ECHO are already set.
   if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    file=\"\$0\""
-
-    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
-    $ECHO "\
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$1
-_LTECHO_EOF'
-}
-    ECHO=\"$qECHO\"
-  fi
-
-# Very basic option parsing. These options are (a) specific to
-# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
-# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
-# this pattern).
-#
-# There are only two supported options: --lt-debug and
-# --lt-dump-script. There is, deliberately, no --lt-help.
-#
-# The first argument to this parsing function should be the
-# script's $0 value, followed by "$@".
-lt_option_debug=
-func_parse_lt_options ()
-{
-  lt_script_arg0=\$0
-  shift
-  for lt_opt
-  do
-    case \"\$lt_opt\" in
-    --lt-debug) lt_option_debug=1 ;;
-    --lt-dump-script)
-        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
-        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
-        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
-        cat \"\$lt_dump_D/\$lt_dump_F\"
-        exit 0
-      ;;
-    --lt-*)
-        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
-        exit 1
-      ;;
-    esac
-  done
-
-  # Print the debug banner immediately:
-  if test -n \"\$lt_option_debug\"; then
-    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
-  fi
-}
-
-# Used when --lt-debug. Prints its arguments to stdout
-# (redirection is the responsibility of the caller)
-func_lt_dump_args ()
-{
-  lt_dump_args_N=1;
-  for lt_arg
-  do
-    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
-    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
-  done
-}
-
-# Core function for launching the target application
-func_exec_program_core ()
-{
-"
-  case $host in
-  # Backslashes separate directories on plain windows
-  *-*-mingw | *-*-os2* | *-cegcc*)
-    $ECHO "\
-      if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
-        func_lt_dump_args \${1+\"\$@\"} 1>&2
-      fi
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-    ;;
-
-  *)
-    $ECHO "\
-      if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
-        func_lt_dump_args \${1+\"\$@\"} 1>&2
-      fi
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+    ECHO=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$ECHO will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
 "
-    ;;
-  esac
-  $ECHO "\
-      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
-      exit 1
-}
-
-# A function to encapsulate launching the target application
-# Strips options in the --lt-* namespace from \$@ and
-# launches target application with the remaining arguments.
-func_exec_program ()
-{
-  for lt_wr_arg
-  do
-    case \$lt_wr_arg in
-    --lt-*) ;;
-    *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
-    esac
-    shift
-  done
-  func_exec_program_core \${1+\"\$@\"}
-}
-
-  # Parse options
-  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+	$ECHO "\
 
   # Find the directory that this script lives in.
-  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
   # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
   while test -n \"\$file\"; do
-    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
 
     # If there was a directory component, then change thisdir.
     if test \"x\$destdir\" != \"x\$file\"; then
@@ -3126,13 +2783,30 @@ func_exec_program ()
       esac
     fi
 
-    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
   done
+"
+}
+# end: func_emit_wrapper_part1
+
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+	func_emit_wrapper_part2_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part2_arg1=$1
+	fi
+
+	$ECHO "\
 
   # Usually 'no', except on cygwin/mingw when embedded into
   # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
     # special case for '.'
     if test \"\$thisdir\" = \".\"; then
@@ -3140,7 +2814,7 @@ func_exec_program ()
     fi
     # remove .libs from thisdir
     case \"\$thisdir\" in
-    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
     $objdir )   thisdir=. ;;
     esac
   fi
@@ -3203,7 +2877,7 @@ func_exec_program ()
 
     # Some systems cannot cope with colon-terminated $shlibpath_var
     # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
 
     export $shlibpath_var
 "
@@ -3220,18 +2894,64 @@ func_exec_program ()
 	$ECHO "\
     if test \"\$libtool_execute_magic\" != \"$magic\"; then
       # Run the actual program with our arguments.
-      func_exec_program \${1+\"\$@\"}
+"
+	case $host in
+	# Backslashes separate directories on plain windows
+	*-*-mingw | *-*-os2* | *-cegcc*)
+	  $ECHO "\
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+	  ;;
+
+	*)
+	  $ECHO "\
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
     fi
   else
     # The program doesn't exist.
     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
-    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
     exit 1
   fi
 fi\
 "
 }
+# end: func_emit_wrapper_part2
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_arg1=$1
+	fi
+
+	# split this up so that func_emit_cwrapperexe_src
+	# can call each part independently.
+	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
 
 
 # func_to_host_path arg
@@ -3258,19 +2978,23 @@ fi\
 func_to_host_path ()
 {
   func_to_host_path_result="$1"
-  if test -n "$1"; then
+  if test -n "$1" ; then
     case $host in
       *mingw* )
         lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
         case $build in
           *mingw* ) # actually, msys
             # awkward: cmd appends spaces to result
-            func_to_host_path_result=`( cmd //c echo "$1" ) 2>/dev/null |
-              $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
             ;;
           *cygwin* )
-            func_to_host_path_result=`cygpath -w "$1" |
-	      $SED -e "$lt_sed_naive_backslashify"`
+            func_to_host_path_tmp1=`cygpath -w "$1"`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
             ;;
           * )
             # Unfortunately, winepath does not exit with a non-zero
@@ -3282,17 +3006,17 @@ func_to_host_path ()
             # the odd construction:
             func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
             if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
-              func_to_host_path_result=`$ECHO "$func_to_host_path_tmp1" |
+              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
                 $SED -e "$lt_sed_naive_backslashify"`
             else
               # Allow warning below.
-              func_to_host_path_result=
+              func_to_host_path_result=""
             fi
             ;;
         esac
         if test -z "$func_to_host_path_result" ; then
           func_error "Could not determine host path corresponding to"
-          func_error "  \`$1'"
+          func_error "  '$1'"
           func_error "Continuing, but uninstalled executables may not work."
           # Fallback:
           func_to_host_path_result="$1"
@@ -3325,24 +3049,30 @@ func_to_host_path ()
 func_to_host_pathlist ()
 {
   func_to_host_pathlist_result="$1"
-  if test -n "$1"; then
+  if test -n "$1" ; then
     case $host in
       *mingw* )
         lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
         # Remove leading and trailing path separator characters from
         # ARG. msys behavior is inconsistent here, cygpath turns them
         # into '.;' and ';.', and winepath ignores them completely.
-	func_stripname : : "$1"
-        func_to_host_pathlist_tmp1=$func_stripname_result
+        func_to_host_pathlist_tmp2="$1"
+        # Once set for this call, this variable should not be
+        # reassigned. It is used in tha fallback case.
+        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+          $SED -e 's|^:*||' -e 's|:*$||'`
         case $build in
           *mingw* ) # Actually, msys.
             # Awkward: cmd appends spaces to result.
-            func_to_host_pathlist_result=`
-	      ( cmd //c echo "$func_to_host_pathlist_tmp1" ) 2>/dev/null |
-	      $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
             ;;
           *cygwin* )
-            func_to_host_pathlist_result=`cygpath -w -p "$func_to_host_pathlist_tmp1" |
+            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
               $SED -e "$lt_sed_naive_backslashify"`
             ;;
           * )
@@ -3358,17 +3088,18 @@ func_to_host_pathlist ()
                   if test -z "$func_to_host_pathlist_result" ; then
                     func_to_host_pathlist_result="$func_to_host_path_result"
                   else
-                    func_append func_to_host_pathlist_result ";$func_to_host_path_result"
+                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
                   fi
                 fi
               fi
+              IFS=:
             done
             IFS=$func_to_host_pathlist_oldIFS
             ;;
         esac
-        if test -z "$func_to_host_pathlist_result"; then
+        if test -z "$func_to_host_pathlist_result" ; then
           func_error "Could not determine the host path(s) corresponding to"
-          func_error "  \`$1'"
+          func_error "  '$1'"
           func_error "Continuing, but uninstalled executables may not work."
           # Fallback. This may break if $1 contains DOS-style drive
           # specifications. The fix is not to complicate the expression
@@ -3385,7 +3116,7 @@ func_to_host_pathlist ()
             ;;
         esac
         case "$1" in
-          *: ) func_append func_to_host_pathlist_result ";"
+          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
             ;;
         esac
         ;;
@@ -3410,23 +3141,31 @@ func_emit_cwrapperexe_src ()
 
    This wrapper executable should never be moved out of the build directory.
    If it is, it will not operate correctly.
+
+   Currently, it simply execs the wrapper *script* "$SHELL $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
 */
 EOF
 	    cat <<"EOF"
-#ifdef _MSC_VER
-# define _CRT_SECURE_NO_DEPRECATE 1
-#endif
 #include <stdio.h>
 #include <stdlib.h>
 #ifdef _MSC_VER
 # include <direct.h>
 # include <process.h>
 # include <io.h>
+# define setmode _setmode
 #else
 # include <unistd.h>
 # include <stdint.h>
 # ifdef __CYGWIN__
 #  include <io.h>
+#  define HAVE_SETENV
+#  ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+#  endif
 # endif
 #endif
 #include <malloc.h>
@@ -3438,44 +3177,6 @@ EOF
 #include <fcntl.h>
 #include <sys/stat.h>
 
-/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
-# ifdef __STRICT_ANSI__
-int _putenv (const char *);
-# endif
-#elif defined(__CYGWIN__)
-# ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-# endif
-/* #elif defined (other platforms) ... */
-#endif
-
-/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
-# define setmode _setmode
-# define stat    _stat
-# define chmod   _chmod
-# define getcwd  _getcwd
-# define putenv  _putenv
-# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-#  define _INTPTR_T_DEFINED
-#  define intptr_t int
-# endif
-#elif defined(__MINGW32__)
-# define setmode _setmode
-# define stat    _stat
-# define chmod   _chmod
-# define getcwd  _getcwd
-# define putenv  _putenv
-#elif defined(__CYGWIN__)
-# define HAVE_SETENV
-# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
-#endif
-
 #if defined(PATH_MAX)
 # define LT_PATHMAX PATH_MAX
 #elif defined(MAXPATHLEN)
@@ -3491,7 +3192,14 @@ int setenv (const char *, const char *, int);
 # define S_IXGRP 0
 #endif
 
-/* path handling portability macros */
+#ifdef _MSC_VER
+# define S_IXUSR _S_IEXEC
+# define stat _stat
+# ifndef _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#endif
+
 #ifndef DIR_SEPARATOR
 # define DIR_SEPARATOR '/'
 # define PATH_SEPARATOR ':'
@@ -3522,6 +3230,10 @@ int setenv (const char *, const char *, int);
 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
 #endif /* PATH_SEPARATOR_2 */
 
+#ifdef __CYGWIN__
+# define FOPEN_WB "wb"
+#endif
+
 #ifndef FOPEN_WB
 # define FOPEN_WB "w"
 #endif
@@ -3534,13 +3246,22 @@ int setenv (const char *, const char *, int);
   if (stale) { free ((void *) stale); stale = 0; } \
 } while (0)
 
-#if defined(LT_DEBUGWRAPPER)
-static int lt_debug = 1;
+#undef LTWRAPPER_DEBUGPRINTF
+#if defined DEBUGWRAPPER
+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+static void
+ltwrapper_debugprintf (const char *fmt, ...)
+{
+    va_list args;
+    va_start (args, fmt);
+    (void) vfprintf (stderr, fmt, args);
+    va_end (args);
+}
 #else
-static int lt_debug = 0;
+# define LTWRAPPER_DEBUGPRINTF(args)
 #endif
 
-const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+const char *program_name = NULL;
 
 void *xmalloc (size_t num);
 char *xstrdup (const char *string);
@@ -3550,17 +3271,31 @@ char *chase_symlinks (const char *pathspec);
 int make_executable (const char *path);
 int check_executable (const char *path);
 char *strendzap (char *str, const char *pat);
-void lt_debugprintf (const char *file, int line, const char *fmt, ...);
-void lt_fatal (const char *file, int line, const char *message, ...);
-static const char *nonnull (const char *s);
-static const char *nonempty (const char *s);
+void lt_fatal (const char *message, ...);
 void lt_setenv (const char *name, const char *value);
 char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
 void lt_update_exe_path (const char *name, const char *value);
 void lt_update_lib_path (const char *name, const char *value);
-char **prepare_spawn (char **argv);
-void lt_dump_script (FILE *f);
+
+static const char *script_text_part1 =
+EOF
+
+	    func_emit_wrapper_part1 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
+	    cat <<EOF
+
+static const char *script_text_part2 =
 EOF
+	    func_emit_wrapper_part2 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
 
 	    cat <<EOF
 const char * MAGIC_EXE = "$magic_exe";
@@ -3605,10 +3340,24 @@ EOF
 	    cat <<"EOF"
 
 #define LTWRAPPER_OPTION_PREFIX         "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
 
+static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
 static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+
 static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
-static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
+  /* argument is putenv-style "foo=bar", value of foo is set to bar */
+
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
+  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+
+static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
+  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
 
 int
 main (int argc, char *argv[])
@@ -3625,13 +3374,10 @@ main (int argc, char *argv[])
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));
-  newargz = XMALLOC (char *, argc + 1);
+  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
+  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
 
-  /* very simple arg parsing; don't want to rely on getopt
-   * also, copy all non cwrapper options to newargz, except
-   * argz[0], which is handled differently
-   */
-  newargc=0;
+  /* very simple arg parsing; don't want to rely on getopt */
   for (i = 1; i < argc; i++)
     {
       if (strcmp (argv[i], dumpscript_opt) == 0)
@@ -3645,57 +3391,25 @@ EOF
 	      esac
 
 	    cat <<"EOF"
-	  lt_dump_script (stdout);
+	  printf ("%s", script_text_part1);
+	  printf ("%s", script_text_part2);
 	  return 0;
 	}
-      if (strcmp (argv[i], debug_opt) == 0)
-	{
-          lt_debug = 1;
-          continue;
-	}
-      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
-        {
-          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-             namespace, but it is not one of the ones we know about and
-             have already dealt with, above (inluding dump-script), then
-             report an error. Otherwise, targets might begin to believe
-             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-             namespace. The first time any user complains about this, we'll
-             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-             or a configure.ac-settable value.
-           */
-          lt_fatal (__FILE__, __LINE__,
-		    "unrecognized %s option: '%s'",
-                    ltwrapper_option_prefix, argv[i]);
-        }
-      /* otherwise ... */
-      newargz[++newargc] = xstrdup (argv[i]);
     }
-  newargz[++newargc] = NULL;
-
-EOF
-	    cat <<EOF
-  /* The GNU banner must be the first non-error debug message */
-  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
-EOF
-	    cat <<"EOF"
-  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
-  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
 
+  newargz = XMALLOC (char *, argc + 1);
   tmp_pathspec = find_executable (argv[0]);
   if (tmp_pathspec == NULL)
-    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(main) found exe (before symlink chase) at: %s\n",
-		  tmp_pathspec);
+    lt_fatal ("Couldn't find %s", argv[0]);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+			  tmp_pathspec));
 
   actual_cwrapper_path = chase_symlinks (tmp_pathspec);
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(main) found exe (after symlink chase) at: %s\n",
-		  actual_cwrapper_path);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+			  actual_cwrapper_path));
   XFREE (tmp_pathspec);
 
-  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
   strendzap (actual_cwrapper_path, actual_cwrapper_name);
 
   /* wrapper name transforms */
@@ -3713,9 +3427,8 @@ EOF
   target_name = tmp_pathspec;
   tmp_pathspec = 0;
 
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(main) libtool target name: %s\n",
-		  target_name);
+  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+			  target_name));
 EOF
 
 	    cat <<EOF
@@ -3768,12 +3481,77 @@ EOF
   lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
   lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
 
-  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
-		  nonnull (lt_argv_zero));
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+        {
+          if (argv[i][env_set_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_set_opt_len + 1;
+              lt_opt_process_env_set (p);
+            }
+          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_set (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_set_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+        {
+          if (argv[i][env_prepend_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_prepend_opt_len + 1;
+              lt_opt_process_env_prepend (p);
+            }
+          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_prepend_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+        {
+          if (argv[i][env_append_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_append_opt_len + 1;
+              lt_opt_process_env_append (p);
+            }
+          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_append (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_append_opt);
+          continue;
+        }
+      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal ("Unrecognized option in %s namespace: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
   for (i = 0; i < newargc; i++)
     {
-      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
-		      i, nonnull (newargz[i]));
+      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
     }
 
 EOF
@@ -3782,14 +3560,11 @@ EOF
 	      mingw*)
 		cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */
-  newargz = prepare_spawn (newargz);
   rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */
-      lt_debugprintf (__FILE__, __LINE__,
-		      "(main) failed to launch target \"%s\": %s\n",
-		      lt_argv_zero, nonnull (strerror (errno)));
+      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
       return 127;
     }
   return rval;
@@ -3811,7 +3586,7 @@ xmalloc (size_t num)
 {
   void *p = (void *) malloc (num);
   if (!p)
-    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+    lt_fatal ("Memory exhausted");
 
   return p;
 }
@@ -3845,8 +3620,8 @@ check_executable (const char *path)
 {
   struct stat st;
 
-  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
-                  nonempty (path));
+  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
+			  path ? (*path ? path : "EMPTY!") : "NULL!"));
   if ((!path) || (!*path))
     return 0;
 
@@ -3863,8 +3638,8 @@ make_executable (const char *path)
   int rval = 0;
   struct stat st;
 
-  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
-                  nonempty (path));
+  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
+			  path ? (*path ? path : "EMPTY!") : "NULL!"));
   if ((!path) || (!*path))
     return 0;
 
@@ -3890,8 +3665,8 @@ find_executable (const char *wrapper)
   int tmp_len;
   char *concat_name;
 
-  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
-                  nonempty (wrapper));
+  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
+			  wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
 
   if ((wrapper == NULL) || (*wrapper == '\0'))
     return NULL;
@@ -3944,8 +3719,7 @@ find_executable (const char *wrapper)
 		{
 		  /* empty path: current directory */
 		  if (getcwd (tmp, LT_PATHMAX) == NULL)
-		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
-                              nonnull (strerror (errno)));
+		    lt_fatal ("getcwd failed");
 		  tmp_len = strlen (tmp);
 		  concat_name =
 		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
@@ -3970,8 +3744,7 @@ find_executable (const char *wrapper)
     }
   /* Relative path | not found in path: prepend cwd */
   if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
-              nonnull (strerror (errno)));
+    lt_fatal ("getcwd failed");
   tmp_len = strlen (tmp);
   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
   memcpy (concat_name, tmp, tmp_len);
@@ -3997,9 +3770,8 @@ chase_symlinks (const char *pathspec)
   int has_symlinks = 0;
   while (strlen (tmp_pathspec) && !has_symlinks)
     {
-      lt_debugprintf (__FILE__, __LINE__,
-		      "checking path component for symlinks: %s\n",
-		      tmp_pathspec);
+      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+			      tmp_pathspec));
       if (lstat (tmp_pathspec, &s) == 0)
 	{
 	  if (S_ISLNK (s.st_mode) != 0)
@@ -4021,9 +3793,8 @@ chase_symlinks (const char *pathspec)
 	}
       else
 	{
-	  lt_fatal (__FILE__, __LINE__,
-		    "error accessing file \"%s\": %s",
-		    tmp_pathspec, nonnull (strerror (errno)));
+	  char *errstr = strerror (errno);
+	  lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
 	}
     }
   XFREE (tmp_pathspec);
@@ -4036,8 +3807,7 @@ chase_symlinks (const char *pathspec)
   tmp_pathspec = realpath (pathspec, buf);
   if (tmp_pathspec == 0)
     {
-      lt_fatal (__FILE__, __LINE__,
-		"could not follow symlinks for %s", pathspec);
+      lt_fatal ("Could not follow symlinks for %s", pathspec);
     }
   return xstrdup (tmp_pathspec);
 #endif
@@ -4063,25 +3833,11 @@ strendzap (char *str, const char *pat)
   return str;
 }
 
-void
-lt_debugprintf (const char *file, int line, const char *fmt, ...)
-{
-  va_list args;
-  if (lt_debug)
-    {
-      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
-      va_start (args, fmt);
-      (void) vfprintf (stderr, fmt, args);
-      va_end (args);
-    }
-}
-
 static void
-lt_error_core (int exit_status, const char *file,
-	       int line, const char *mode,
+lt_error_core (int exit_status, const char *mode,
 	       const char *message, va_list ap)
 {
-  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  fprintf (stderr, "%s: %s: ", program_name, mode);
   vfprintf (stderr, message, ap);
   fprintf (stderr, ".\n");
 
@@ -4090,32 +3846,20 @@ lt_error_core (int exit_status, const char *file,
 }
 
 void
-lt_fatal (const char *file, int line, const char *message, ...)
+lt_fatal (const char *message, ...)
 {
   va_list ap;
   va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
   va_end (ap);
 }
 
-static const char *
-nonnull (const char *s)
-{
-  return s ? s : "(null)";
-}
-
-static const char *
-nonempty (const char *s)
-{
-  return (s && !*s) ? "(empty)" : nonnull (s);
-}
-
 void
 lt_setenv (const char *name, const char *value)
 {
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(lt_setenv) setting '%s' to '%s'\n",
-                  nonnull (name), nonnull (value));
+  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
   {
 #ifdef HAVE_SETENV
     /* always make a copy, for consistency with !HAVE_SETENV */
@@ -4160,12 +3904,95 @@ lt_extend_str (const char *orig_value, const char *add, int to_end)
   return new_value;
 }
 
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+  const char *p;
+  int len;
+  if (!arg || !*arg)
+    return 1;
+
+  p = strchr (arg, (int)'=');
+
+  if (!p)
+    return 1;
+
+  *value = xstrdup (++p);
+
+  len = strlen (arg) - strlen (*value);
+  *name = XMALLOC (char, len);
+  strncpy (*name, arg, len-1);
+  (*name)[len - 1] = '\0';
+
+  return 0;
+}
+
+void
+lt_opt_process_env_set (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+    }
+
+  lt_setenv (name, value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 0);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_append (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 1);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
 void
 lt_update_exe_path (const char *name, const char *value)
 {
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
-                  nonnull (name), nonnull (value));
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
 
   if (name && *name && value && *value)
     {
@@ -4184,9 +4011,9 @@ lt_update_exe_path (const char *name, const char *value)
 void
 lt_update_lib_path (const char *name, const char *value)
 {
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
-                  nonnull (name), nonnull (value));
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
 
   if (name && *name && value && *value)
     {
@@ -4196,152 +4023,11 @@ lt_update_lib_path (const char *name, const char *value)
     }
 }
 
-EOF
-	    case $host_os in
-	      mingw*)
-		cat <<"EOF"
-
-/* Prepares an argument vector before calling spawn().
-   Note that spawn() does not by itself call the command interpreter
-     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
-      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
-         GetVersionEx(&v);
-         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
-      }) ? "cmd.exe" : "command.com").
-   Instead it simply concatenates the arguments, separated by ' ', and calls
-   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
-   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
-   special way:
-   - Space and tab are interpreted as delimiters. They are not treated as
-     delimiters if they are surrounded by double quotes: "...".
-   - Unescaped double quotes are removed from the input. Their only effect is
-     that within double quotes, space and tab are treated like normal
-     characters.
-   - Backslashes not followed by double quotes are not special.
-   - But 2*n+1 backslashes followed by a double quote become
-     n backslashes followed by a double quote (n >= 0):
-       \" -> "
-       \\\" -> \"
-       \\\\\" -> \\"
- */
-#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-char **
-prepare_spawn (char **argv)
-{
-  size_t argc;
-  char **new_argv;
-  size_t i;
-
-  /* Count number of arguments.  */
-  for (argc = 0; argv[argc] != NULL; argc++)
-    ;
-
-  /* Allocate new argument vector.  */
-  new_argv = XMALLOC (char *, argc + 1);
-
-  /* Put quoted arguments into the new argument vector.  */
-  for (i = 0; i < argc; i++)
-    {
-      const char *string = argv[i];
-
-      if (string[0] == '\0')
-	new_argv[i] = xstrdup ("\"\"");
-      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
-	{
-	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
-	  size_t length;
-	  unsigned int backslashes;
-	  const char *s;
-	  char *quoted_string;
-	  char *p;
-
-	  length = 0;
-	  backslashes = 0;
-	  if (quote_around)
-	    length++;
-	  for (s = string; *s != '\0'; s++)
-	    {
-	      char c = *s;
-	      if (c == '"')
-		length += backslashes + 1;
-	      length++;
-	      if (c == '\\')
-		backslashes++;
-	      else
-		backslashes = 0;
-	    }
-	  if (quote_around)
-	    length += backslashes + 1;
-
-	  quoted_string = XMALLOC (char, length + 1);
-
-	  p = quoted_string;
-	  backslashes = 0;
-	  if (quote_around)
-	    *p++ = '"';
-	  for (s = string; *s != '\0'; s++)
-	    {
-	      char c = *s;
-	      if (c == '"')
-		{
-		  unsigned int j;
-		  for (j = backslashes + 1; j > 0; j--)
-		    *p++ = '\\';
-		}
-	      *p++ = c;
-	      if (c == '\\')
-		backslashes++;
-	      else
-		backslashes = 0;
-	    }
-	  if (quote_around)
-	    {
-	      unsigned int j;
-	      for (j = backslashes; j > 0; j--)
-		*p++ = '\\';
-	      *p++ = '"';
-	    }
-	  *p = '\0';
-
-	  new_argv[i] = quoted_string;
-	}
-      else
-	new_argv[i] = (char *) string;
-    }
-  new_argv[argc] = NULL;
-
-  return new_argv;
-}
-EOF
-		;;
-	    esac
-
-            cat <<"EOF"
-void lt_dump_script (FILE* f)
-{
-EOF
-	    func_emit_wrapper yes |
-              $SED -e 's/\([\\"]\)/\\\1/g' \
-	           -e 's/^/  fputs ("/' -e 's/$/\\n", f);/'
 
-            cat <<"EOF"
-}
 EOF
 }
 # end: func_emit_cwrapperexe_src
 
-# func_win32_import_lib_p ARG
-# True if ARG is an import lib, as indicated by $file_magic_cmd
-func_win32_import_lib_p ()
-{
-    $opt_debug
-    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
-    *import*) : ;;
-    *) false ;;
-    esac
-}
-
 # func_mode_link arg...
 func_mode_link ()
 {
@@ -4386,7 +4072,6 @@ func_mode_link ()
     new_inherited_linker_flags=
 
     avoid_version=no
-    bindir=
     dlfiles=
     dlprefiles=
     dlself=no
@@ -4479,11 +4164,6 @@ func_mode_link ()
 	esac
 
 	case $prev in
-	bindir)
-	  bindir="$arg"
-	  prev=
-	  continue
-	  ;;
 	dlfiles|dlprefiles)
 	  if test "$preload" = no; then
 	    # Add the symbol object into the linking commands.
@@ -4745,11 +4425,6 @@ func_mode_link ()
 	continue
 	;;
 
-      -bindir)
-	prev=bindir
-	continue
-	;;
-
       -dlopen)
 	prev=dlfiles
 	continue
@@ -4828,7 +4503,7 @@ func_mode_link ()
 	esac
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
 	  ::) dllsearchpath=$dir;;
@@ -4847,7 +4522,7 @@ func_mode_link ()
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
@@ -5033,7 +4708,7 @@ func_mode_link ()
 	for flag in $args; do
 	  IFS="$save_ifs"
           func_quote_for_eval "$flag"
-	  arg="$arg $func_quote_for_eval_result"
+	  arg="$arg $wl$func_quote_for_eval_result"
 	  compiler_flags="$compiler_flags $func_quote_for_eval_result"
 	done
 	IFS="$save_ifs"
@@ -5079,19 +4754,18 @@ func_mode_link ()
 	arg="$func_quote_for_eval_result"
 	;;
 
-      # Flags to be passed through unchanged, with rationale:
-      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
-      # -r[0-9][0-9]*        specify processor for the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
-      # +DA*, +DD*           enable 64-bit mode for the HP compiler
-      # -q*                  compiler args for the IBM compiler
-      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
-      # -F/path              path to uninstalled frameworks, gcc on darwin
-      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
-      # @file                GCC response files
-      # -tp=*                Portland pgcc target processor selection
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -F/path gives path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+      # @file GCC response files
       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*)
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
         func_quote_for_eval "$arg"
 	arg="$func_quote_for_eval_result"
         func_append compile_command " $arg"
@@ -5251,7 +4925,7 @@ func_mode_link ()
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
     else
       shlib_search_path=
     fi
@@ -5359,7 +5033,10 @@ func_mode_link ()
 	case $pass in
 	dlopen) libs="$dlfiles" ;;
 	dlpreopen) libs="$dlprefiles" ;;
-	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	link)
+	  libs="$deplibs %DEPLIBS%"
+	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+	  ;;
 	esac
       fi
       if test "$linkmode,$pass" = "lib,dlpreopen"; then
@@ -5374,8 +5051,7 @@ func_mode_link ()
 	  # Collect preopened libtool deplibs, except any this library
 	  # has declared as weak libs
 	  for deplib in $dependency_libs; do
-	    func_basename "$deplib"
-            deplib_base=$func_basename_result
+            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
 	    case " $weak_libs " in
 	    *" $deplib_base "*) ;;
 	    *) deplibs="$deplibs $deplib" ;;
@@ -5554,7 +5230,7 @@ func_mode_link ()
 		match_pattern*)
 		  set dummy $deplibs_check_method; shift
 		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
 		    | $EGREP "$match_pattern_regex" > /dev/null; then
 		    valid_a_lib=yes
 		  fi
@@ -5564,15 +5240,15 @@ func_mode_link ()
 		;;
 	      esac
 	      if test "$valid_a_lib" != yes; then
-		echo
+		$ECHO
 		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because the file extensions .$libext of this argument makes me believe"
-		echo "*** that it is just a static archive that I should not use here."
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
+		$ECHO "*** that it is just a static archive that I should not use here."
 	      else
-		echo
+		$ECHO
 		$ECHO "*** Warning: Linking the shared library $output against the"
 		$ECHO "*** static library $deplib is not portable!"
 		deplibs="$deplib $deplibs"
@@ -5645,7 +5321,7 @@ func_mode_link ()
 
 	# Convert "-framework foo" to "foo.ltframework"
 	if test -n "$inherited_linker_flags"; then
-	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
 	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
 	    case " $new_inherited_linker_flags " in
 	      *" $tmp_inherited_linker_flag "*) ;;
@@ -5653,7 +5329,7 @@ func_mode_link ()
 	    esac
 	  done
 	fi
-	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	if test "$linkmode,$pass" = "lib,link" ||
 	   test "$linkmode,$pass" = "prog,scan" ||
 	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
@@ -5671,19 +5347,19 @@ func_mode_link ()
 	    # It is a libtool convenience library, so add in its objects.
 	    convenience="$convenience $ladir/$objdir/$old_library"
 	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+	    tmp_libs=
+	    for deplib in $dependency_libs; do
+	      deplibs="$deplib $deplibs"
+	      if $opt_duplicate_deps ; then
+		case "$tmp_libs " in
+		*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+		esac
+	      fi
+	      tmp_libs="$tmp_libs $deplib"
+	    done
 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
 	    func_fatal_error "\`$lib' is not a convenience library"
 	  fi
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    deplibs="$deplib $deplibs"
-	    if $opt_duplicate_deps ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done
 	  continue
 	fi # $pass = conv
 
@@ -5907,7 +5583,7 @@ func_mode_link ()
 	    fi
 	  done
 	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
-	    echo
+	    $ECHO
 	    if test "$linkmode" = prog; then
 	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
 	    else
@@ -6010,9 +5686,9 @@ func_mode_link ()
 		      if test "X$dlopenmodule" != "X$lib"; then
 			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
 			if test -z "$old_library" ; then
-			  echo
-			  echo "*** And there doesn't seem to be a static archive available"
-			  echo "*** The link will probably fail, sorry"
+			  $ECHO
+			  $ECHO "*** And there doesn't seem to be a static archive available"
+			  $ECHO "*** The link will probably fail, sorry"
 			else
 			  add="$dir/$old_library"
 			fi
@@ -6152,21 +5828,21 @@ func_mode_link ()
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
-	    echo
+	    $ECHO
 	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
-	    echo "*** I have the capability to make that library automatically link in when"
-	    echo "*** you link to this library.  But I can only do this if you have a"
-	    echo "*** shared version of the library, which you do not appear to have."
+	    $ECHO "*** I have the capability to make that library automatically link in when"
+	    $ECHO "*** you link to this library.  But I can only do this if you have a"
+	    $ECHO "*** shared version of the library, which you do not appear to have."
 	    if test "$module" = yes; then
-	      echo "*** But as you try to build a module library, libtool will still create "
-	      echo "*** a static module, that should work as long as the dlopening application"
-	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      $ECHO "*** But as you try to build a module library, libtool will still create "
+	      $ECHO "*** a static module, that should work as long as the dlopening application"
+	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
 	      if test -z "$global_symbol_pipe"; then
-		echo
-		echo "*** However, this would only work if libtool was able to extract symbol"
-		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		echo "*** not find such a program.  So, this module is probably useless."
-		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+		$ECHO
+		$ECHO "*** However, this would only work if libtool was able to extract symbol"
+		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		$ECHO "*** not find such a program.  So, this module is probably useless."
+		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
 	      fi
 	      if test "$build_old_libs" = no; then
 		build_libtool_libs=module
@@ -6286,7 +5962,7 @@ func_mode_link ()
 	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
 	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
 	else
-	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	fi
       fi
       dependency_libs="$newdependency_libs"
@@ -6454,7 +6130,7 @@ func_mode_link ()
 	if test "$deplibs_check_method" != pass_all; then
 	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
 	else
-	  echo
+	  $ECHO
 	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
 	  $ECHO "*** objects $objs is not portable!"
 	  libobjs="$libobjs $objs"
@@ -6522,7 +6198,7 @@ func_mode_link ()
 	    age="$number_minor"
 	    revision="$number_revision"
 	    ;;
-	  freebsd-aout|freebsd-elf|qnx|sunos)
+	  freebsd-aout|freebsd-elf|sunos)
 	    current="$number_major"
 	    revision="$number_minor"
 	    age="0"
@@ -6534,6 +6210,9 @@ func_mode_link ()
 	    revision="$number_minor"
 	    lt_irix_increment=no
 	    ;;
+	  *)
+	    func_fatal_configuration "$modename: unknown library version type \`$version_type'"
+	    ;;
 	  esac
 	  ;;
 	no)
@@ -6756,14 +6435,14 @@ func_mode_link ()
 	oldlibs="$oldlibs $output_objdir/$libname.$libext"
 
 	# Transform .lo files to .o files.
-	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
       fi
 
       # Eliminate all temporary directories.
       #for path in $notinst_path; do
-      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
-      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
-      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+      #	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
+      #	deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
       #done
 
       if test -n "$xrpath"; then
@@ -6804,7 +6483,7 @@ func_mode_link ()
       if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
 	    # these systems don't actually have a c library (as such)!
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
@@ -6889,13 +6568,13 @@ EOF
 		    newdeplibs="$newdeplibs $i"
 		  else
 		    droppeddeps=yes
-		    echo
+		    $ECHO
 		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		    echo "*** I have the capability to make that library automatically link in when"
-		    echo "*** you link to this library.  But I can only do this if you have a"
-		    echo "*** shared version of the library, which I believe you do not have"
-		    echo "*** because a test_compile did reveal that the linker did not use it for"
-		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		    $ECHO "*** I have the capability to make that library automatically link in when"
+		    $ECHO "*** you link to this library.  But I can only do this if you have a"
+		    $ECHO "*** shared version of the library, which I believe you do not have"
+		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
+		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
 		  fi
 		fi
 		;;
@@ -6932,22 +6611,22 @@ EOF
 		      newdeplibs="$newdeplibs $i"
 		    else
 		      droppeddeps=yes
-		      echo
+		      $ECHO
 		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		      echo "*** I have the capability to make that library automatically link in when"
-		      echo "*** you link to this library.  But I can only do this if you have a"
-		      echo "*** shared version of the library, which you do not appear to have"
-		      echo "*** because a test_compile did reveal that the linker did not use this one"
-		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		      $ECHO "*** I have the capability to make that library automatically link in when"
+		      $ECHO "*** you link to this library.  But I can only do this if you have a"
+		      $ECHO "*** shared version of the library, which you do not appear to have"
+		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
+		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
 		    fi
 		  fi
 		else
 		  droppeddeps=yes
-		  echo
+		  $ECHO
 		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
-		  echo "*** make it link in!  You will probably need to install it or some"
-		  echo "*** library that it depends on before this library will be fully"
-		  echo "*** functional.  Installing it before continuing would be even better."
+		  $ECHO "*** make it link in!  You will probably need to install it or some"
+		  $ECHO "*** library that it depends on before this library will be fully"
+		  $ECHO "*** functional.  Installing it before continuing would be even better."
 		fi
 		;;
 	      *)
@@ -6993,7 +6672,7 @@ EOF
 			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
 			case $potliblink in
 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
 			esac
 		      done
 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
@@ -7008,12 +6687,12 @@ EOF
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		echo
+		$ECHO
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because I did check the linker path looking for a file starting"
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
 		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
 		else
@@ -7051,7 +6730,7 @@ EOF
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
 		       $EGREP "$match_pattern_regex" > /dev/null; then
 		      newdeplibs="$newdeplibs $a_deplib"
 		      a_deplib=""
@@ -7062,12 +6741,12 @@ EOF
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		echo
+		$ECHO
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because I did check the linker path looking for a file starting"
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
 		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
 		else
@@ -7085,25 +6764,25 @@ EOF
 	  ;;
 	none | unknown | *)
 	  newdeplibs=""
-	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
+	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
 	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	    for i in $predeps $postdeps ; do
 	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
 	    done
 	  fi
-	  case $tmp_deplibs in
-	  *[!\	\ ]*)
-	    echo
+	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[	 ]//g' |
+	     $GREP . >/dev/null; then
+	    $ECHO
 	    if test "X$deplibs_check_method" = "Xnone"; then
-	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
-	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."
 	    fi
-	    echo "*** All declared inter-library dependencies are being dropped."
+	    $ECHO "*** All declared inter-library dependencies are being dropped."
 	    droppeddeps=yes
-	    ;;
-	  esac
+	  fi
 	  ;;
 	esac
 	versuffix=$versuffix_save
@@ -7115,23 +6794,23 @@ EOF
 	case $host in
 	*-*-rhapsody* | *-*-darwin1.[012])
 	  # On Rhapsody replace the C library with the System framework
-	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 	  ;;
 	esac
 
 	if test "$droppeddeps" = yes; then
 	  if test "$module" = yes; then
-	    echo
-	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO
+	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
 	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
-	    echo "*** a static module, that should work as long as the dlopening"
-	    echo "*** application is linked with the -dlopen flag."
+	    $ECHO "*** a static module, that should work as long as the dlopening"
+	    $ECHO "*** application is linked with the -dlopen flag."
 	    if test -z "$global_symbol_pipe"; then
-	      echo
-	      echo "*** However, this would only work if libtool was able to extract symbol"
-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      echo "*** not find such a program.  So, this module is probably useless."
-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      $ECHO
+	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
+	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      $ECHO "*** not find such a program.  So, this module is probably useless."
+	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
 	    fi
 	    if test "$build_old_libs" = no; then
 	      oldlibs="$output_objdir/$libname.$libext"
@@ -7141,16 +6820,16 @@ EOF
 	      build_libtool_libs=no
 	    fi
 	  else
-	    echo "*** The inter-library dependencies that have been dropped here will be"
-	    echo "*** automatically added whenever a program is linked with this library"
-	    echo "*** or is declared to -dlopen it."
+	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
+	    $ECHO "*** automatically added whenever a program is linked with this library"
+	    $ECHO "*** or is declared to -dlopen it."
 
 	    if test "$allow_undefined" = no; then
-	      echo
-	      echo "*** Since this library must not contain undefined symbols,"
-	      echo "*** because either the platform does not support them or"
-	      echo "*** it was explicitly requested with -no-undefined,"
-	      echo "*** libtool will only create a static version of it."
+	      $ECHO
+	      $ECHO "*** Since this library must not contain undefined symbols,"
+	      $ECHO "*** because either the platform does not support them or"
+	      $ECHO "*** it was explicitly requested with -no-undefined,"
+	      $ECHO "*** libtool will only create a static version of it."
 	      if test "$build_old_libs" = no; then
 		oldlibs="$output_objdir/$libname.$libext"
 		build_libtool_libs=module
@@ -7167,9 +6846,9 @@ EOF
       # Time to change all our "foo.ltframework" stuff back to "-framework foo"
       case $host in
 	*-*-darwin*)
-	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	  ;;
       esac
 
@@ -7291,7 +6970,7 @@ EOF
 	done
 
 	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 	test "X$libobjs" = "X " && libobjs=
 
 	delfiles=
@@ -7357,7 +7036,7 @@ EOF
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	  tmp_export_symbols="$export_symbols"
 	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
 	fi
 
 	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
@@ -7458,8 +7137,7 @@ EOF
 	    save_libobjs=$libobjs
 	  fi
 	  save_output=$output
-	  func_basename "$output"
-	  output_la=$func_basename_result
+	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
 
 	  # Clear the reloadable object creation command queue and
 	  # initialize k to one.
@@ -7472,12 +7150,12 @@ EOF
 	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
 	    output=${output_objdir}/${output_la}.lnkscript
 	    func_verbose "creating GNU ld script: $output"
-	    echo 'INPUT (' > $output
+	    $ECHO 'INPUT (' > $output
 	    for obj in $save_libobjs
 	    do
 	      $ECHO "$obj" >> $output
 	    done
-	    echo ')' >> $output
+	    $ECHO ')' >> $output
 	    delfiles="$delfiles $output"
 	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
 	    output=${output_objdir}/${output_la}.lnk
@@ -7519,19 +7197,17 @@ EOF
 		  # command to the queue.
 		  if test "$k" -eq 1 ; then
 		    # The first file doesn't have a previous command to add.
-		    reload_objs=$objlist
-		    eval concat_cmds=\"$reload_cmds\"
+		    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
 		  else
 		    # All subsequent reloadable object files will link in
 		    # the last one created.
-		    reload_objs="$objlist $last_robj"
-		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
 		  fi
 		  last_robj=$output_objdir/$output_la-${k}.$objext
 		  func_arith $k + 1
 		  k=$func_arith_result
 		  output=$output_objdir/$output_la-${k}.$objext
-		  objlist=" $obj"
+		  objlist=$obj
 		  func_len " $last_robj"
 		  func_arith $len0 + $func_len_result
 		  len=$func_arith_result
@@ -7541,8 +7217,7 @@ EOF
 	      # reloadable object file.  All subsequent reloadable object
 	      # files will link in the last one created.
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      reload_objs="$objlist $last_robj"
-	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
 	      if test -n "$last_robj"; then
 	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
 	      fi
@@ -7601,7 +7276,7 @@ EOF
 	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	      tmp_export_symbols="$export_symbols"
 	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	      $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
 	    fi
 
 	    if test -n "$orig_export_symbols"; then
@@ -7766,7 +7441,7 @@ EOF
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
 	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	  reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
 	else
 	  gentop="$output_objdir/${obj}x"
 	  generated="$generated $gentop"
@@ -7777,7 +7452,7 @@ EOF
       fi
 
       # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
       output="$obj"
       func_execute_cmds "$reload_cmds" 'exit $?'
@@ -7837,8 +7512,8 @@ EOF
       case $host in
       *-*-rhapsody* | *-*-darwin1.[012])
 	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
-	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 	;;
       esac
 
@@ -7855,8 +7530,8 @@ EOF
 	  esac
 	fi
 	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
-	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	;;
       esac
 
@@ -7993,8 +7668,8 @@ EOF
 
       if test -n "$libobjs" && test "$build_old_libs" = yes; then
 	# Transform all the library objects into standard objects.
-	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
-	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
       fi
 
       func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
@@ -8006,15 +7681,15 @@ EOF
 
       wrappers_required=yes
       case $host in
-      *cegcc* | *mingw32ce*)
-        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
-        wrappers_required=no
-        ;;
       *cygwin* | *mingw* )
         if test "$build_libtool_libs" != yes; then
           wrappers_required=no
         fi
         ;;
+      *cegcc)
+        # Disable wrappers for cegcc, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
       *)
         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
           wrappers_required=no
@@ -8023,7 +7698,7 @@ EOF
       esac
       if test "$wrappers_required" = no; then
 	# Replace the output file specification.
-	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.
@@ -8070,7 +7745,7 @@ EOF
 	# We don't need to create a wrapper script.
 	link_command="$compile_var$compile_command$compile_rpath"
 	# Replace the output file specification.
-	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 	# Delete the old output file.
 	$opt_dry_run || $RM $output
 	# Link the executable and exit
@@ -8089,7 +7764,7 @@ EOF
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then
-	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
 	  else
 	    # fast_install is set to needless
 	    relink_command=
@@ -8101,7 +7776,7 @@ EOF
       fi
 
       # Replace the output file specification.
-      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
 
       # Delete the old output files.
       $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
@@ -8125,7 +7800,18 @@ EOF
 	  fi
 	done
 	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Quote $ECHO for shipping.
+      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
+	case $progpath in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+	esac
+	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
       fi
 
       # Only actually do things if not in dry run mode.
@@ -8246,7 +7932,7 @@ EOF
 	    done | sort | sort -uc >/dev/null 2>&1); then
 	  :
 	else
-	  echo "copying selected object files to avoid basename conflicts..."
+	  $ECHO "copying selected object files to avoid basename conflicts..."
 	  gentop="$output_objdir/${outputname}x"
 	  generated="$generated $gentop"
 	  func_mkdir_p "$gentop"
@@ -8357,7 +8043,7 @@ EOF
       done
       # Quote the link command for shipping.
       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
       if test "$hardcode_automatic" = yes ; then
 	relink_command=
       fi
@@ -8442,27 +8128,9 @@ EOF
 	  fi
 	  $RM $output
 	  # place dlname in correct position for cygwin
-	  # In fact, it would be nice if we could use this code for all target
-	  # systems that can't hard-code library paths into their executables
-	  # and that have no shared library path variable independent of PATH,
-	  # but it turns out we can't easily determine that from inspecting
-	  # libtool variables, so we have to hard-code the OSs to which it
-	  # applies here; at the moment, that means platforms that use the PE
-	  # object format with DLL files.  See the long comment at the top of
-	  # tests/bindir.at for full details.
 	  tdlname=$dlname
 	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
-	      # If a -bindir argument was supplied, place the dll there.
-	      if test "x$bindir" != x ;
-	      then
-		func_relative_path "$install_libdir" "$bindir"
-		tdlname=$func_relative_path_result$dlname
-	      else
-		# Otherwise fall back on heuristic.
-		tdlname=../bin/$dlname
-	      fi
-	      ;;
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
 	  esac
 	  $ECHO > $output "\
 # $outputname - a libtool library file
diff --git a/src/Makefile.in b/src/Makefile.in
index 6260c1a..da51d95 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -169,6 +169,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@