path: root/sys/gio/ncarutil/autograph/agdflt.bd

C +NOAO
C         This block data has been rewritten as a run time initialization
C         subroutine (see file agdflt.f).  This original block data file
C         is retained for reference only.
C -NOAO
C
C ---------------------------------------------------------------------
C
      BLOCK DATA AGDFLT
C
C The block data subroutine AGDFLT defines the default values of those
C AUTOGRAPH parameters which can be declared in a DATA statement.  See
C AGINIT for code initializing other AUTOGRAPH parameters.
C
C Following are declarations of all the AUTOGRAPH common blocks.
C
C The following common block contains the AUTOGRAPH control parameters,
C all of which are real.  If it is changed, all of AUTOGRAPH (especially
C the routine AGSCAN) must be examined for possible side effects.
C
      COMMON /AGCONP/ QFRA,QSET,QROW,QIXY,QWND,QBAC , SVAL(2) ,
     +                XLGF,XRGF,YBGF,YTGF , XLGD,XRGD,YBGD,YTGD , SOGD ,
     +                XMIN,XMAX,QLUX,QOVX,QCEX,XLOW,XHGH ,
     +                YMIN,YMAX,QLUY,QOVY,QCEY,YLOW,YHGH ,
     +                QDAX(4),QSPA(4),PING(4),PINU(4),FUNS(4),QBTD(4),
     +                BASD(4),QMJD(4),QJDP(4),WMJL(4),WMJR(4),QMND(4),
     +                QNDP(4),WMNL(4),WMNR(4),QLTD(4),QLED(4),QLFD(4),
     +                QLOF(4),QLOS(4),DNLA(4),WCLM(4),WCLE(4) ,
     +                QODP,QCDP,WOCD,WODQ,QDSH(26) ,
     +                     QDLB,QBIM,FLLB(10,8),QBAN ,
     +                QLLN,TCLN,QNIM,FLLN(6,16),QNAN ,
     +                XLGW,XRGW,YBGW,YTGW , XLUW,XRUW,YBUW,YTUW ,
     +                XLCW,XRCW,YBCW,YTCW , WCWP,HCWP,SCWP ,
     +                XBGA(4),YBGA(4),UBGA(4),XNDA(4),YNDA(4),UNDA(4),
     +                QBTP(4),BASE(4),QMNT(4),QLTP(4),QLEX(4),QLFL(4),
     +                QCIM(4),QCIE(4),RFNL(4),WNLL(4),WNLR(4),WNLB(4),
     +                WNLE(4),QLUA(4) ,
     +                RBOX(6),DBOX(6,4),SBOX(6,4)
C
C The following common block contains other AUTOGRAPH variables, both
C real and integer, which are not control parameters.
C
      COMMON /AGORIP/ SMRL , ISLD , MWCL,MWCM,MWCE,MDLA,MWCD,MWDQ ,
     +                INIF
C
C The following common block contains other AUTOGRAPH variables, of
C type character.
C
      COMMON /AGOCHP/ CHS1,CHS2
C
      CHARACTER*504 CHS1,CHS2
C
C The following common blocks contain variables which are required for
C the character-storage-and-retrieval scheme of AUTOGRAPH.
C
      COMMON /AGCHR1/ LNIC,INCH(2,50),LNCA,INCA
C
      COMMON /AGCHR2/ CHRA(2000)
C
      CHARACTER*1 CHRA
C
C ---------------------------------------------------------------------
C
C Following are declarations of default values of variables in the
C AUTOGRAPH common blocks.
C
C ---------------------------------------------------------------------
C
C QFRA defines the control parameter 'FRAME.', which specifies when, if
C ever, the EZ... routines are to call FRAME to advance to a new frame.
C
      DATA QFRA / 1. /
C
C QSET defines the control parameter 'SET.', which determines how the
C last call to the plot-package routine "SET" is to affect AUTOGRAPH.
C
      DATA QSET / 1. /
C
C QROW defines the control parameter 'ROW.', which determines how the x
C and y input arrays (in calls to AGSTUP and AGCURV) are to be used.
C
      DATA QROW / 1. /
C
C QIXY defines the control parameter 'INVERT.', which, if set non-zero,
C causes the routines AGSTUP and AGCURV to behave as if the arguments
C defining the x and y data had been interchanged.
C
      DATA QIXY / 0. /
C
C QWND defines the control parameter 'WINDOW.', which, if set non-zero,
C causes curves drawn to be scissored by the edge of the curve window.
C
      DATA QWND / 0. /
C
C QBAC defines the control parameter 'BACKGROUND.', which can be given
C any of four values to set up four specific types of plot background.
C
      DATA QBAC / 1. /
C
C SVAL defines the control parameters 'NULL/1.' and 'NULL/2.', which are
C used in various ways by AUTOGRAPH.
C
      DATA SVAL(1) / 1E36 / , SVAL(2) / 2E36 /
C
C XLGF, XRGF, YBGF, and YTGF define the parameter-group 'GRAPH.'; they
C specify the position of the graph window within the plotter frame.
C
      DATA XLGF / 0. / , XRGF / 1. / , YBGF / 0. / , YTGF / 1. /
C
C XLGD, XRGD, YBGD, and YTGD define the first four parameters in the
C group 'GRID.'; they specify the position of the grid window within
C the graph window.
C
      DATA XLGD / .15 / , XRGD / .95 / , YBGD / .15 / , YTGD / .95 /
C
C SOGD defines the control parameter 'GRID/SHAPE.', which defines the
C shape of the grid window.
C
      DATA SOGD / 0. /
C
C XMIN and XMAX define the control parameters 'X/MIN.' and 'X/MAX.',
C which determine how minimum and maximum values of x are to be chosen.
C Null values imply that AUTOGRAPH is to choose real values; non-null
C values are the actual values to be used (perhaps after rounding).
C
      DATA XMIN / 1E36 / , XMAX / 1E36 /
C
C QLUX defines the control parameter 'X/LOG.', which is set non-zero to
C specify that the horizontal axis is to be logarithmic.
C
      DATA QLUX / 0. /
C
C QOVX defines the control parameter 'X/ORDER.', which is set non-zero
C to flip the horizontal axis end-for-end.
C
      DATA QOVX / 0. /
C
C QCEX defines the control parameter 'X/NICE.', which determines which,
C if either, of the horizontal axes is to have "nice" (rounded) values
C at its ends.
C
      DATA QCEX / -1. /
C
C XLOW and XHGH define the control parameters 'X/SMALLEST.' and
C 'X/LARGEST.'; they come into play only when XMIN and/or XMAX are null
C and they are non-null, in which case they set limits on the range of
C x data to be considered when choosing the minimum and/or maximum.
C
      DATA XLOW / 1E36 / , XHGH / 1E36 /
C
C YMIN and YMAX define the control parameters 'Y/MIN.' and 'Y/MAX.',
C which determine how minimum and maximum values of y are to be chosen.
C Null values imply that AUTOGRAPH is to choose real values; non-null
C values are the actual values to be used (perhaps after rounding).
C
      DATA YMIN / 1E36 / , YMAX / 1E36 /
C
C QLUY defines the control parameter 'Y/LOG.', which is set non-zero to
C specify that the horizontal axis is to be logarithmic.
C
      DATA QLUY / 0. /
C
C QOVY defines the control parameter 'Y/ORDER.', which is set non-zero
C to flip the horizontal axis end-for-end.
C
      DATA QOVY / 0. /
C
C QCEY defines the control parameter 'Y/NICE.', which determines which,
C if either, of the horizontal axes is to have "nice" (rounded) values
C at its ends.
C
      DATA QCEY / -1. /
C
C YLOW and YHGH define the control parameters 'Y/SMALLEST.' and
C 'Y/LARGEST.'; they come into play only when YMIN and/or YMAX are null
C and they are non-null, in which case they set limits on the range of
C y data to be considered when choosing the minimum and/or maximum.
C
      DATA YLOW / 1E36 / , YHGH / 1E36 /
C
C QDAX(i) defines the control parameters 'AXIS/s/CONTROL.' (i=1 implies
C s='LEFT', i=2 implies s='RIGHT', i=3 implies s='BOTTOM', i=4 implies
C s='TOP').  Each of these specifies whether or not a given axis will
C be drawn or not and what liberties may be taken with numeric labels
C on the axis.
C
      DATA QDAX(1)/ 4. / , QDAX(2)/ 4. / , QDAX(3)/ 4. / , QDAX(4)/ 4. /
C
C Each QSPA(i) defines a control parameter 'AXIS/s/LINE.', which says
C whether or not the line portion of a particular axis is to be drawn.
C
      DATA QSPA(1)/ 0. / , QSPA(2)/ 0. / , QSPA(3)/ 0. / , QSPA(4)/ 0. /
C
C Each PING(i) defines a control parameter 'AXIS/s/INTERSECTION/GRID.',
C which may be used to move a particular axis to a specified position.
C
      DATA PING(1)/1E36/ , PING(2)/1E36/ , PING(3)/1E36/ , PING(4)/1E36/
C
C Each PINU(i) defines a control parameter 'AXIS/s/INTERSECTION/USER.',
C which may be used to move a particular axis to a specified position.
C
      DATA PINU(1)/1E36/ , PINU(2)/1E36/ , PINU(3)/1E36/ , PINU(4)/1E36/
C
C Each FUNS(i) defines a control parameter 'AXIS/s/FUNCTION.', which is
C used within a user-supplied version of AGUTOL to select a particular
C uset-system-to-label-system mapping for a particular axis.  The
C default value selects the identity mapping.
C
      DATA FUNS(1)/ 0. / , FUNS(2)/ 0. / , FUNS(3)/ 0. / , FUNS(4)/ 0. /
C
C The values of QBTD(i), BASD(i), QMJD(i), QJDP(i), WMJL(i), and WMJR(i)
C together define the control-parameter group 'AXIS/s/TICKS/MAJOR.',
C which determines the positioning and appearance of the major ticks on
C a particular axis.
C
      DATA QBTD(1)/1E36/ , QBTD(2)/1E36/ , QBTD(3)/1E36/ , QBTD(4)/1E36/
      DATA BASD(1)/1E36/ , BASD(2)/1E36/ , BASD(3)/1E36/ , BASD(4)/1E36/
      DATA QMJD(1)/ 6. / , QMJD(2)/ 6. / , QMJD(3)/ 6. / , QMJD(4)/ 6. /
      DATA QJDP(1)/1E36/ , QJDP(2)/1E36/ , QJDP(3)/1E36/ , QJDP(4)/1E36/
      DATA WMJL(1)/ 0. / , WMJL(2)/ 0. / , WMJL(3)/ 0. / , WMJL(4)/ 0. /
      DATA WMJR(1)/.015/ , WMJR(2)/.015/ , WMJR(3)/.015/ , WMJR(4)/.015/
C
C The values of QMND(i), QNDP(i), WMNL(i), and WMNR(i) together define
C the control-parameter group 'AXIS/s/TICKS/MINOR.', which determines
C the positioning and appearance of the major ticks on a particular
C axis.
C
      DATA QMND(1)/1E36/ , QMND(2)/1E36/ , QMND(3)/1E36/ , QMND(4)/1E36/
      DATA QNDP(1)/1E36/ , QNDP(2)/1E36/ , QNDP(3)/1E36/ , QNDP(4)/1E36/
      DATA WMNL(1)/ 0. / , WMNL(2)/ 0. / , WMNL(3)/ 0. / , WMNL(4)/ 0. /
      DATA WMNR(1)/.010/ , WMNR(2)/.010/ , WMNR(3)/.010/ , WMNR(4)/.010/
C
C The values of QLTD(i), QLED(i), QLFD(i), QLOF(i), QLOS(i), DNLA(i),
C WCLM(i), and WCLE(i) together define the control-parameter group
C 'AXIS/s/NUMERIC.', which determines the positioning and appearance of
C the numeric labels on a particular axis.
C
      DATA QLTD(1)/1E36/ , QLTD(2)/  0./ , QLTD(3)/1E36/ , QLTD(4)/  0./
      DATA QLED(1)/1E36/ , QLED(2)/1E36/ , QLED(3)/1E36/ , QLED(4)/1E36/
      DATA QLFD(1)/1E36/ , QLFD(2)/1E36/ , QLFD(3)/1E36/ , QLFD(4)/1E36/
      DATA QLOF(1)/ 0. / , QLOF(2)/ 0. / , QLOF(3)/ 0. / , QLOF(4)/ 0. /
      DATA QLOS(1)/ 90./ , QLOS(2)/ 90./ , QLOS(3)/ 90./ , QLOS(4)/ 90./
      DATA DNLA(1)/.015/ , DNLA(2)/.015/ , DNLA(3)/.015/ , DNLA(4)/.015/
      DATA WCLM(1)/.015/ , WCLM(2)/.015/ , WCLM(3)/.015/ , WCLM(4)/.015/
      DATA WCLE(1)/.010/ , WCLE(2)/.010/ , WCLE(3)/.010/ , WCLE(4)/.010/
C
C QODP defines the control parameter 'DASH/SELECTOR.', the sign of which
C determines which set of dash patterns is used by EZMY and EZMXY (the
C alphabetic set or the user-specified set); if the user-specified set
C is selected, the magnitude of QODP determines how many of them are to
C be used.
C
      DATA QODP / 1. /
C
C QCDP defines the control parameter 'DASH/LENGTH.', which specifies the
C assumed length of dash patterns tendered to AUTOGRAPH.
C
      DATA QCDP / 8. /
C
C WOCD and WODQ define the control parameters 'DASH/CHARACTER.' and
C 'DASH/DOLLAR-QUOTE.', which specify the widths of characters used in
C character-string dash patterns.
C
      DATA WOCD / .010 / , WODQ / .010 /
C
C QDSH defines the control-parameter group 'DASH/PATTERN.'.  Each value,
C if positive, defines a binary dash pattern, and, if negative, serves
C as an identifier in retrieving a character-string dash pattern.
C
      DATA QDSH / 26*65535. /
C
C QDLB defines the control parameter 'LABEL/CONTROL.', which specifies
C what may be done with informational labels in response to overlap
C problems.
C
      DATA QDLB /2./
C
C QBIM defines the control parameter 'LABEL/BUFFER/LENGTH.' and must
C be equal to the second dimension of the array FLLB.
C
      DATA QBIM / 8. /
C
C QBAN defines the control parameter 'LABEL/NAME.'; its value is really
C a pointer into the label list.  The default value, zero, means that
C the pointer has not been set.
C
      DATA QBAN / 0. /
C
C QLLN defines the control parameter 'LINE/MAXIMUM.' - the assumed
C maximum length of character strings intended for use as the text of a
C line of a label.
C
      DATA QLLN /40./
C
C TCLN defines the control parameter 'LINE/TERMINATOR.' - which is used
C to mark the end of character strings intended for use as the text of a
C line of a label.  It is initialized in AGINIT.
C
C QNIM defines the control parameter 'LINE/BUFFER/LENGTH.' and must be
C equal to the second dimension of FLLN.
C
      DATA QNIM / 16. /
C
C QNAN defines the control parameter 'LINE/NUMBER.'; its value is really
C a pointer into the line list.  The default value, zero, says that the
C pointer has not been set.
C
      DATA QNAN / 0. /
C
C (FLLB(I,1),I=1,10) and (FLLN(I,1),I=1,6) define the label to the left
C of the grid.  The name, in FLLB(1,1), and the line text, in FLLN(4,1),
C must be filled in by AGINIT.
C
      DATA FLLB( 1,1)/   0./ , FLLB( 2,1)/   0./ , FLLB( 3,1)/   0./ ,
     +     FLLB( 4,1)/   .5/ , FLLB( 5,1)/-.015/ , FLLB( 6,1)/   0./ ,
     +     FLLB( 7,1)/  90./ , FLLB( 8,1)/   0./ , FLLB( 9,1)/   1./ ,
     +     FLLB(10,1)/   1./ , FLLN( 1,1)/+100./ , FLLN( 2,1)/   0./ ,
     +     FLLN( 3,1)/ .015/ , FLLN( 4,1)/  -2./ , FLLN( 5,1)/   1./ ,
     +     FLLN( 6,1)/   0./
C
C (FLLB(I,2),I=1,10) and (FLLN(I,2),I=1,6) define the label to the right
C of the grid.  The name, in FLLB(1,2), and the line text, in FLLN(4,2),
C must be filled in by AGINIT.
C
      DATA FLLB( 1,2)/   0./ , FLLB( 2,2)/   0./ , FLLB( 3,2)/   1./ ,
     +     FLLB( 4,2)/   .5/ , FLLB( 5,2)/+.015/ , FLLB( 6,2)/   0./ ,
     +     FLLB( 7,2)/  90./ , FLLB( 8,2)/   0./ , FLLB( 9,2)/   1./ ,
     +     FLLB(10,2)/   2./ , FLLN( 1,2)/-100./ , FLLN( 2,2)/   0./ ,
     +     FLLN( 3,2)/ .015/ , FLLN( 4,2)/  -3./ , FLLN( 5,2)/   0./ ,
     +     FLLN( 6,2)/   0./
C
C (FLLB(I,3),I=1,10) and (FLLN(I,3),I=1,6) define the label below the
C grid.  The name, in FLLB(1,3), and the line text, in FLLN(4,3), must
C be filled in by AGINIT.
C
      DATA FLLB( 1,3)/   0./ , FLLB( 2,3)/   0./ , FLLB( 3,3)/   .5/ ,
     +     FLLB( 4,3)/   0./ , FLLB( 5,3)/   0./ , FLLB( 6,3)/-.015/ ,
     +     FLLB( 7,3)/   0./ , FLLB( 8,3)/   0./ , FLLB( 9,3)/   1./ ,
     +     FLLB(10,3)/   3./ , FLLN( 1,3)/-100./ , FLLN( 2,3)/   0./ ,
     +     FLLN( 3,3)/ .015/ , FLLN( 4,3)/  -1./ , FLLN( 5,3)/   1./ ,
     +     FLLN( 6,3)/   0./
C
C (FLLB(I,4),I=1,10) and (FLLN(I,4),I=1,6) define the label above the
C grid.  The name, in FLLB(1,4), and the line text, in FLLN(4,4), must
C be filled in by AGINIT.
C
      DATA FLLB( 1,4)/   0./ , FLLB( 2,4)/   0./ , FLLB( 3,4)/   .5/ ,
     +     FLLB( 4,4)/   1./ , FLLB( 5,4)/   0./ , FLLB( 6,4)/+.020/ ,
     +     FLLB( 7,4)/   0./ , FLLB( 8,4)/   0./ , FLLB( 9,4)/   1./ ,
     +     FLLB(10,4)/   4./ , FLLN( 1,4)/+100./ , FLLN( 2,4)/   0./ ,
     +     FLLN( 3,4)/ .020/ , FLLN( 4,4)/  -3./ , FLLN( 5,4)/   0./ ,
     +     FLLN( 6,4)/   0./
C
C Certain secondary parameters must be initialized to prevent bombing.
C
      DATA QBTP(1)/  0./ , QBTP(2)/  0./ , QBTP(3)/  0./ , QBTP(4)/  0./
      DATA BASE(1)/  0./ , BASE(2)/  0./ , BASE(3)/  0./ , BASE(4)/  0./
      DATA QMNT(1)/  0./ , QMNT(2)/  0./ , QMNT(3)/  0./ , QMNT(4)/  0./
      DATA QLTP(1)/  0./ , QLTP(2)/  0./ , QLTP(3)/  0./ , QLTP(4)/  0./
      DATA QLEX(1)/  0./ , QLEX(2)/  0./ , QLEX(3)/  0./ , QLEX(4)/  0./
      DATA QLFL(1)/  0./ , QLFL(2)/  0./ , QLFL(3)/  0./ , QLFL(4)/  0./
      DATA QCIM(1)/  0./ , QCIM(2)/  0./ , QCIM(3)/  0./ , QCIM(4)/  0./
      DATA QCIE(1)/  0./ , QCIE(2)/  0./ , QCIE(3)/  0./ , QCIE(4)/  0./
      DATA RFNL(1)/  0./ , RFNL(2)/  0./ , RFNL(3)/  0./ , RFNL(4)/  0./
      DATA QLUA(1)/  0./ , QLUA(2)/  0./ , QLUA(3)/  0./ , QLUA(4)/  0./
C
C SMRL and ISLD are set by the routine AGINIT (which see, below).
C
C MWCL, MWCM, MWCE, MDLA, MWCD, and MWDQ are the minimum widths of label
C characters, mantissa characters, exponent characters, label-to-axis
C distances, dash-pattern characters, and dash-pattern spaces, respect-
C ively (in the plotter coordinate system).
C
      DATA MWCL /8/, MWCM /8/, MWCE /8/, MDLA /8/, MWCD /8/, MWDQ /8/
C
C INIF is an initialization flag, set non-zero to indicate that the
C routine AGINIT has been executed to set the values of AUTOGRAPH
C parameters which, for one reason or another, cannot be preset by
C this block data routine.
C
      DATA INIF / 0 /
C
C CHS1 and CHS2 are used within AUTOGRAPH when manipulating character
C strings retrieved by calls to AGGTCH.  They need not be preset.
C
C LNIC is the second dimension of the array (INCH) which holds an index
C of the character strings stored by AGSTCH.
C
      DATA LNIC / 50 /
C
C INCH is an index of character strings currently stored in CHRA.  Each
C entry has the following format:
C
C    INCH(1,I), if non-zero, is the index, in the array CHRA, of the
C    first character of the Ith character string.
C
C    INCH(2,I) is the length of the Ith character string.
C
      DATA (INCH(1,I),I=1,50) / 50*0 /
      DATA (INCH(2,I),I=1,50) / 50*0 /
C
C LNCA is the size of the array (CHRA) in which AGSTCH stores character
C strings.
C
      DATA LNCA / 2000 /
C
C INCA is the index of the last character used in CHRA.
C
      DATA INCA / 0 /
C
C CHRA holds character strings stored by AGSTCH.  It need not be pre-set
C to anything.
C
      END