Repatch (from linux) of OSX IRAF

1 files changed, 232 insertions, 0 deletions

diff --git a/noao/imred/crutil/doc/craverage.hlp b/noao/imred/crutil/doc/craverage.hlp
new file mode 100644
index 00000000..bd4ef7c9
--- /dev/null
+++ b/noao/imred/crutil/doc/craverage.hlp
@@ -0,0 +1,232 @@
+.help craverage Apr98 noao.imred.crutil
+.ih
+NAME
+craverage -- detect CRs and objects using average filter
+.ih
+SYNOPSIS
+\fBCraverage\fR detects cosmic rays and objects using a moving block
+average filter with the central pixel plus some number of additional high
+pixels  excluded and a median of an annulus around the block average box.
+It avoids identification of the cores of objects as cosmic rays by
+excluding pixels within the detected objects as cosmic ray candidates.
+.ih
+USAGE   
+.nf
+craverage input output
+.fi
+.ih
+PARAMETERS
+.ls input
+List of input images in which to detect cosmic rays and objects.
+.le
+.ls output
+List of output images in which cosmic rays are replaced by the block average
+value excluding the cosmic ray.  If no output image name is given then
+no output image will be created.
+.le
+.ls crmask = ""
+List of input and output cosmic ray and object masks.  If the mask exists
+then the mask values are used to exclude data pixels from the calculations
+and zero mask values are candidates for cosmic rays or objects.
+Detected cosmic rays and objects are identified in the mask with values
+given by the \fIcrval\fR and \fIobjval\fR parameters.  If no output cosmic
+ray mask is given then no mask will be created.
+.le
+.ls average = ""
+List of output block average filtered images.  If no image name is given
+then no image will be created.
+.le
+.ls sigma = ""
+List of output sigma images.  If no image name is given then no image
+will be created.
+.le
+
+.ls navg = 5 (minimum of 3)
+Square block average filter size given as the number of pixels along an
+edge.  The value will be rounded up to an odd value to be symmetrical
+around the center pixel excluded from the average.
+.le
+.ls nrej = 0 (minimum of 0)
+Number of additional highest pixels to exclude, in addition to the
+central pixel, in the block average.  The value should be small but it
+is needed to deal with cosmic rays that are bigger than a single pixel.
+.le
+.ls nbkg = 5 (minimum of 1)
+Background annulus width around the box average filter in pixels.  The
+median of the pixels in this annulus is used to estimate the background.
+.le
+.ls nsig = 25 (minimum of 10)
+Square box size for empirical sigma estimates given as the number of
+pixels along an edge.  The sigma is estimated using percentile points
+of the pixels in the box.  The size of the box should contain
+of order 100 pixels or more.
+.le
+.ls var0 = 0., var1 = 0., var2 = 0.
+Variance coefficients for the variance model.  The variance model is
+
+.nf
+    variance = var0 + var1 * data + var2 * data^2
+.fi
+
+where data is the maximum of zero and the average filtered pixel value and
+the variance is in data numbers.  All the coefficients must be positive or
+zero.  If they are all zero then empirical data sigmas are estimated by a
+percentile method in boxes of size given by \fInsig\fR.
+.le
+
+.ls crval = 1
+Mask value for detected cosmic rays.  It is legal for the value to be
+zero to not mark the cosmic rays in the output mask.
+.le
+.ls lcrsig = 10., hcrsig = 5.
+Low and high sigma factors for detecting cosmic rays.  These factors
+multiply the computed or estimated sigma at each pixel and these threshold
+values are compared to the difference between the candidate pixel and the
+block average filter value (average of box around the pixel).  This only
+applies to pixels where the block average filter value is within a
+specified threshold of the background estimate; i.e. the average value is
+not considered as part of an object.
+.le
+.ls crgrow = 0.
+Cosmic ray growing radius.  Pixels detected and marked in the output cosmic
+ray mask by the \fIcrval\fR value are increased in size in the mask (but
+not replaced in the output image) by also flagging all zero valued mask
+pixels within this specified radius with the cosmic ray mask value.  This
+is done after the detection phase is complete.  The separation between
+pixels is the distance between pixel centers computed as a real value.
+Note a value of at least one is required to affect other mask pixels.
+.le
+
+.ls objval = 0
+Mask value for detected objects.  It is legal for the value to be
+zero to not mark the objects in the output mask.
+.le
+.ls lobjsig = 10., hobjsig = 5.
+Low and high sigma factors for detecting objects.  These factors multiply
+the computed or estimated sigma at each pixel and these threshold values
+are compared to the difference between the block average filter value and
+the background annulus median.  If the values are made very large then
+object detection can be eliminated and cosmic rays will be detected
+everywhere.
+.le
+.ls objgrow = 0.
+Object detection growing radius.  Pixels detected and marked in the output
+mask by the \fIobjval\fR value are increased in size in the mask by also
+flagging all zero valued mask pixels within this specified radius with the
+cosmic ray mask value.  This is done after the detection phase is complete
+and so object grown pixels are not used in excluding cosmic ray
+candidates.  The separation between pixels is the distance between pixel
+centers computed as a real value.  Note a value of at least one is
+required to affect other mask pixels.
+.le
+.ih
+DESCRIPTION
+\fBCraverage\fR detects cosmic rays and objects using a moving block
+average filter with the central pixel and a specified number of additional
+highest pixels excluded and a median of an annulus around the block average
+box.  It avoids identification of the cores of objects as cosmic rays by
+excluding pixels within the detected objects as cosmic ray candidates.
+
+The block average filter computes the average of pixels in a box with the
+central or target pixel excluded.  In addition the \fInrej\fR parameter can
+be used to exclude that number of highest remaining pixels as possible
+contamination from cosmic rays which are larger than one pixel or possibly
+a very nearby additional cosmic ray.  The \fInrej\fR value should be kept
+small relative to the total number of pixels in the average so that the
+average will still be elevated over the median in real underlying objects.
+The resulting average is used as the prediction for the value of the target
+pixel.  The median of the pixels in a square background annulus around the
+block average box provides the prediction for the background at the target
+pixel.
+
+The target pixel is considered part of an object if the difference between
+the average value and the median background exceeds a specified threshold.
+If the pixel is NOT considered to be part of an object then if the
+difference between the pixel value and the average value exceeds a
+different specified threshold it is identified as a cosmic ray.
+
+The thresholds are defined in terms of sigma factors, which may be
+different for positive and negative deviations and for object and
+cosmic ray identification.  The sigma factors multiply an estimate
+for the statistical sigma of the target pixel.  The estimate is
+either based on a noise model or sigma of pixels in a box near the
+target pixel.
+
+The \fIcrmask\fR parameter specifies a pixel mask for the image.  If the
+mask exists then non-zero mask values will be used to exclude pixels from
+the average, background median, and empirical sigma estimates.  Also any
+pixels with non-zero mask values will not be altered either in the output
+image or in the final mask.  If the  mask does not exist then it behaves as
+if all mask values are zero.  If all pixels in the average box or median
+annulus are previously flagged then the estimates will be undefined and
+nothing will be done to the output image or mask.  Because the task can
+use an input mask to mark pixels not to be considered it can be used
+in an iterative fashion.
+
+The noise model is given by the formula
+
+.nf
+    variance = var0 + var1 * data + var2 * data^2
+.fi
+
+where data is the maximum of zero and the average estimate for the target
+pixel.  The coefficients are all given in terms of the data numbers.  This
+model can be related to common detector parameters.  For CCDs var0 is the
+readout noise expressed as a variance in data numbers and var1 is the
+inverse gain (DN/electrons).  The second order coefficient has the
+interpretation of flat field introduced variance.
+
+If all the coefficients are zero then an empirical sigma is estimated as
+follows.  The input image is divided into square blocks of size
+\fInsig\fR.  The (unmasked) pixel values in a block are sorted and the
+pixel values nearest the 15.9 and 84.1 percentiles are selected.  These are
+the one sigma points in a Gaussian distribution.  The sigma estimate is the
+difference of these two values divided by two.  This algorithm is used to
+avoid contamination of the sigma estimate by the bad pixel values.  The
+block size must be at least 10 pixels in each dimension to provide
+sufficient pixels for a good estimate of the percentile points.  The sigma
+estimate for a pixel is the sigma from the nearest block.  A moving box is
+not used for reasons of efficiency.
+
+If an output image name is specified then the output image is produced as a
+copy of the input image but with the identified cosmic ray pixels replaced
+by the average predicted value.  Other optional output images are
+the average filtered values and the sigma values.
+
+If a mask is specified the detected cosmic rays will be identified with
+values given by the \fIcrval\fR parameter and object pixels will be
+identified with values given by the \fIobjval\fR parameter.  Note that one
+does not need to use an output image and the cosmic rays can be replaced by
+interpolation in the data using the tasks \fIcrfix\fR, \fIfixpix\fR, or
+\fIccdproc\fR.
+
+One final step may be applied to the output mask.  The mask values
+identified with the \fIcrval\fR and \fIobjval\fR values may be grown
+by identifying pixel values within a specified radius with the same
+mask value.  Note that this step is done at the end and so any pixels
+in a preexisting input mask with the same values will also be grown.
+Also the grown pixels will not affect the output cosmic ray replaced
+image.  See \fIcrgrow\fR for a further discussion.
+.ih
+EXAMPLES
+This example illustrates using the \fBcraverage\fR task to
+create a mask with cosmic rays and objects identified and displayed.
+The image is a CCD image with a readout noise of 5 electrons
+and a gain of 3 electrons per data number.  This implies variance
+model coefficients of
+
+.nf
+    var0 = (5/3)^2 = 2.78
+    var1 = 1/3 = 0.34
+.fi
+
+.nf
+    cl> display obj001 1                  # Display in first frame
+    cl> craverage obj001 "" crmask=mask001 var0=2.78 var1=0.34\
+    >>> crval=1 objval=2
+    cl> display crobj001 2 overlay=mask001 ocol="1=green,2=red"
+.fi
+.ih
+SEE ALSO
+cosmicrays, crnebula, median, crfix, crgrow, crmedian
+.endhelp