Repatch (from linux) of OSX IRAF

1 files changed, 435 insertions, 0 deletions

diff --git a/pkg/images/immatch/doc/geomap.hlp b/pkg/images/immatch/doc/geomap.hlp
new file mode 100644
index 00000000..525e70b8
--- /dev/null
+++ b/pkg/images/immatch/doc/geomap.hlp
@@ -0,0 +1,435 @@
+.help geomap Jan01 images.immatch
+.ih
+NAME
+geomap -- compute one or more spatial transformation functions
+.ih
+USAGE
+geomap input database xmin xmax ymin ymax
+.ih
+PARAMETERS
+.ls input
+The list of text files containing the pixel coordinates of control points in
+the reference and input images. The control points are listed
+one per line with xref, yref, xin, and yin in columns 1 through 4 respectively.
+.le
+.ls database
+The name of the text file database where the computed transformations will
+be stored.
+.le
+.ls xmin, xmax, ymin, ymax
+The range of reference coordinates over which the computed coordinate
+transformation is valid. If the user is working in pixel units  these limits
+should normally be set to the values of the column and row limits of the
+reference image, e.g xmin = 1.0, xmax = 512, ymin= 1.0, ymax = 512 for
+a 512 x 512 image. The minimum and maximum xref and yref values in \fIinput\fR
+are used if xmin, xmax, ymin, or ymax are undefined.
+.le
+.ls transforms = ""
+An optional list of transform record names. If transforms is undefined 
+the database record(s) are assigned the names of the
+individual text files specified by \fIinput\fR.
+.le
+.ls results = ""
+Optional output files containing a summary of the results including a
+description of the transform geometry and a listing of the input coordinates,
+the fitted coordinates, and the fit residuals. The number of results files
+must be one or equal to the number of input files. If results is "STDOUT" the
+ results summary is printed on the standard output.
+.le
+.ls fitgeometry = "general"
+The fitting geometry to be used. The options are the following.
+.ls shift
+X and y shifts only are fit.
+.le
+.ls xyscale
+X and y shifts and x and y magnification factors are fit. Axis flips are
+allowed for.
+.le
+.ls rotate
+X and y shifts and a rotation angle are fit. Axis flips are allowed for.
+.le
+.ls rscale
+X and y shifts, a magnification factor assumed to be the same in x and y, and a
+rotation angle are fit. Axis flips are allowed for.
+.le
+.ls rxyscale
+X and y shifts, x and y magnifications factors, and a rotation angle are fit.
+Axis flips are allowed for.
+.le
+.ls general
+A polynomial of arbitrary order in x and y is fit. A linear term and a
+distortion term are computed separately. The linear term includes an x and y
+shift, an x and y scale factor, a rotation and a skew.  Axis flips are also
+allowed for in the linear portion of the fit. The distortion term consists
+of a polynomial fit to the residuals of the linear term. By default the
+distortion term is set to zero.
+.le
+
+For all the fitting geometries except "general" no distortion term is fit,
+i.e. the x and y polynomial orders are assumed to be 2 and the cross term
+switches are assumed to be "none", regardless of the values of the
+\fIxxorder\fR, \fIxyorder\fR, \fIxxterms\fR, \fIyxorder\fR, \fIyyorder\fR and
+\fIyxterms\fR parameters set by the user.
+.le
+.ls function = "polynomial"
+The type of analytic surface to be fit. The options are the following.
+.ls legendre
+Legendre polynomials in x and y.
+.le
+.ls chebyshev
+Chebyshev polynomials in x and y.
+.le
+.ls polynomial
+Power series in x and y.
+.le
+.le
+.ls xxorder = 2, xyorder = 2,  yxorder = 2, yyorder = 2
+The order of the polynomials in x and y for the x and y fits respectively.
+The default order and cross term settings define the linear term in x
+and y, where the 6 coefficients can be interpreted in terms of an x and y shift,
+an x and y scale change, and rotations of the x and y axes. The "shift",
+"xyscale", "rotation", "rscale", and "rxyscale", fitting geometries
+assume that the polynomial order parameters are 2 regardless of the values
+set by the user. If any of the order parameters are higher than 2 and
+\fIfitgeometry\fR is "general", then a distortion surface is fit to the
+residuals from the linear portion of the fit.
+.le
+.ls xxterms = "half", yxterms = "half"
+The options are:
+.ls none
+The individual polynomial terms contain powers of x or powers of y but not
+powers of both.
+.le
+.ls half
+The individual polynomial terms contain powers of x and powers of y, whose
+maximum combined power is max (xxorder - 1, xyorder - 1) for the x fit and
+max (yxorder - 1, yyorder - 1) for the y fit. 
+.le
+.ls full
+The individual polynomial terms contain powers of x and powers of y, whose
+maximum combined power is max (xxorder - 1, xyorder - 1) for the x fit and
+max (yxorder - 1, yyorder - 1) for the y fit.
+.le
+
+The "shift", "xyscale", "rotation", "rscale", and "rxyscale" fitting
+geometries, assume that the cross term switches are set to "none"
+regardless of the values set by the user.  If either of the cross terms
+parameters are set to "half" or "full" and \fIfitgeometry\fR is "general"
+then a distortion surface is fit to the residuals from the linear
+portion of the fit.
+.le
+.ls maxiter = 0
+The maximum number of rejection iterations. The default is no rejection.
+.le
+.ls reject = 3.0
+The rejection limit in units of sigma.
+.le
+.ls calctype = "real"
+The precision of the coordinate transformation calculations. The options are
+real and double.
+.le
+.ls verbose = yes
+Print messages about actions taken by the task ?
+.le
+.ls interactive = yes
+In interactive mode the user may interact with the fitting process, e.g.
+change the order of the fit, reject points, display the data, etc.
+.le
+.ls graphics = "stdgraph"
+The graphics device.
+.le
+.ls cursor = ""
+The graphics cursor.
+.le
+.ih
+DESCRIPTION
+
+GEOMAP computes the transformation required to map the reference coordinate
+system to the input coordinate system.  The coordinates of points in common
+to the two systems are listed in the input text file(s) \fIinput\fR
+one per line in the following format: "xref yref xin yin".
+
+The computed transforms are stored in the text database file \fIdatabase\fR
+in records with names specified by the parameter \fItransforms\fR. If the
+transforms parameter is undefined the records are assigned the name of
+the input coordinate files.
+
+The computed transformation has the form shown below, where the reference
+coordinates must be defined in the coordinate system of the reference image
+system if the user intends to resample an image with gregister or geotran, or
+transform coordinates from the reference coordinate system to the input
+image coordinate system. 
+
+.nf
+    xin = f (xref, yref)
+    yin = g (xref, yref)
+.fi
+
+If on the other hand the user wishes to transform coordinates from the
+input image coordinate system to the reference coordinate system then he or she
+must reverse the roles of the reference and input coordinates as defined above,
+and compute the inverse transformation.
+
+
+The functions f and g are either a power series polynomial or a Legendre or
+Chebyshev polynomial surface of order \fIxxorder\fR and \fIxyorder\fR in x
+and \fIyxorder\fR and \fIyyorder\fR in y.
+
+Several polynomial cross terms options are available. Options "none",
+"half", and "full" are illustrated below for a quadratic polynomial in
+x and y.
+
+.nf
+xxterms = "none", xyterms = "none"
+xxorder = 3, xyorder = 3, yxorder = 3, yyorder = 3
+
+   xin = a11 + a21 * xref + a12 * yref +
+         a31 * xref ** 2 + a13 * yref ** 2
+   yin = a11' + a21' * xref + a12' * yref +
+         a31' * xref ** 2 + a13' * yref ** 2
+
+xxterms = "half", xyterms = "half"
+xxorder = 3, xyorder = 3, yxorder = 3, yyorder = 3
+
+   xin = a11 + a21 * xref + a12 * yref +
+         a31 * xref ** 2 + a22 * xref * yref + a13 * yref ** 2
+   yin = a11' + a21' * xref + a12' * yref +
+         a31' * xref ** 2 + a22' * xref * yref + a13' * yref ** 2
+
+xxterms = "full", xyterms = "full"
+xxorder = 3, xyorder = 3, yxorder = 3, yyorder = 3
+
+   xin = a11 + a21 * xref + a31 * xref ** 2 +
+         a12 * yref + a22 * xref * yref +  a32 * xref ** 2 * yref +
+         a13 * yref ** 2 + a23 * xref *  yref ** 2 +
+         a33 * xref ** 2 * yref ** 2
+   yin = a11' + a21' * xref + a31' * xref ** 2 +
+         a12' * yref + a22' * xref * yref +  a32' * xref ** 2 * yref +
+         a13' * yref ** 2 + a23' * xref *  yref ** 2 +
+         a33' * xref ** 2 * yref ** 2
+.fi
+
+If the \fBfitgeometry\fR parameter is anything other than "general", the  order
+parameters assume the value 2 and the cross terms switches assume the value
+"none", regardless of the values set by the user. The computation can be done in
+either real or double precision by setting \fIcalctype\fR. Automatic pixel
+rejection may be enabled by setting \fmaxiter\fR > 0 and \fIreject\fR to some
+number greater than 0.
+
+\fIXmin\fR, \fIxmax\fR, \fIymin\fR and \fIymax\fR define the region of
+validity of the fit in the reference coordinate system and must be set by
+the user. These parameters can be used to reject out of range data before the
+actual fitting is done.
+
+GEOMAP may be run interactively by setting \fIinteractive\fR = yes and
+inputting commands by the use of simple keystrokes.
+In interactive mode the user has the option of changing the
+fit parameters and displaying the data graphically until a satisfactory
+fit has been achieved. The available keystroke commands are listed
+below.
+
+.nf
+?	Print options
+f	Fit the data and graph with the current graph type (g, x, r, y, s)
+g	Graph the data and the current fit
+x,r	Graph the x fit residuals versus x and y respectively
+y,s	Graph the y fit residuals versus x and y respectively
+d,u	Delete or undelete the data point nearest the cursor
+o	Overplot the next graph
+c	Toggle the constant x, y plotting option
+t       Plot a line of constant x, y through the nearest data point	
+l	Print xshift, yshift, xmag, ymag, xrotate, yrotate
+q	Exit the interactive curve fitting
+.fi
+
+The parameters listed below can be changed interactively with simple colon
+commands. Typing the parameter name alone will list the current value.
+
+.nf
+:show				List parameters
+:fitgeometry			Fitting geometry (shift,xyscale,rotate,
+				rscale,rxyscale,general)
+:function [value]	        Fitting function (chebyshev,legendre,
+                                polynomial)
+:xxorder :xyorder [value]	X fitting function xorder, yorder
+:yxorder :yyorder [value]	Y fitting function xorder, yorder
+:xxterms :yxterms [n/h/f]	X, Y fit cross terms type
+:maxiter [value]		Maximum number of rejection iterations
+:reject [value]			Rejection threshold
+.fi
+
+The final fit is stored in a simple text file in a format suitable for use
+by the GREGISTER or GEOTRAN tasks.
+
+If \fIverbose\fR  is "yes", various pieces of useful information are printed
+to the terminal as the task proceeds. If \fIresults\fR is set to a file name
+then the input coordinates, the fitted coordinates, and the residuals of
+the fit are written to that file.
+
+The transformation computed by the "general" fitting geometry is arbitrary
+and does not correspond to a physically meaningful model. However the computed
+coefficients for the linear term can be given a simple geometrical geometric
+interpretation for all the fitting geometries as shown below.
+
+.nf
+	fitting geometry = general (linear term)
+	    xin = a + b * xref + c * yref
+	    yin = d + e * xref + f * yref
+
+	fitting geometry = shift
+	    xin = a + xref
+	    yin = d + yref
+
+	fitting geometry = xyscale
+	    xin = a + b * xref
+	    yin = d + f * yref
+
+	fitting geometry = rotate
+	    xin = a + b * xref + c * yref
+	    yin = d + e * xref + f * yref
+	    b * f - c * e = +/-1
+	    b = f, c = -e or b = -f, c = e
+
+	fitting geometry = rscale
+	    xin = a + b * xref + c * yref
+	    yin = d + e * xref + f * yref
+	    b * f - c * e = +/- const
+	    b = f, c = -e or b = -f, c = e
+
+	fitting geometry = rxyscale
+	    xin = a + b * xref + c * yref
+	    yin = d + e * xref + f * yref
+	    b * f - c * e = +/- const
+.fi
+
+The coefficients can be interpreted as follows. Xref0, yref0, xin0, yin0
+are the origins in the reference and input frames respectively. Orientation
+and skew are the rotation of the x and y axes and their deviation from
+perpendicularity respectively. Xmag and ymag are the scaling factors in x and
+y and are assumed to be positive.
+
+.nf
+	general (linear term)
+	    xrotation = rotation - skew / 2
+	    yrotation = rotation + skew / 2
+	    b = xmag * cos (xrotation)
+	    c = ymag * sin (yrotation)
+	    e = -xmag * sin (xrotation)
+	    f = ymag * cos (yrotation)
+	    a = xin0 - b * xref0 - c * yref0 = xshift
+	    d = yin0 - e * xref0 - f * yref0 = yshift
+
+	shift
+	    xrotation = 0.0,  yrotation = 0.0
+	    xmag = ymag = 1.0
+	    b = 1.0
+	    c = 0.0
+	    e = 0.0
+	    f = 1.0
+	    a = xin0 - xref0 = xshift
+	    d = yin0 - yref0 = yshift
+
+	xyscale
+	    xrotation 0.0 / 180.0 yrotation = 0.0
+	    b = + /- xmag
+	    c = 0.0
+	    e = 0.0
+	    f = ymag
+	    a = xin0 - b * xref0 = xshift
+	    d = yin0 - f * yref0 = yshift
+
+	rscale
+	    xrotation = rotation + 0 / 180, yrotation = rotation
+	    mag = xmag = ymag
+	    const = mag * mag
+	    b = mag * cos (xrotation)
+	    c = mag * sin (yrotation)
+	    e = -mag * sin (xrotation)
+	    f = mag * cos (yrotation)
+	    a = xin0 - b * xref0 - c * yref0 = xshift
+	    d = yin0 - e * xref0 - f * yref0 = yshift
+
+	rxyscale
+	    xrotation = rotation + 0 / 180, yrotation = rotation
+	    const = xmag * ymag
+	    b = xmag * cos (xrotation)
+	    c = ymag * sin (yrotation)
+	    e = -xmag * sin (xrotation)
+	    f = ymag * cos (yrotation)
+	    a = xin0 - b * xref0 - c * yref0 = xshift
+	    d = yin0 - e * xref0 - f * yref0 = yshift
+.fi
+
+
+.ih
+EXAMPLES
+1. Compute the linear transformation between coordinate systems.
+   A record called "m51.coo" will be written in the database
+   file "database".
+
+
+.nf
+	cl> geomap m51.coo database 1. 512. 1. 512.
+.fi
+
+2. Compute the 3rd order transformation in x and y between two
+   coordinate systems.  A record called "m51.coo" will be written in
+   the database file "database". This record supersedes the one
+   of the same name written in example 1.
+
+.nf
+	cl> geomap m51.coo database 1. 512. 1. 512. xxo=4 xyo=4 \
+	>>> yxo=4 yyo=4 xxt=full yxt=full inter-
+.fi
+
+3. Register a 500 by 500 image of m51 to an 800 by 800 image of the same
+field taken with a different instrument, and display the original
+800 by 800 image and the transformed image. Use the default fitting parameters.
+
+.nf
+	cl> geomap m51.coo database 1.0 800.0 1.0 800.0
+	cl> gregister m51.500 m51.500.out database m51.coo
+	cl> display m51.800 1 fi+
+	cl> display m51.500.out 2 fi+
+.fi
+
+4. Use the above transform to transform a list of object pixel coordinates
+in the m51.800 image to their pixel coordinates in the m51.500 system.
+
+.nf
+	cl> geoxytran m51.800.xy m51.500.xy database m51.coo
+.fi
+
+5. Transform object pixel coordinates in the m51.500 image to their
+pixel coordinates in the m51.800 image. Note that to do this the roles
+of the reference and input coordinates defined in example 3 must be
+reversed and the inverse transform must be computed.
+
+.nf
+	cl> fields m51.coo 3,4,1,2 > m51.coo.inv
+	cl> geomap m51.coo.inv database 1.0 512.0 1.0 512.0
+	cl> geoxytran m51.512.xy m51.800.xy database m51.coo.inv
+.fi
+
+6. Compute 3 different transforms, store them in the same database file,
+and use them to transform 3 different images.  Use the original image names as
+the database record names.
+
+.nf
+	cl> geomap coo1,coo2,coo3 database 1. 512. 1. 512. \
+	>>> transforms=im1,im2,im3
+	cl> gregister im1,im2,im3  im1.out,im2.out,im3.out database \
+	>>> im1,im2,im3
+.fi
+
+.ih
+BUGS
+
+The user should be aware that for high order fits the "polynomial" basis
+functions become very unstable. Switching to the "legendre" or "chebyshev"
+polynomials and/or going to double precision will usually cure the problem.
+
+.ih
+SEE ALSO
+imshift, magnify, rotate, imlintran, gregister, geotran, geoxytran
+.endhelp