Repatch (from linux) of OSX IRAF

1 files changed, 1752 insertions, 0 deletions

diff --git a/pkg/images/immatch/src/geometry/geotran.x b/pkg/images/immatch/src/geometry/geotran.x
new file mode 100644
index 00000000..ee689d26
--- /dev/null
+++ b/pkg/images/immatch/src/geometry/geotran.x
@@ -0,0 +1,1752 @@
+# Copyright(c) 1986 Association of Universities for Research in Astronomy Inc.
+
+include <imhdr.h>
+include <imset.h>
+include <mach.h>
+include <math/gsurfit.h>
+include <math/iminterp.h>
+include "geotran.h"
+
+define	NMARGIN		3	# number of boundary pixels
+define	NMARGIN_SPLINE3	16	# number of spline boundary pixels
+
+# GEO_TRAN -- Correct an image for geometric distortion block by block using
+# fitted coordinates and image interpolation.
+
+procedure geo_tran (input, output, geo, sx1, sy1, sx2, sy2, nxblock, nyblock)
+
+pointer	input			#I pointer to input image
+pointer	output			#I pointer to output image
+pointer	geo			#I pointer to geotran structure
+pointer	sx1, sy1		#I pointers to linear surfaces
+pointer	sx2, sy2		#I pointers to higher order surfaces
+int	nxblock, nyblock	#I working block size
+
+int	l1, l2, c1, c2, nincr
+pointer	sp, xref, yref, msi
+real	shift
+real	gsgetr()
+
+begin
+	# Initialize the interpolant.
+	if (IM_NDIM(input) == 1) {
+	    call asitype (GT_INTERPSTR(geo), GT_INTERPOLANT(geo), GT_NSINC(geo),
+	        nincr, shift)
+	    call asisinit (msi, GT_INTERPOLANT(geo), GT_NSINC(geo), nincr,
+	        shift, 0.0)
+	} else {
+	    call msitype (GT_INTERPSTR(geo), GT_INTERPOLANT(geo),
+	        GT_NSINC(geo), nincr, shift)
+	    call msisinit (msi, GT_INTERPOLANT(geo), GT_NSINC(geo), nincr,
+	        nincr, shift, shift, 0.0)
+	}
+	call geo_margset (sx1, sy1, sx2, sy2, GT_XMIN(geo), GT_XMAX(geo),
+	    GT_NCOLS(geo), GT_YMIN(geo), GT_YMAX(geo), GT_NLINES(geo),
+	    GT_INTERPOLANT(geo), GT_NSINC(geo),  GT_NXYMARGIN(geo))
+
+	# Allocate working space.
+	call smark (sp)
+	call salloc (xref, GT_NCOLS(geo), TY_REAL)
+	call salloc (yref, GT_NLINES(geo), TY_REAL)
+
+	# Compute the reference coordinates corresponding to the center of
+	# the output image pixels.
+	call geo_ref (geo, Memr[xref], 1, GT_NCOLS(geo), GT_NCOLS(geo),
+	    Memr[yref], 1, GT_NLINES(geo), GT_NLINES(geo), gsgetr (sx1,
+	    GSXMIN), gsgetr (sx1, GSXMAX), gsgetr (sx1, GSYMIN), gsgetr (sx1,
+	    GSYMAX), GT_ONE)
+
+	# Configure the out-of-bounds pixel references for the input image.
+	call geo_imset (input, geo, sx1, sy1, sx2, sy2, Memr[xref],
+	        GT_NCOLS(geo), Memr[yref], GT_NLINES(geo))
+
+	# Loop over the line blocks.
+	for (l1 = 1; l1 <= GT_NLINES(geo); l1 = l1 + nyblock) {
+
+	    # Set line limits in the output image.
+	    l2 = min (l1 + nyblock - 1, GT_NLINES(geo)) 
+
+	    # Loop over the column blocks
+	    for (c1 = 1; c1 <= GT_NCOLS(geo); c1 = c1 + nxblock) {
+
+		# Set column limits in the output image.
+		c2 = min (c1 + nxblock - 1, GT_NCOLS(geo))
+
+		# Interpolate
+		call geo_gsvector (input, output, geo, msi, Memr[xref],
+		    c1, c2, Memr[yref], l1, l2, sx1, sy1, sx2, sy2)
+	    }
+	}
+
+	# Clean up.
+	if (IM_NDIM(input) == 1)
+	    call asifree (msi)
+	else
+	    call msifree (msi)
+	call sfree (sp)
+end
+
+
+# GEO_STRAN -- Correct an image for geometric distortion block by block using
+# interpolated coordinates and image interpolation.
+
+procedure geo_stran (input, output, geo, sx1, sy1, sx2, sy2, nxblock, nyblock)
+
+pointer	input			#I pointer to input image
+pointer	output			#I pointer to output image
+pointer	geo			#I pointer to geotran structure
+pointer	sx1, sy1		#I pointers to linear surfaces
+pointer	sx2, sy2		#I pointers to higher order surfaces
+int	nxblock, nyblock	#I working block size
+
+int	nxsample, nysample, ncols, nlines, l1, l2, c1, c2
+int	line1, line2, llast1, llast2, nincr
+pointer	sp, xsample, ysample, xinterp, yinterp
+pointer	xmsi, ymsi, jmsi, msi, xbuf, ybuf, jbuf
+real	shift
+real	gsgetr()
+
+begin
+	# Allocate working space and intialize the interpolant.
+	call smark (sp)
+	call salloc (xsample, GT_NCOLS(geo), TY_REAL)
+	call salloc (ysample, GT_NLINES(geo), TY_REAL)
+	call salloc (xinterp, GT_NCOLS(geo), TY_REAL)
+	call salloc (yinterp, GT_NLINES(geo), TY_REAL)
+
+	# Compute the sample size.
+	if (GT_NCOLS(geo) == 1)
+	    nxsample = 1
+	else
+	    nxsample = GT_NCOLS(geo) / GT_XSAMPLE(geo)
+	if (GT_NLINES(geo) == 1)
+	    nysample = 1
+	else
+	    nysample = GT_NLINES(geo) / GT_YSAMPLE(geo)
+
+	# Initialize interpolants.
+	if (IM_NDIM(input) == 1) {
+	    call asiinit (xmsi, II_LINEAR)
+	    call asiinit (ymsi, II_LINEAR)
+	    call asitype (GT_INTERPSTR(geo), GT_INTERPOLANT(geo),
+	        GT_NSINC(geo), nincr, shift)
+	    call asisinit (msi, GT_INTERPOLANT(geo), GT_NSINC(geo), nincr,
+	        shift, 0.0)
+	    if (GT_FLUXCONSERVE(geo) == YES)
+	        call asiinit (jmsi, II_LINEAR)
+	} else {
+	    call msiinit (xmsi, II_BILINEAR)
+	    call msiinit (ymsi, II_BILINEAR)
+	    call msitype (GT_INTERPSTR(geo), GT_INTERPOLANT(geo),
+	        GT_NSINC(geo), nincr, shift)
+	    call msisinit (msi, GT_INTERPOLANT(geo), GT_NSINC(geo), nincr,
+	        nincr, shift, shift, 0.0)
+	    if (GT_FLUXCONSERVE(geo) == YES)
+	        call msiinit (jmsi, II_BILINEAR)
+	}
+	call geo_margset (sx1, sy1, sx2, sy2, GT_XMIN(geo), GT_XMAX(geo),
+	    GT_NCOLS(geo), GT_YMIN(geo), GT_YMAX(geo), GT_NLINES(geo),
+	    GT_INTERPOLANT(geo), GT_NSINC(geo),  GT_NXYMARGIN(geo))
+
+	# Setup input image boundary extension parameters.
+	call geo_ref (geo, Memr[xsample], 1, GT_NCOLS(geo), GT_NCOLS(geo),
+	    Memr[ysample], 1, GT_NLINES(geo), GT_NLINES(geo), gsgetr (sx1,
+	    GSXMIN), gsgetr (sx1, GSXMAX), gsgetr (sx1, GSYMIN), gsgetr (sx1,
+	    GSYMAX), GT_ONE)
+	call geo_imset (input, geo, sx1, sy1, sx2, sy2, Memr[xsample],
+	    GT_NCOLS(geo), Memr[ysample], GT_NLINES(geo))
+
+	# Calculate the sampled reference coordinates and the interpolated
+	# reference coordinates.
+	call geo_ref (geo, Memr[xsample], 1, nxsample, nxsample, Memr[ysample],
+	    1, nysample, nysample, gsgetr (sx1, GSXMIN), gsgetr (sx1, GSXMAX),
+	    gsgetr (sx1, GSYMIN), gsgetr (sx1, GSYMAX), GT_ONE)
+	call geo_sample (geo, Memr[xinterp], 1, GT_NCOLS(geo), nxsample,
+	    Memr[yinterp], 1, GT_NLINES(geo), nysample, GT_ONE)
+
+	# Initialize the buffers.
+	xbuf = NULL
+	ybuf = NULL
+	jbuf = NULL
+
+	# Loop over the line blocks.
+	for (l1 = 1; l1 <= GT_NLINES(geo); l1 = l1 + nyblock) {
+
+	    # Set line limits in the output image.
+	    l2 = min (l1 + nyblock - 1, GT_NLINES(geo)) 
+	    nlines = l2 - l1 + 1
+
+	    # Line1 and line2 are the coordinates in the interpolation surface
+	    line1 = max (1, min (nysample - 1, int (Memr[yinterp+l1-1])))
+	    line2 = min (nysample, int (Memr[yinterp+l2-1] + 1.0))
+
+	    if ((xbuf == NULL) || (ybuf == NULL) || (jbuf == NULL) ||
+	        (line1 < llast1) || (line2 > llast2)) {
+		call geo_xbuffer (sx1, sx2, xmsi, Memr[xsample], Memr[ysample],
+		    1, nxsample, line1, line2, xbuf)
+		call geo_ybuffer (sy1, sy2, ymsi, Memr[xsample], Memr[ysample],
+		    1, nxsample, line1, line2, ybuf)
+	        if (GT_FLUXCONSERVE(geo) == YES) {
+		    if (IM_NDIM(input) == 1)
+		        call geo_jbuffer (sx1, NULL, sx2, NULL, jmsi,
+			    Memr[xsample], Memr[ysample], 1, nxsample,
+			    line1, line2, jbuf)
+		    else
+		        call geo_jbuffer (sx1, sy1, sx2, sy2, jmsi,
+			    Memr[xsample], Memr[ysample], 1, nxsample,
+			    line1, line2, jbuf)
+		}
+		llast1 = line1
+		llast2 = line2
+	    }
+
+
+	    # Loop over the column blocks.
+	    for (c1 = 1; c1 <= GT_NCOLS(geo); c1 = c1 + nxblock) {
+
+		# C1 and c2 are the column limits in the output image.
+		c2 = min (c1 + nxblock - 1, GT_NCOLS(geo))
+		ncols = c2 - c1 + 1
+
+		# Calculate the coordinates of the output pixels in the input
+		# image.
+		call geo_msivector (input, output, geo, xmsi, ymsi, jmsi, msi, 
+		    sx1, sy1, sx2, sy2, Memr[xinterp], c1, c2, nxsample,
+		    Memr[yinterp], l1, l2, nysample, 1, line1)
+	    }
+	}
+
+	# Free space.
+	if (IM_NDIM(input) == 1) {
+	    call asifree (xmsi)
+	    call asifree (ymsi)
+	    call asifree (msi)
+	    if (GT_FLUXCONSERVE(geo) == YES)
+	        call asifree (jmsi)
+	} else {
+	    call msifree (xmsi)
+	    call msifree (ymsi)
+	    call msifree (msi)
+	    if (GT_FLUXCONSERVE(geo) == YES)
+	        call msifree (jmsi)
+	}
+	call mfree (xbuf, TY_REAL)
+	call mfree (ybuf, TY_REAL)
+	if (GT_FLUXCONSERVE(geo) == YES)
+	    call mfree (jbuf, TY_REAL)
+	call sfree (sp)
+end
+
+
+# GEO_REF -- Determine the x and y coordinates at which the coordinate
+# surface will be subsampled.
+
+procedure geo_ref (geo, x, c1, c2, nx, y, l1, l2, ny, xmin, xmax, ymin, ymax,
+	cmode)
+
+pointer	geo		#I pointer to the geotran structure
+real	x[ARB]		#O output x sample coordinates
+int	c1, c2, nx	#I the column limits of the sampled array
+real	y[ARB]		#O output y sample coordinates
+int	l1, l2, ny	#I the line limits of the output coordinates
+real	xmin, xmax	#I limits on x coordinates
+real	ymin, ymax	#I limits on y coordinates
+int	cmode		#I coordinate computation mode
+
+int	i
+real	xtempmin, xtempmax, ytempmin, ytempmax, dx, dy
+
+begin
+
+	switch (cmode) {
+	case GT_FOUR:
+	    if (nx == 1) {
+	        xtempmin = min (xmax, max (xmin, GT_XMIN(geo)))
+	        xtempmax = min (xmax, max (xmin, GT_XMAX(geo)))
+		x[1] = xtempmin
+		x[2] = xtempmax
+		x[3] = xtempmax
+		x[4] = xtempmin
+	    } else if (nx == GT_NCOLS(geo)) {
+	        if (GT_XMIN(geo) > GT_XMAX(geo))
+		    dx = -GT_XSCALE(geo)
+	        else
+		    dx = GT_XSCALE(geo)
+	        do  i = c1, c2 {
+	            xtempmin = min (xmax, max (xmin, GT_XMIN(geo) +
+		        (i - 1.5) * dx))
+	            xtempmax = min (xmax, max (xmin, GT_XMIN(geo) +
+		        (i - 0.5) * dx))
+		    x[4*(i-c1)+1] = xtempmin
+		    x[4*(i-c1)+2] = xtempmax
+		    x[4*(i-c1)+3] = xtempmax
+		    x[4*(i-c1)+4] = xtempmin
+		}
+	    } else {
+	        if (GT_XMIN(geo) > GT_XMAX(geo))
+		    dx = -GT_XSCALE(geo) * (GT_NCOLS(geo) - 1.0) / (nx - 1.0)
+	        else
+		    dx = GT_XSCALE(geo) * (GT_NCOLS(geo) - 1.0) / (nx - 1.0)
+	        do  i = c1, c2 {
+	            xtempmin = min (xmax, max (xmin, GT_XMIN(geo) +
+		        (i - 1.5) * dx))
+	            xtempmax = min (xmax, max (xmin, GT_XMIN(geo) +
+		        (i - 0.5) * dx))
+		    x[4*(i-c1)+1] = xtempmin
+		    x[4*(i-c1)+2] = xtempmax
+		    x[4*(i-c1)+3] = xtempmax
+		    x[4*(i-c1)+4] = xtempmin 
+		}
+	    }
+
+	case GT_TWO:
+	    if (nx == 1) {
+	        xtempmin = min (xmax, max (xmin, GT_XMIN(geo)))
+	        xtempmax = min (xmax, max (xmin, GT_XMAX(geo)))
+		x[1] = xtempmin
+		x[2] = xtempmax
+	    } else if (nx == GT_NCOLS(geo)) {
+	        if (GT_XMIN(geo) > GT_XMAX(geo))
+		    dx = -GT_XSCALE(geo)
+	        else
+		    dx = GT_XSCALE(geo)
+	        do  i = c1, c2 {
+	            xtempmin = min (xmax, max (xmin, GT_XMIN(geo) +
+		        (i - 1.5) * dx))
+	            xtempmax = min (xmax, max (xmin, GT_XMIN(geo) +
+		        (i - 0.5) * dx))
+		    x[2*(i-c1)+1] = xtempmin
+		    x[2*(i-c1)+2] = xtempmax
+		}
+	    } else {
+	        if (GT_XMIN(geo) > GT_XMAX(geo))
+		    dx = -GT_XSCALE(geo) * (GT_NCOLS(geo) - 1.0) / (nx - 1.0)
+	        else
+		    dx = GT_XSCALE(geo) * (GT_NCOLS(geo) - 1.0) / (nx - 1.0)
+	        do  i = c1, c2 {
+	            xtempmin = min (xmax, max (xmin, GT_XMIN(geo) +
+		        (i - 1.5) * dx))
+	            xtempmax = min (xmax, max (xmin, GT_XMIN(geo) +
+		        (i - 0.5) * dx))
+		    x[2*(i-c1)+1] = xtempmin
+		    x[2*(i-c1)+2] = xtempmax
+		}
+	    }
+
+	case GT_ONE:
+	    if (nx == 1) {
+	        x[1] = min (xmax, max (xmin,
+		    (GT_XMIN(geo) + GT_XMAX(geo)) / 2.0))
+	    } else if (nx == GT_NCOLS(geo)) {
+	        if (GT_XMIN(geo) > GT_XMAX(geo))
+		    dx = -GT_XSCALE(geo)
+	        else
+		    dx = GT_XSCALE(geo)
+	        do  i = c1, c2
+	            x[i-c1+1] = min (xmax, max (xmin, GT_XMIN(geo) +
+		        (i - 1) * dx))
+	    } else {
+	        if (GT_XMIN(geo) > GT_XMAX(geo))
+		    dx = -GT_XSCALE(geo) * (GT_NCOLS(geo) - 1.0) / (nx - 1.0)
+	        else
+		    dx = GT_XSCALE(geo) * (GT_NCOLS(geo) - 1.0) / (nx - 1.0)
+	        do  i = c1, c2
+	            x[i-c1+1] = min (xmax, max (xmin, GT_XMIN(geo) +
+		        (i - 1) * dx))
+	    }
+
+	}
+
+	switch (cmode) {
+	case GT_FOUR:
+	    if (ny == 1) {
+	        ytempmin = min (ymax, max (ymin, GT_YMIN(geo)))
+	        ytempmax = min (ymax, max (ymin, GT_YMAX(geo)))
+		y[1] = ytempmin
+		y[2] = ytempmin
+		y[3] = ytempmax
+		y[4] = ytempmax
+	    } else if (ny == GT_NLINES(geo)) {
+	        if (GT_YMIN(geo) > GT_YMAX(geo))
+		    dy = -GT_YSCALE(geo)
+	        else
+		    dy = GT_YSCALE(geo)
+	        do i = l1, l2 {
+	            ytempmin = min (ymax, max (ymin, GT_YMIN(geo) +
+		        (i - 1.5) * dy))
+	            ytempmax = min (ymax, max (ymin, GT_YMIN(geo) +
+		        (i - 0.5) * dy))
+		    y[4*(i-l1)+1] = ytempmin
+		    y[4*(i-l1)+2] = ytempmin
+		    y[4*(i-l1)+3] = ytempmax
+		    y[4*(i-l1)+4] = ytempmax
+		}
+	    } else {
+	        if (GT_YMIN(geo) > GT_YMAX(geo))
+		    dy = -GT_YSCALE(geo) * (GT_NLINES(geo) - 1.0) / (ny - 1.0)
+	        else
+		    dy = GT_YSCALE(geo) * (GT_NLINES(geo) - 1.0) / (ny - 1.0)
+	        do i = l1, l2 {
+	            ytempmin = min (ymax, max (ymin, GT_YMIN(geo) +
+		        (i - 1.5) * dy))
+	            ytempmax = min (ymax, max (ymin, GT_YMIN(geo) +
+		        (i - 0.5) * dy))
+		    y[4*(i-l1)+1] = ytempmin
+		    y[4*(i-l1)+2] = ytempmin
+		    y[4*(i-l1)+3] = ytempmax
+		    y[4*(i-l1)+4] = ytempmax
+		}
+	    }
+
+	case GT_TWO:
+	    if (ny == 1) {
+	        ytempmin = min (ymax, max (ymin, GT_YMIN(geo)))
+	        ytempmax = min (ymax, max (ymin, GT_YMAX(geo)))
+		y[1] = ytempmin
+		y[2] = ytempmax
+	    } else if (ny == GT_NLINES(geo)) {
+	        if (GT_YMIN(geo) > GT_YMAX(geo))
+		    dy = -GT_YSCALE(geo)
+	        else
+		    dy = GT_YSCALE(geo)
+	        do i = l1, l2 {
+	            ytempmin = min (ymax, max (ymin, GT_YMIN(geo) +
+		        (i - 1.5) * dy))
+	            ytempmax = min (ymax, max (ymin, GT_YMIN(geo) +
+		        (i - 0.5) * dy))
+		    y[2*(i-l1)+1] = ytempmin
+		    y[2*(i-l1)+2] = ytempmax
+		}
+	    } else {
+	        if (GT_YMIN(geo) > GT_YMAX(geo))
+		    dy = -GT_YSCALE(geo) * (GT_NLINES(geo) - 1.0) / (ny - 1.0)
+	        else
+		    dy = GT_YSCALE(geo) * (GT_NLINES(geo) - 1.0) / (ny - 1.0)
+	        do i = l1, l2 {
+	            ytempmin = min (ymax, max (ymin, GT_YMIN(geo) +
+		        (i - 1.5) * dy))
+	            ytempmax = min (ymax, max (ymin, GT_YMIN(geo) +
+		        (i - 0.5) * dy))
+		    y[2*(i-l1)+1] = ytempmin
+		    y[2*(i-l1)+2] = ytempmax
+		}
+	    }
+	case GT_ONE:
+	    if (ny == 1) {
+	        y[1] = min (ymax, max (ymin,
+		    (GT_YMIN(geo) + GT_YMAX(geo)) / 2.0))
+	    } else if (ny == GT_NLINES(geo)) {
+	        if (GT_YMIN(geo) > GT_YMAX(geo))
+		    dy = -GT_YSCALE(geo)
+	        else
+		    dy = GT_YSCALE(geo)
+	        do i = l1, l2
+	            y[i-l1+1] = min (ymax, max (ymin, GT_YMIN(geo) +
+		        (i - 1) * dy))
+	    } else {
+	        if (GT_YMIN(geo) > GT_YMAX(geo))
+		    dy = -GT_YSCALE(geo) * (GT_NLINES(geo) - 1.0) / (ny - 1.0)
+	        else
+		    dy = GT_YSCALE(geo) * (GT_NLINES(geo) - 1.0) / (ny - 1.0)
+	        do i = l1, l2
+	            y[i-l1+1] = min (ymax, max (ymin, GT_YMIN(geo) +
+		        (i - 1) * dy))
+	    }
+
+	}
+end
+
+
+# GEO_SAMPLE -- Calculate the sampled reference points.
+
+procedure geo_sample (geo, xref, c1, c2, nxsample, yref, l1, l2, nysample,
+	cmode)
+
+pointer	geo			#I pointer to geotran structure
+real	xref[ARB]		#O x reference values
+int	c1, c2, nxsample	#I limits and number of sample points in x
+real	yref[ARB]		#O y reference values
+int	l1, l2, nysample	#I limits and number of sample points in y
+int	cmode			#I coordinate computation mode
+
+int	i
+real	xtempmin, xtempmax, ytempmin, ytempmax
+
+begin
+	switch (cmode) {
+	case GT_FOUR:
+	    if (GT_NCOLS(geo) == 1) {
+	        xref[1] = 0.5
+		xref[2] = 1.5
+		xref[3] = 1.5
+		xref[4] = 0.5
+	    } else {
+		do i = c1, c2 {
+	            xtempmin = min (real (nxsample), max (1.,
+		        real ((nxsample - 1) * (i - 0.5) + (GT_NCOLS(geo) -
+			nxsample)) / (GT_NCOLS(geo) - 1)))
+	            xtempmax = min (real (nxsample), max (1.,
+		        real ((nxsample - 1) * (i + 0.5) + (GT_NCOLS(geo) -
+			nxsample)) / (GT_NCOLS(geo) - 1)))
+		    xref[4*(i-c1)+1] = xtempmin
+		    xref[4*(i-c1)+2] = xtempmax
+		    xref[4*(i-c1)+3] = xtempmax
+		    xref[4*(i-c1)+4] = xtempmin
+		}
+
+	    }
+	case GT_TWO:
+	    if (GT_NCOLS(geo) == 1) {
+	        xref[1] = 0.5
+		xref[2] = 1.5
+	    } else {
+		do i = c1, c2 {
+	            xtempmin = min (real (nxsample), max (1.,
+		        real ((nxsample - 1) * (i - 0.5) + (GT_NCOLS(geo) -
+			nxsample)) / (GT_NCOLS(geo) - 1)))
+	            xtempmax = min (real (nxsample), max (1.,
+		        real ((nxsample - 1) * (i + 0.5) + (GT_NCOLS(geo) -
+			nxsample)) / (GT_NCOLS(geo) - 1)))
+		    xref[2*(i-c1)+1] = xtempmin
+		    xref[2*(i-c1)+2] = xtempmax
+		}
+	    }
+	case GT_ONE:
+	    if (GT_NCOLS(geo) == 1)
+	        xref[1] = 1.0
+	    else {
+	        do i = c1, c2
+	            xref[i-c1+1] = min (real (nxsample), max (1.,
+		        real ((nxsample - 1) * i + (GT_NCOLS(geo) -
+			nxsample)) / (GT_NCOLS(geo) - 1)))
+	    }
+	}
+
+	switch (cmode) {
+	case GT_FOUR:
+	    if (GT_NLINES(geo) == 1) {
+	        yref[1] = 0.5
+		yref[2] = 0.5
+		yref[3] = 1.5
+		yref[4] = 1.5
+	    } else {
+	        do i = l1, l2 {
+	            ytempmin = min (real (nysample), max (1.,
+		        real ((nysample - 1) * (i - 0.5) + (GT_NLINES(geo) -
+			nysample)) / (GT_NLINES(geo) - 1)))
+	            ytempmax = min (real (nysample), max (1.,
+		        real ((nysample - 1) * (i + 0.5) + (GT_NLINES(geo) -
+			nysample)) / (GT_NLINES(geo) - 1)))
+		    yref[4*(i-l1)+1] = ytempmin
+		    yref[4*(i-l1)+2] = ytempmin
+		    yref[4*(i-l1)+3] = ytempmax
+		    yref[4*(i-l1)+4] = ytempmax
+		}
+	    }
+	case GT_TWO:
+	    if (GT_NLINES(geo) == 1) {
+	        yref[1] = 0.5
+		yref[2] = 1.5
+	    } else {
+	        do i = l1, l2 {
+	            ytempmin = min (real (nysample), max (1.,
+		        real ((nysample - 1) * (i - 0.5) + (GT_NLINES(geo) -
+			nysample)) / (GT_NLINES(geo) - 1)))
+	            ytempmax = min (real (nysample), max (1.,
+		        real ((nysample - 1) * (i + 0.5) + (GT_NLINES(geo) -
+			nysample)) / (GT_NLINES(geo) - 1)))
+		    yref[2*(i-l1)+1] = ytempmin
+		    yref[2*(i-l1)+2] = ytempmax
+		}
+	    }
+	case GT_ONE:
+	    if (GT_NLINES(geo) == 1)
+	        yref[1] = 1.0
+	    else {
+	        do i = l1, l2
+	            yref[i-l1+1] = min (real (nysample), max (1.,
+		        real ((nysample - 1) * i + (GT_NLINES(geo) -
+			nysample)) / (GT_NLINES(geo) - 1)))
+	    }
+	}
+end
+
+
+# GEO_XBUFFER -- Compute the x interpolant and coordinates.
+
+procedure geo_xbuffer (s1, s2,  msi, xsample, ysample, c1, c2, l1, l2, buf)
+
+pointer	s1, s2		#I pointers to the x surface
+pointer	msi		#I interpolant
+real	xsample[ARB]	#I sampled x reference coordinates
+real	ysample[ARB]	#I sampled y reference coordinates
+int	c1, c2		#I columns of interest in sampled image
+int	l1, l2		#I lines of interest in the sampled image
+pointer	buf		#I pointer to output buffer
+
+int	i, ncols, nlines, llast1, llast2, nclast, nllast
+pointer	sp, sf, y, z, buf1, buf2
+
+begin
+	ncols = c2 - c1 + 1
+	nlines = l2 - l1 + 1
+
+	# Combine surfaces.
+	if (s2 == NULL)
+	    call gscopy (s1, sf)
+	else
+	    call gsadd (s1, s2, sf)
+
+	# Allocate working space.
+	call smark (sp)
+	call salloc (y, ncols, TY_REAL)
+	call salloc (z, ncols, TY_REAL)
+
+	# If buffer undefined then allocate memory for the buffer. Reallocate
+	# the buffer if the number of lines or columns changes.
+	if (buf ==  NULL) {
+	    call malloc (buf, ncols * nlines, TY_REAL)
+	    llast1 = l1 - nlines
+	    llast2 = l2 - nlines
+	} else if ((nlines != nllast) || (ncols != nclast)) {
+	    call realloc (buf, ncols * nlines, TY_REAL)
+	    llast1 = l1 - nlines
+	    llast2 = l2 - nlines
+	}
+
+	# Compute the coordinates.
+	if (l1 < llast1) {
+	    do i = l2, l1, -1 {
+		if (i > llast1)
+		    buf1 = buf + (i - llast1) * ncols
+		else {
+		    buf1 = z
+		    call amovkr (ysample[i], Memr[y], ncols)
+		    call gsvector (sf, xsample[c1], Memr[y], Memr[buf1], ncols)
+		}
+		buf2 = buf + (i - l1) * ncols
+		call amovr (Memr[buf1], Memr[buf2], ncols)
+	    }
+	} else if (l2 > llast2) {
+	    do i = l1, l2 {
+		if (i < llast2)
+		    buf1 = buf + (i - llast1) * ncols
+		else {
+		    buf1 = z
+		    call amovkr (ysample[i], Memr[y], ncols)
+		    call gsvector (sf, xsample[c1], Memr[y], Memr[buf1], ncols)
+		}
+		buf2 = buf + (i - l1) * ncols
+		call amovr (Memr[buf1], Memr[buf2], ncols)
+	    }
+	}
+
+	llast1 = l1
+	llast2 = l2
+	nclast = ncols
+	nllast = nlines
+
+	# Fit the interpolant.
+	if (nlines == 1)
+	    call asifit (msi, Memr[buf], ncols)
+	else
+	    call msifit (msi, Memr[buf], ncols, nlines, ncols)
+
+	call gsfree (sf)
+	call sfree (sp)
+end
+
+
+# GEO_YBUFFER -- Compute the y interpolant and coordinates.
+
+procedure geo_ybuffer (s1, s2,  msi, xsample, ysample, c1, c2, l1, l2, buf)
+
+pointer	s1, s2		#I pointers to the y surface
+pointer	msi		#I interpolant
+real	xsample[ARB]	#I sampled x reference coordinates
+real	ysample[ARB]	#I sampled y reference coordinates
+int	c1, c2		#I columns of interest in sampled image
+int	l1, l2		#I lines of interest in the sampled image
+pointer	buf		#I pointer to output buffer
+
+int	i, ncols, nlines, llast1, llast2, nclast, nllast
+pointer	sp, sf, y, z, buf1, buf2
+
+begin
+	ncols = c2 - c1 + 1
+	nlines = l2 - l1 + 1
+
+	# Combine surfaces.
+	if (s2 == NULL)
+	    call gscopy (s1, sf)
+	else
+	    call gsadd (s1, s2, sf)
+
+	# Allocate working space.
+	call smark (sp)
+	call salloc (y, ncols, TY_REAL)
+	call salloc (z, ncols, TY_REAL)
+
+	# If buffer undefined then allocate memory for the buffer. Reallocate
+	# the buffer if the number of lines or columns changes.
+	if (buf ==  NULL) {
+	    call malloc (buf, ncols * nlines, TY_REAL)
+	    llast1 = l1 - nlines
+	    llast2 = l2 - nlines
+	} else if ((nlines != nllast) || (ncols != nclast)) {
+	    call realloc (buf, ncols * nlines, TY_REAL)
+	    llast1 = l1 - nlines
+	    llast2 = l2 - nlines
+	}
+
+	# Compute the coordinates.
+	if (l1 < llast1) {
+	    do i = l2, l1, -1 {
+		if (i > llast1)
+		    buf1 = buf + (i - llast1) * ncols
+		else {
+		    buf1 = z
+		    call amovkr (ysample[i], Memr[y], ncols)
+		    call gsvector (sf, xsample[c1], Memr[y], Memr[buf1], ncols)
+		}
+		buf2 = buf + (i - l1) * ncols
+		call amovr (Memr[buf1], Memr[buf2], ncols)
+	    }
+	} else if (l2 > llast2) {
+	    do i = l1, l2 {
+		if (i < llast2)
+		    buf1 = buf + (i - llast1) * ncols
+		else {
+		    buf1 = z
+		    call amovkr (ysample[i], Memr[y], ncols)
+		    call gsvector (sf, xsample[c1], Memr[y], Memr[buf1], ncols)
+		}
+		buf2 = buf + (i - l1) * ncols
+		call amovr (Memr[buf1], Memr[buf2], ncols)
+	    }
+	}
+
+	llast1 = l1
+	llast2 = l2
+	nclast = ncols
+	nllast = nlines
+
+	# Fit the interpolant.
+	if (nlines == 1)
+	    call asifit (msi, Memr[buf], ncols)
+	else
+	    call msifit (msi, Memr[buf], ncols, nlines, ncols)
+
+	call gsfree (sf)
+	call sfree (sp)
+end
+
+
+# GEO_JBUFFER -- Fit the jacobian surface.
+
+procedure geo_jbuffer (sx1, sy1, sx2, sy2, jmsi, xsample, ysample, c1, c2, l1,
+        l2, jbuf)
+
+pointer	sx1, sy1	#I pointers to the linear surfaces
+pointer	sx2, sy2	#I pointers to the distortion surfaces
+pointer	jmsi		#I interpolant
+real	xsample[ARB]	#I sampled x reference coordinates
+real	ysample[ARB]	#I sampled y reference coordinates
+int	c1, c2		#I columns of interest in sampled image
+int	l1, l2		#I lines of interest in the sampled image
+pointer	jbuf		#I pointer to output buffer
+
+int	i, ncols, nlines, llast1, llast2, nclast, nllast
+pointer	sp, sx, sy, y, z, buf1, buf2
+
+begin
+	ncols = c2 - c1 + 1
+	nlines = l2 - l1 + 1
+
+	# Combine surfaces.
+	if (sx2 == NULL)
+	    call gscopy (sx1, sx)
+	else
+	    call gsadd (sx1, sx2, sx)
+	if (sy1 == NULL)
+	    sy = NULL
+	else if (sy2 == NULL)
+	    call gscopy (sy1, sy)
+	else
+	    call gsadd (sy1, sy2, sy)
+
+	call smark (sp)
+	call salloc (y, ncols, TY_REAL)
+	call salloc (z, ncols, TY_REAL)
+
+	# If buffer undefined then allocate memory for the buffer. Reallocate
+	# the buffer if the number of lines or columns changes.
+	if (jbuf ==  NULL) {
+	    call malloc (jbuf, ncols * nlines, TY_REAL)
+	    llast1 = l1 - nlines
+	    llast2 = l2 - nlines
+	} else if ((nlines != nllast) || (ncols != nclast)) {
+	    call realloc (jbuf, ncols * nlines, TY_REAL)
+	    llast1 = l1 - nlines
+	    llast2 = l2 - nlines
+	}
+
+	# Compute surface.
+	if (l1 < llast1) {
+	    do i = l2, l1, -1 {
+		if (i > llast1)
+		    buf1 = jbuf + (i - llast1) * ncols
+		else {
+		    buf1 = z
+		    call amovkr (ysample[i], Memr[y], ncols)
+		    call geo_jgsvector (sx, sy, xsample[c1], Memr[y],
+		        Memr[buf1], ncols)
+		}
+		buf2 = jbuf + (i - l1) * ncols
+		call amovr (Memr[buf1], Memr[buf2], ncols)
+	    }
+	} else if (l2 > llast2) {
+	    do i = l1, l2 {
+		if (i < llast2)
+		    buf1 = jbuf + (i - llast1) * ncols
+		else {
+		    buf1 = z
+		    call amovkr (ysample[i], Memr[y], ncols)
+		    call geo_jgsvector (sx, sy, xsample[c1], Memr[y],
+		        Memr[buf1], ncols)
+		}
+		buf2 = jbuf + (i - l1) * ncols
+		call amovr (Memr[buf1], Memr[buf2], ncols)
+	    }
+	}
+
+	# Update buffer pointers.
+	llast1 = l1
+	llast2 = l2
+	nclast = ncols
+	nllast = nlines
+
+	# Fit the interpolant.
+	if (nlines == 1)
+	    call asifit (jmsi, Memr[jbuf], ncols)
+	else
+	    call msifit (jmsi, Memr[jbuf], ncols, nlines, ncols)
+
+	call gsfree (sx)
+	call gsfree (sy)
+	call sfree (sp)
+end
+
+
+# GEO_JGSVECTOR -- Procedure to compute the Jacobian of the transformation.
+
+procedure geo_jgsvector (sx, sy, x, y, out, ncols)
+
+pointer	sx, sy			#I surface descriptors
+real	x[ARB]			#I x values
+real	y[ARB]			#I y values
+real	out[ARB]		#O output values
+int	ncols			#I number of points
+
+pointer	sp, der1, der2
+
+begin
+	call smark (sp)
+
+	if (sy == NULL) {
+	    call gsder (sx, x, y, out, ncols, 1, 0)
+	} else {
+	    call salloc (der1, ncols, TY_REAL)
+	    call salloc (der2, ncols, TY_REAL)
+	    call gsder (sx, x, y, Memr[der1], ncols, 1, 0)
+	    call gsder (sy, x, y, Memr[der2], ncols, 0, 1)
+	    call amulr (Memr[der1], Memr[der2], out, ncols)
+	    call gsder (sx, x, y, Memr[der1], ncols, 0, 1)
+	    call gsder (sy, x, y, Memr[der2], ncols, 1, 0)
+	    call amulr (Memr[der1], Memr[der2], Memr[der1], ncols)
+	    call asubr (out, Memr[der1], out, ncols)
+	}
+
+	call sfree (sp)
+end
+
+
+# GEO_MSIVECTOR -- Procedure to interpolate the surface coordinates
+
+procedure geo_msivector (in, out, geo, xmsi, ymsi, jmsi, msi, sx1, sy1, sx2,
+        sy2, xref, c1, c2, nxsample, yref, l1, l2, nysample, x0, y0)
+
+pointer	in		#I pointer to input image
+pointer	out		#I pointer to output image
+pointer	geo		#I pointer to geotran structure
+pointer	xmsi, ymsi	#I pointer to the interpolation cord surfaces
+pointer	jmsi		#I pointer to Jacobian surface
+pointer	msi		#I pointer to interpolation surface
+pointer	sx1, sy1	#I pointers to linear surfaces
+pointer	sx2, sy2	#I pointer to higher order surfaces
+real	xref[ARB]	#I x reference coordinates
+int	c1, c2		#I column limits in output image
+int	nxsample	#I the x sample size
+real	yref[ARB]	#I y reference coordinates
+int	l1, l2		#I line limits in output image
+int	nysample	#I the y sample size
+int	x0, y0		#I zero points of interpolation coordinates
+
+int	j, ncols, nlines, ncols4, nlines4
+int	imc1, imc2, iml1, iml2, nicols, nilines
+pointer	sp, txref, tyref, x, y, xin, yin, inbuf, outbuf 
+real	xmin, xmax, ymin, ymax, factor
+pointer	imgs1r(), imgs2r(), imps1r(), imps2r()
+real	geo_jfactor()
+
+begin
+	ncols = c2 - c1 + 1
+	nlines = l2 - l1 + 1
+
+	# Find min max of interpolation coords.
+	if (IM_NDIM(in) == 1)
+	    call geo_iminmax (xref, yref, c1, c2, l1, l2, x0, 0,
+	        xmsi, ymsi, xmin, xmax, ymin, ymax)
+	else
+	    call geo_iminmax (xref, yref, c1, c2, l1, l2, x0, y0,
+	        xmsi, ymsi, xmin, xmax, ymin, ymax)
+
+	# Get the appropriate image section and fit the interpolant.
+	imc1 = int(xmin) - GT_NXYMARGIN(geo)
+	if (imc1 <= 0)
+	    imc1 = imc1 - 1
+	imc2 = nint (xmax) + GT_NXYMARGIN(geo) + 1
+	nicols = imc2 - imc1 + 1
+	if (IM_NDIM(in) == 1) {
+	    ncols4 = 2 * ncols
+	    nlines4 = 2 * nlines
+	    iml1 = 1
+	    iml2 = 1
+	    nilines = 1
+	    inbuf = imgs1r (in, imc1, imc2)
+	    if (inbuf == EOF)
+	        call error (0, "Error reading image")
+	    call asifit (msi, Memr[inbuf], nicols)
+	} else {
+	    ncols4 = 4 * ncols
+	    nlines4 = 4 * nlines
+	    iml1 = int(ymin) - GT_NXYMARGIN(geo)
+	    if (iml1 <= 0)
+	        iml1 = iml1 - 1
+	    iml2 = nint (ymax) + GT_NXYMARGIN(geo) + 1
+	    nilines = iml2 - iml1 + 1
+	    inbuf = imgs2r (in, imc1, imc2, iml1, iml2)
+	    if (inbuf == EOF)
+	        call error (0, "Error reading image")
+	    call msifit (msi, Memr[inbuf], nicols, nilines, nicols)
+	}
+
+	# Allocate working space.
+	call smark (sp)
+	if (GT_INTERPOLANT(geo) == II_DRIZZLE || GT_INTERPOLANT(geo) ==
+	    II_BIDRIZZLE) {
+	    call salloc (txref, ncols4, TY_REAL)
+	    call salloc (tyref, nlines4, TY_REAL)
+	    call salloc (x, ncols4, TY_REAL)
+	    call salloc (y, ncols4, TY_REAL)
+	    call salloc (xin, ncols4, TY_REAL)
+	    call salloc (yin, ncols4, TY_REAL)
+	    if (IM_NDIM(in) == 1)
+	        call geo_sample (geo, Memr[txref], c1, c2, nxsample,
+		    Memr[tyref], l1, l2, nysample, GT_TWO)
+	    else
+	        call geo_sample (geo, Memr[txref], c1, c2, nxsample,
+		    Memr[tyref], l1, l2, nysample, GT_FOUR)
+	    call aaddkr (Memr[txref], real (-x0 + 1), Memr[x], ncols4)
+	} else {
+	    call salloc (x, ncols, TY_REAL)
+	    call salloc (y, ncols, TY_REAL)
+	    call salloc (xin, ncols, TY_REAL)
+	    call salloc (yin, ncols, TY_REAL)
+	    call aaddkr (xref[c1], real (-x0 + 1), Memr[x], ncols)
+	}
+
+	# Compute the output buffer.
+	do j = l1, l2 {
+
+	    # Write the output image.
+	    if (IM_NDIM(in) == 1)
+	        outbuf = imps1r (out, c1, c2)
+	    else
+	        outbuf = imps2r (out, c1, c2, j, j)
+	    if (outbuf == EOF)
+		call error (0, "Error writing output image")
+
+	    # Compute the interpolation coordinates.
+	    if (GT_INTERPOLANT(geo) == II_DRIZZLE || GT_INTERPOLANT(geo) ==
+	        II_BIDRIZZLE) {
+	        if (IM_NDIM(in) == 1) {
+		    call asivector (xmsi, Memr[x], Memr[xin], ncols4)
+		    call amovkr (1.0, Memr[yin], ncols4)
+	        } else {
+	            #call amovkr (yref[j] + real (-y0 + 1), Memr[y], ncols)
+		    call geo_repeat (Memr[tyref+4*(j-l1)], 4, Memr[y], ncols)
+		    call aaddkr (Memr[y], real(-y0 + 1), Memr[y], ncols4)
+	            call msivector (xmsi, Memr[x], Memr[y], Memr[xin], ncols4)
+	            call msivector (ymsi, Memr[x], Memr[y], Memr[yin], ncols4)
+	        }
+	        if (imc1 != 1)
+		    call aaddkr (Memr[xin], real (-imc1 + 1), Memr[xin], ncols4)
+	        if (iml1 != 1)
+		    call aaddkr (Memr[yin], real (-iml1 + 1), Memr[yin], ncols4)
+	    } else {
+	        if (IM_NDIM(in) == 1) {
+		    call asivector (xmsi, Memr[x], Memr[xin], ncols)
+		    call amovkr (1.0, Memr[yin], ncols)
+	        } else {
+	            call amovkr (yref[j] + real (-y0 + 1), Memr[y], ncols)
+	            call msivector (xmsi, Memr[x], Memr[y], Memr[xin], ncols)
+	            call msivector (ymsi, Memr[x], Memr[y], Memr[yin], ncols)
+	        }
+	        if (imc1 != 1)
+		    call aaddkr (Memr[xin], real (-imc1 + 1), Memr[xin], ncols)
+	        if (iml1 != 1)
+		    call aaddkr (Memr[yin], real (-iml1 + 1), Memr[yin], ncols)
+	    }
+
+	    # Interpolate in the input image.
+	    if (IM_NDIM(in) == 1)
+	        call asivector (msi, Memr[xin], Memr[outbuf], ncols)
+	    else
+	        call msivector (msi, Memr[xin], Memr[yin], Memr[outbuf], ncols)
+
+	    # Preserve flux in image.
+	    if (GT_FLUXCONSERVE(geo) == YES) {
+		factor = GT_XSCALE(geo) * GT_YSCALE(geo)
+		if (GT_GEOMODE(geo) == GT_LINEAR || (sx2 == NULL && sy2 ==
+		    NULL)) {
+		    if (IM_NDIM(in) == 1)
+		        call amulkr (Memr[outbuf], factor * geo_jfactor (sx1,
+			    NULL), Memr[outbuf], ncols)
+		    else
+		        call amulkr (Memr[outbuf], factor * geo_jfactor (sx1,
+			    sy1), Memr[outbuf], ncols)
+		} else {
+		    if (IM_NDIM(in) == 1)
+		        call geo_msiflux (jmsi, xref, yref, Memr[outbuf],
+			    c1, c2, 0, x0, y0)
+		    else
+		        call geo_msiflux (jmsi, xref, yref, Memr[outbuf],
+			    c1, c2, j, x0, y0)
+		    call amulkr (Memr[outbuf], factor, Memr[outbuf], ncols)
+		}
+	    }
+	}
+
+	call sfree (sp)
+end
+
+
+# GEO_GSVECTOR -- Evaluate the output image pixels using fitted coordinate
+# values and image interpolation.
+
+procedure geo_gsvector (input, output, geo, msi, xref, c1, c2, yref, l1, l2,
+        sx1, sy1, sx2, sy2)
+
+pointer	input			#I pointer to input image
+pointer	output			#I pointer to output image
+pointer	geo			#I pointer to geotran structure
+pointer	msi			#I pointer to interpolant
+real	xref[ARB]		#I x reference array
+int	c1, c2			#I columns of interest in output image
+real	yref[ARB]		#I y reference array
+int	l1, l2			#I lines of interest in the output image
+pointer	sx1, sy1		#I linear surface descriptors
+pointer	sx2, sy2		#I distortion surface descriptors
+
+int	j, ncols, nlines, ncols4, nlines4, nicols, nilines
+int	imc1, imc2, iml1, iml2
+pointer	sp, txref, tyref, y, xin, yin, temp, inbuf, outbuf
+real	xmin, xmax, ymin, ymax, factor
+pointer	imgs1r(), imgs2r(), imps1r(), imps2r()
+real	gsgetr(), geo_jfactor()
+
+begin
+	# Compute the number of columns.
+	ncols = c2 - c1 + 1
+	nlines = l2 - l1 + 1
+
+	# Compute the maximum and minimum coordinates.
+	call geo_minmax (xref, yref, c1, c2, l1, l2, sx1, sy1, sx2, sy2,
+	    xmin, xmax, ymin, ymax)
+
+	# Get the appropriate image section and fill the buffer.
+	imc1 = int(xmin) - GT_NXYMARGIN(geo)
+	if (imc1 <= 0)
+	    imc1 = imc1 - 1
+	imc2 = nint (xmax) + GT_NXYMARGIN(geo) + 1
+	nicols = imc2 - imc1 + 1
+	if (IM_NDIM(input) == 1) {
+	    iml1 = 1
+	    iml2 = 1
+	    nilines = 1
+	    ncols4 = 2 * ncols
+	    nlines4 = 2 * nlines
+	    inbuf = imgs1r (input, imc1, imc2)
+	    if (inbuf == EOF)
+	        call error (0, "Error reading image")
+	    call asifit (msi, Memr[inbuf], nicols)
+	} else {
+	    iml1 = int(ymin) - GT_NXYMARGIN(geo)
+	    if (iml1 <= 0)
+	        iml1 = iml1 - 1
+	    iml2 = nint (ymax) + GT_NXYMARGIN(geo) + 1
+	    nilines = iml2 - iml1 + 1
+	    ncols4 = 4 * ncols
+	    nlines4 = 4 * nlines
+	    inbuf = imgs2r (input, imc1, imc2, iml1, iml2)
+	    if (inbuf == EOF)
+	        call error (0, "Error reading image")
+	    call msifit (msi, Memr[inbuf], nicols, nilines, nicols)
+	}
+
+	# Allocate working space.
+	call smark (sp)
+	if (GT_INTERPOLANT(geo) == II_DRIZZLE || GT_INTERPOLANT(geo) ==
+		II_BIDRIZZLE) {
+	    call salloc (txref, ncols4, TY_REAL)
+	    call salloc (tyref, nlines4, TY_REAL)
+	    call salloc (y, ncols4, TY_REAL)
+	    call salloc (xin, ncols4, TY_REAL)
+	    call salloc (yin, ncols4, TY_REAL)
+	    call salloc (temp, ncols4, TY_REAL)
+	    if (IM_NDIM(input) == 1)
+	        call geo_ref (geo, Memr[txref], c1, c2, GT_NCOLS(geo),
+	            Memr[tyref], l1, l2, GT_NLINES(geo), gsgetr (sx1, GSXMIN),
+	            gsgetr (sx1, GSXMAX), gsgetr (sx1, GSYMIN), gsgetr (sx1,
+	            GSYMAX), GT_TWO)
+	    else
+	        call geo_ref (geo, Memr[txref], c1, c2, GT_NCOLS(geo),
+	            Memr[tyref], l1, l2, GT_NLINES(geo), gsgetr (sx1, GSXMIN),
+	            gsgetr (sx1, GSXMAX), gsgetr (sx1, GSYMIN), gsgetr (sx1,
+	            GSYMAX), GT_FOUR)
+	} else {
+	    call salloc (y, ncols, TY_REAL)
+	    call salloc (xin, ncols, TY_REAL)
+	    call salloc (yin, ncols, TY_REAL)
+	    call salloc (temp, ncols, TY_REAL)
+	}
+
+	# Compute the pixels.
+	do j = l1, l2 {
+
+	    # Get output image buffer.
+	    if (IM_NDIM(input) == 1)
+	        outbuf = imps1r (output, c1, c2)
+	    else
+	        outbuf = imps2r (output, c1, c2, j, j)
+	    if (output == EOF)
+		call error (0, "Error writing output image")
+
+	    # Compute the interpolation coordinates.
+	    if (GT_INTERPOLANT(geo) == II_DRIZZLE || GT_INTERPOLANT(geo) ==
+		II_BIDRIZZLE) {
+
+		# Set the y coordinate.
+	        if (IM_NDIM(input) == 1)
+	            call geo_repeat (Memr[tyref+2*(j-l1)], 2, Memr[y], ncols)
+		else
+	            call geo_repeat (Memr[tyref+4*(j-l1)], 4, Memr[y], ncols)
+
+	        # Fit x coords.
+	        call gsvector (sx1, Memr[txref], Memr[y], Memr[xin], ncols4)
+	        if (sx2 != NULL) {
+		    call gsvector (sx2, Memr[txref], Memr[y], Memr[temp],
+		        ncols4)
+		    call aaddr (Memr[xin], Memr[temp], Memr[xin], ncols4)
+	        }
+	        if (imc1 != 1)
+		    call aaddkr (Memr[xin], real (-imc1 + 1), Memr[xin], ncols4)
+
+	        # Fit y coords.
+	        call gsvector (sy1, Memr[txref], Memr[y], Memr[yin], ncols4)
+	        if (sy2 != NULL) {
+		    call gsvector (sy2, Memr[txref], Memr[y], Memr[temp],
+		        ncols4)
+		    call aaddr (Memr[yin], Memr[temp], Memr[yin], ncols4)
+	        }
+	        if (iml1 != 1)
+		    call aaddkr (Memr[yin], real (-iml1 + 1), Memr[yin], ncols4)
+
+	    } else {
+
+		# Set the y coordinate.
+	        call amovkr (yref[j], Memr[y], ncols)
+
+	        # Fit x coords.
+	        call gsvector (sx1, xref[c1], Memr[y], Memr[xin], ncols)
+	        if (sx2 != NULL) {
+		    call gsvector (sx2, xref[c1], Memr[y], Memr[temp], ncols)
+		    call aaddr (Memr[xin], Memr[temp], Memr[xin], ncols)
+	        }
+	        if (imc1 != 1)
+		    call aaddkr (Memr[xin], real (-imc1 + 1), Memr[xin], ncols)
+
+	        # Fit y coords.
+	        call gsvector (sy1, xref[c1], Memr[y], Memr[yin], ncols)
+	        if (sy2 != NULL) {
+		    call gsvector (sy2, xref[c1], Memr[y], Memr[temp], ncols)
+		    call aaddr (Memr[yin], Memr[temp], Memr[yin], ncols)
+	        }
+	        if (iml1 != 1)
+		    call aaddkr (Memr[yin], real (-iml1 + 1), Memr[yin], ncols)
+	    }
+
+	    # Interpolate in input image.
+	    if (IM_NDIM(input) == 1)
+	        call asivector (msi, Memr[xin], Memr[outbuf], ncols)
+	    else
+	        call msivector (msi, Memr[xin], Memr[yin], Memr[outbuf], ncols)
+
+	    # Preserve flux in image.
+	    if (GT_FLUXCONSERVE(geo) == YES) {
+		factor = GT_XSCALE(geo) * GT_YSCALE(geo)
+		if (GT_GEOMODE(geo) == GT_LINEAR || (sx2 == NULL && sy2 ==
+		    NULL)) {
+		    if (IM_NDIM(input) == 1)
+		        call amulkr (Memr[outbuf], factor * geo_jfactor (sx1,
+			    NULL), Memr[outbuf], ncols)
+		    else
+		        call amulkr (Memr[outbuf], factor * geo_jfactor (sx1,
+			    sy1), Memr[outbuf], ncols)
+		} else {
+		    if (IM_NDIM(input) == 1)
+		        call geo_gsflux (xref, yref, Memr[outbuf], c1, c2, j,
+		            sx1, NULL, sx2, NULL)
+		    else
+		        call geo_gsflux (xref, yref, Memr[outbuf], c1, c2, j,
+		            sx1, sy1, sx2, sy2)
+		    call amulkr (Memr[outbuf], factor, Memr[outbuf], ncols)
+		}
+	    }
+	}
+
+	call sfree (sp)
+end
+
+
+# GEO_IMINMAX -- Find minimum and maximum interpolation coordinates.
+
+procedure geo_iminmax (xref, yref, c1, c2, l1, l2, x0, y0, xmsi, ymsi, xmin,
+        xmax, ymin, ymax)
+
+real	xref[ARB]		#I x reference coords
+real	yref[ARB]		#I y reference coords
+int	c1, c2			#I columns limits
+int	l1, l2			#I line limits
+int	x0, y0			#I interpolation coord zero points
+pointer	xmsi, ymsi		#I coord surfaces
+real	xmin, xmax		#O output xmin and xmax
+real	ymin, ymax		#O output ymin and ymax
+
+int	j, ncols
+pointer	sp, x, y, xin, yin
+real	mintemp, maxtemp, x1, x2, y1, y2
+real	asieval(), msieval()
+
+begin
+	call smark (sp)
+	ncols = c2 - c1 + 1
+	call salloc (x, ncols, TY_REAL)
+	call salloc (y, ncols, TY_REAL)
+	call salloc (xin, ncols, TY_REAL)
+	call salloc (yin, ncols, TY_REAL)
+
+	xmin = MAX_REAL
+	xmax = -MAX_REAL
+	ymin = MAX_REAL
+	ymax = -MAX_REAL
+
+	# find the minimum and maximum
+	do j = l1, l2 {
+
+	    if (j == l1 || j == l2) {
+
+		call aaddkr (xref[c1], real (-x0 + 1), Memr[x], ncols)
+		if (y0 <= 0) {
+		    call asivector (xmsi, Memr[x], Memr[xin], ncols)
+		    ymin = 1.0
+		    ymax = 1.0
+		} else {
+	            call amovkr (yref[j] + real (-y0 + 1), Memr[y], ncols)
+		    call msivector (xmsi, Memr[x], Memr[y], Memr[xin], ncols)
+		    call msivector (ymsi, Memr[x], Memr[y], Memr[yin], ncols)
+		    call alimr (Memr[yin], ncols, mintemp, maxtemp)
+		    ymin = min (ymin, mintemp)
+		    ymax = max (ymax, maxtemp)
+		}
+		call alimr (Memr[xin], ncols, mintemp, maxtemp)
+		xmin = min (xmin, mintemp)
+		xmax = max (xmax, maxtemp)
+	    } else {
+		if (y0 <= 0) {
+		    x1 = asieval (xmsi, xref[c1] + real (-x0 + 1))
+		    x2 = asieval (xmsi, xref[c1+ncols-1] + real (-x0 + 1))
+		    ymin = 1.0
+		    ymax = 1.0
+		} else {
+		    x1 = msieval (xmsi, xref[c1] + real (-x0 + 1),
+		        yref[j] + real (-y0 + 1))
+		    x2 = msieval (xmsi, xref[c1+ncols-1] + real (-x0 + 1),
+		        yref[j] + real (-y0 + 1))
+		    y1 = msieval (ymsi, xref[c1] + real (-x0 + 1),
+		        yref[j]  + real (-y0 + 1))
+		    y2 = msieval (ymsi, xref[c1+ncols-1] + real (-x0 + 1),
+		        yref[j] + real (-y0 + 1))
+		    ymin = min (ymin, y1, y2)
+		    ymax = max (ymax, y1, y2)
+		}
+		xmin = min (xmin, x1, x2)
+		xmax = max (xmax, x1, x2)
+
+	    }
+	}
+
+	call sfree (sp)
+
+end
+
+
+# GEO_MINMAX -- Compute the minimum and maximum fitted coordinates.
+
+procedure geo_minmax (xref, yref, c1, c2, l1, l2, sx1, sy1, sx2, sy2,
+	xmin, xmax, ymin, ymax)
+
+real	xref[ARB]		#I x reference coords
+real	yref[ARB]		#I y reference coords
+int	c1, c2			#I columns limits
+int	l1, l2			#I line limits
+pointer	sx1, sy1		#I linear surface descriptors
+pointer	sx2, sy2		#I distortion surface descriptors
+real	xmin, xmax		#O output xmin and xmax
+real	ymin, ymax		#O output ymin and ymax
+
+int	j, ncols
+pointer	sp, y, xin, yin, temp
+real	x1, x2, y1, y2, mintemp, maxtemp
+real	gseval()
+
+begin
+	call smark (sp)
+	ncols = c2 - c1 + 1
+	call salloc (y, ncols, TY_REAL)
+	call salloc (xin, ncols, TY_REAL)
+	call salloc (yin, ncols, TY_REAL)
+	call salloc (temp, ncols, TY_REAL)
+
+	xmin = MAX_REAL
+	xmax = -MAX_REAL
+	ymin = MAX_REAL
+	ymax = -MAX_REAL
+
+	# Find the maximum and minimum coordinates.
+	do j = l1, l2 {
+
+	    if (j == l1 || j == l2) {
+
+	        call amovkr (yref[j], Memr[y], ncols)
+	        call gsvector (sx1, xref[c1], Memr[y], Memr[xin], ncols)
+	        if (sx2 != NULL) {
+		    call gsvector (sx2, xref[c1], Memr[y], Memr[temp], ncols)
+		    call aaddr (Memr[xin], Memr[temp], Memr[xin], ncols)
+	        }
+	        call gsvector (sy1, xref[c1], Memr[y], Memr[yin], ncols)
+	        if (sy2 != NULL) {
+		    call gsvector (sy2, xref[c1], Memr[y], Memr[temp], ncols)
+		    call aaddr (Memr[yin], Memr[temp], Memr[yin], ncols)
+		}
+
+		call alimr (Memr[xin], ncols, mintemp, maxtemp)
+		xmin = min (xmin, mintemp)
+		xmax = max (xmax, maxtemp)
+		call alimr (Memr[yin], ncols, mintemp, maxtemp)
+		ymin = min (ymin, mintemp)
+		ymax = max (ymax, maxtemp)
+
+	    } else {
+
+		x1 = gseval (sx1, xref[c1], yref[j])
+		x2 = gseval (sx1, xref[c1+ncols-1], yref[j])
+		if (sx2 != NULL) {
+		    x1 = x1 + gseval (sx2, xref[c1], yref[j])
+		    x2 = x2 + gseval (sx2, xref[c1+ncols-1], yref[j])
+		}
+		xmin = min (xmin, x1, x2)
+		xmax = max (xmax, x1, x2)
+
+		y1 = gseval (sy1, xref[c1], yref[j])
+		y2 = gseval (sy1, xref[c1+ncols-1], yref[j])
+		if (sy2 != NULL) {
+		    y1 = y1 + gseval (sy2, xref[c1], yref[j])
+		    y2 = y2 + gseval (sy2, xref[c1+ncols-1], yref[j])
+		}
+		ymin = min (ymin, y1, y2)
+		ymax = max (ymax, y1, y2)
+
+	    }
+	}
+
+	call sfree (sp)
+end
+
+
+# GEO_MARGSET -- Set up interpolation margin
+
+procedure geo_margset (sx1, sy1, sx2, sy2, xmin, xmax, ncols, ymin, ymax,
+	nlines, interpolant, nsinc, nxymargin)
+
+pointer	sx1, sy1		#I linear surface descriptors
+pointer	sx2, sy2		#I distortion surface descriptors
+real	xmin, xmax		#I the reference coordinate x limits
+int	ncols			#I the number of output image columns
+real	ymin, ymax		#I the reference coordinate y limits
+int	nlines			#I the number of output image lines
+int	interpolant		#I the interpolant type
+int	nsinc			#I the sinc width
+int	nxymargin		#O the interpolation margin
+
+int	dist1, dist2, dist3, dist4, dist5, dist6
+pointer	newsx, newsy
+real	x1, y1, x2, y2
+real	gseval()
+
+begin
+	if (interpolant == II_SPLINE3 || interpolant == II_BISPLINE3) {
+	    nxymargin = NMARGIN_SPLINE3
+	} else if (interpolant == II_LSINC || interpolant == II_BILSINC) {
+	    nxymargin = nsinc
+	} else if (interpolant == II_SINC || interpolant == II_BISINC) {
+	    nxymargin = nsinc
+	} else if (interpolant == II_DRIZZLE || interpolant == II_BIDRIZZLE) {
+	    if (sx2 == NULL)
+		call gscopy (sx1, newsx)
+	    else
+		call gsadd (sx1, sx2, newsx)
+	    if (sy2 == NULL)
+		call gscopy (sy1, newsy)
+	    else
+		call gsadd (sy1, sy2, newsy)
+	    x1 = gseval (newsx, xmin, ymin)
+	    y1 = gseval (newsy, xmin, ymin)
+	    x2 = gseval (newsx, xmax, ymin)
+	    y2 = gseval (newsy, xmax, ymin)
+	    dist1 = sqrt ((x1 - x2) ** 2 + (y1 - y2) ** 2) / ncols
+	    x1 = gseval (newsx, xmax, ymax)
+	    y1 = gseval (newsy, xmax, ymax)
+	    dist2 = sqrt ((x1 - x2) ** 2 + (y1 - y2) ** 2) / nlines
+	    x2 = gseval (newsx, xmin, ymax)
+	    y2 = gseval (newsy, xmin, ymax)
+	    dist3 = sqrt ((x1 - x2) ** 2 + (y1 - y2) ** 2) / ncols
+	    x1 = gseval (newsx, xmin, ymin)
+	    y1 = gseval (newsy, xmin, ymin)
+	    dist4 = sqrt ((x1 - x2) ** 2 + (y1 - y2) ** 2) / nlines
+	    x1 = gseval (newsx, xmin, (ymin + ymax) / 2.0)
+	    y1 = gseval (newsy, xmin, (ymin + ymax) / 2.0)
+	    x2 = gseval (newsx, xmax, (ymin + ymax) / 2.0)
+	    y2 = gseval (newsy, xmax, (ymin + ymax) / 2.0)
+	    dist5 = sqrt ((x1 - x2) ** 2 + (y1 - y2) ** 2) / ncols
+	    x1 = gseval (newsx, (xmin + xmax) / 2.0, ymin)
+	    y1 = gseval (newsy, (xmin + xmax) / 2.0, ymin)
+	    x2 = gseval (newsx, (xmin + xmax) / 2.0, ymax)
+	    y2 = gseval (newsy, (xmin + xmax) / 2.0, ymax)
+	    dist6 = sqrt ((x1 - x2) ** 2 + (y1 - y2) ** 2) / nlines
+	    nxymargin = max (NMARGIN, dist1, dist2, dist3, dist4,
+	        dist5, dist6)
+	    call gsfree (newsx)
+	    call gsfree (newsy)
+	} else {
+	    nxymargin = NMARGIN
+	}
+end
+
+
+# GEO_IMSET -- Set up input image boundary conditions.
+
+procedure geo_imset (im, geo, sx1, sy1, sx2, sy2, xref, nx, yref, ny)
+
+pointer	im			#I pointer to image
+pointer	geo			#I pointer to geotran structure
+pointer	sx1, sy1		#I linear surface descriptors
+pointer	sx2, sy2		#I distortion surface descriptors
+real	xref[ARB]		#I x reference coordinates
+int	nx			#I number of x reference coordinates
+real	yref[ARB]		#I y reference coordinates
+int	ny			#I number of y reference coordinates
+
+int	bndry, npts
+pointer	sp, x1, x2, y1, y2, xtemp, ytemp
+real	xn1, xn2, xn3, xn4, yn1, yn2, yn3, yn4, xmin, xmax, ymin, ymax
+real	gseval()
+
+begin
+	npts = max (nx, ny)
+
+	xn1 = gseval (sx1, GT_XMIN(geo), GT_YMIN(geo))
+	xn2 = gseval (sx1, GT_XMAX(geo), GT_YMIN(geo))
+	xn3 = gseval (sx1, GT_XMAX(geo), GT_YMAX(geo))
+	xn4 = gseval (sx1, GT_XMIN(geo), GT_YMAX(geo))
+
+	yn1 = gseval (sy1, GT_XMIN(geo), GT_YMIN(geo))
+	yn2 = gseval (sy1, GT_XMAX(geo), GT_YMIN(geo))
+	yn3 = gseval (sy1, GT_XMAX(geo), GT_YMAX(geo))
+	yn4 = gseval (sy1, GT_XMIN(geo), GT_YMAX(geo))
+
+	xmin = min (xn1, xn2, xn3, xn4)
+	ymin = min (yn1, yn2, yn3, yn4)
+	xmax = max (xn1, xn2, xn3, xn4)
+	ymax = max (yn1, yn2, yn3, yn4)
+
+	if (sx2 != NULL) {
+	    call smark (sp)
+	    call salloc (x1, npts, TY_REAL)
+	    call salloc (x2, npts, TY_REAL)
+	    call salloc (xtemp, npts, TY_REAL)
+	    call salloc (ytemp, npts, TY_REAL)
+
+	    call amovkr (GT_YMIN(geo), Memr[ytemp], nx) 
+	    call gsvector (sx1, xref, Memr[ytemp], Memr[x1], nx)
+	    call gsvector (sx2, xref, Memr[ytemp], Memr[x2], nx)
+	    call aaddr (Memr[x1], Memr[x2], Memr[x1], nx)
+	    call alimr (Memr[x1], nx, xn1, yn1)
+
+	    call amovkr (GT_XMAX(geo), Memr[xtemp], ny) 
+	    call gsvector (sx1, Memr[xtemp], yref, Memr[x1], ny)
+	    call gsvector (sx2, Memr[xtemp], yref, Memr[x2], ny)
+	    call aaddr (Memr[x1], Memr[x2], Memr[x1], ny)
+	    call alimr (Memr[x1], ny, xn2, yn2)
+
+	    call amovkr (GT_YMAX(geo), Memr[ytemp], nx) 
+	    call gsvector (sx1, xref, Memr[ytemp], Memr[x1], nx)
+	    call gsvector (sx2, xref, Memr[ytemp], Memr[x2], nx)
+	    call aaddr (Memr[x1], Memr[x2], Memr[x1], nx)
+	    call alimr (Memr[x1], nx, xn3, yn3)
+
+	    call amovkr (GT_XMIN(geo), Memr[xtemp], ny) 
+	    call gsvector (sx1, Memr[xtemp], yref, Memr[x1], ny)
+	    call gsvector (sx2, Memr[xtemp], yref, Memr[x2], ny)
+	    call aaddr (Memr[x1], Memr[x2], Memr[x1], ny)
+	    call alimr (Memr[x1], ny, xn4, yn4)
+
+	    xmin = min (xn1, xn2, xn3, xn4)
+	    xmax = max (yn1, yn2, yn3, yn4)
+
+	    call sfree (sp)
+	}
+
+	if (sy2 != NULL) {
+	    call smark (sp)
+	    call salloc (y1, npts, TY_REAL)
+	    call salloc (y2, npts, TY_REAL)
+	    call salloc (xtemp, npts, TY_REAL)
+	    call salloc (ytemp, npts, TY_REAL)
+
+	    call amovkr (GT_YMIN(geo), Memr[ytemp], nx) 
+	    call gsvector (sy1, xref, Memr[ytemp], Memr[y1], nx)
+	    call gsvector (sy2, xref, Memr[ytemp], Memr[y2], nx)
+	    call aaddr (Memr[y1], Memr[y2], Memr[y1], nx)
+	    call alimr (Memr[y1], nx, xn1, yn1)
+
+	    call amovkr (GT_XMAX(geo), Memr[xtemp], ny) 
+	    call gsvector (sy1, Memr[xtemp], yref, Memr[y1], ny)
+	    call gsvector (sy2, Memr[xtemp], yref, Memr[y2], ny)
+	    call aaddr (Memr[y1], Memr[y2], Memr[y1], ny)
+	    call alimr (Memr[y1], ny, xn2, yn2)
+
+	    call amovkr (GT_YMAX(geo), Memr[ytemp], nx) 
+	    call gsvector (sy1, xref, Memr[ytemp], Memr[y1], nx)
+	    call gsvector (sy2, xref, Memr[ytemp], Memr[y2], nx)
+	    call aaddr (Memr[y1], Memr[y2], Memr[y1], nx)
+	    call alimr (Memr[y1], nx, xn3, yn3)
+
+	    call amovkr (GT_XMIN(geo), Memr[xtemp], ny) 
+	    call gsvector (sy1, Memr[xtemp], yref, Memr[y1], ny)
+	    call gsvector (sy2, Memr[xtemp], yref, Memr[y2], ny)
+	    call aaddr (Memr[y1], Memr[y2], Memr[y1], ny)
+	    call alimr (Memr[y1], ny, xn4, yn4)
+
+	    ymin = min (xn1, xn2, xn3, xn4)
+	    ymax = max (yn1, yn2, yn3, yn4)
+
+	    call sfree (sp)
+	}
+
+	# Compute the out-of-bounds limit.
+	if (IM_NDIM(im) == 1) {
+	    if (xmin < 1.0 || xmax > real (IM_LEN(im,1)))
+	        bndry = max (1.0 - xmin, xmax - IM_LEN(im,1)) + 1
+	    else
+	        bndry = 1
+	} else {
+	    if (xmin < 1.0 || ymin < 1.0 || xmax > real (IM_LEN(im,1)) ||
+	        ymax > real (IM_LEN(im,2)))
+	        bndry = max (1.0 - xmin, 1.0 - ymin, xmax - IM_LEN(im,1),
+		    ymax - IM_LEN(im,2)) + 1
+	    else
+	        bndry = 1
+	}
+
+	call imseti (im, IM_NBNDRYPIX, bndry + GT_NXYMARGIN(geo) + 1)
+	call imseti (im, IM_TYBNDRY, GT_BOUNDARY(geo))
+	call imsetr (im, IM_BNDRYPIXVAL, GT_CONSTANT(geo))
+end
+
+
+# GEO_GSFLUX -- Preserve the image flux after a transformation.
+
+procedure geo_gsflux (xref, yref, buf, c1, c2, line, sx1, sy1, sx2, sy2)
+
+real	xref[ARB]		#I x reference coordinates
+real	yref[ARB]		#I y reference coordinates
+real	buf[ARB]		#O output image buffer
+int	c1, c2			#I column limits in the output image
+int	line			#I line in the output image
+pointer	sx1, sy1		#I linear surface descriptors
+pointer	sx2, sy2		#I distortion surface descriptors
+
+int	ncols
+pointer	sp, y, der1, der2, jacob, sx, sy
+
+begin
+	ncols = c2 - c1 + 1
+
+	# Get the reference coordinates.
+	call smark (sp)
+	call salloc (y, ncols, TY_REAL)
+	call salloc (jacob, ncols, TY_REAL)
+
+	# Add the two surfaces together for efficiency.
+	if (sx2 != NULL)
+	    call gsadd (sx1, sx2, sx)
+	else
+	    call gscopy (sx1, sx)
+	if (sy1 == NULL)
+	    sy = NULL
+	else if (sy2 != NULL)
+	    call gsadd (sy1, sy2, sy)
+	else
+	    call gscopy (sy1, sy)
+
+	# Multiply the output buffer by the Jacobian.
+	call amovkr (yref[line], Memr[y], ncols)
+	if (sy == NULL)
+	    call gsder (sx, xref[c1], Memr[y], Memr[jacob], ncols, 1, 0)
+	else {
+	    call salloc (der1, ncols, TY_REAL)
+	    call salloc (der2, ncols, TY_REAL)
+	    call gsder (sx, xref[c1], Memr[y], Memr[der1], ncols, 1, 0)
+	    call gsder (sy, xref[c1], Memr[y], Memr[der2], ncols, 0, 1)
+	    call amulr (Memr[der1], Memr[der2], Memr[jacob], ncols)
+	    call gsder (sx, xref[c1], Memr[y], Memr[der1], ncols, 0, 1) 
+	    call gsder (sy, xref[c1], Memr[y], Memr[der2], ncols, 1, 0)
+	    call amulr (Memr[der1], Memr[der2], Memr[der1], ncols)
+	    call asubr (Memr[jacob], Memr[der1], Memr[jacob], ncols)
+	}
+	call aabsr (Memr[jacob], Memr[jacob], ncols)
+	call amulr (buf, Memr[jacob], buf, ncols)
+
+	# Clean up.
+	call gsfree (sx)
+	if (sy != NULL)
+	    call gsfree (sy)
+	call sfree (sp)
+end
+
+
+# GEO_MSIFLUX -- Procedure to interpolate the surface coordinates
+
+procedure geo_msiflux (jmsi, xinterp, yinterp, outdata, c1, c2, line, x0, y0)
+
+pointer	jmsi	        	#I pointer to the jacobian interpolant
+real	xinterp[ARB]		#I x reference coordinates
+real	yinterp[ARB]		#I y reference coordinates
+real	outdata[ARB]		#O output data
+int	c1, c2			#I column limits in output image
+int	line			#I line to be flux corrected
+int	x0, y0			#I zero points of interpolation coordinates
+
+int	ncols
+pointer	sp, x, y, jacob
+
+begin
+	# Allocate tempoaray space.
+	call smark (sp)
+	ncols = c2 - c1 + 1
+	call salloc (x, ncols, TY_REAL)
+	call salloc (jacob, ncols, TY_REAL)
+
+	# Calculate the x points.
+	if (x0 == 1)
+	    call amovr (xinterp[c1], Memr[x], ncols)
+	else
+	    call aaddkr (xinterp[c1], real (-x0 + 1), Memr[x], ncols)
+
+	# Multiply the data by the Jacobian.
+	if (line == 0) {
+	    call asivector (jmsi, Memr[x], Memr[jacob], ncols)
+	} else {
+	    call salloc (y, ncols, TY_REAL)
+	    call amovkr ((yinterp[line] + real (-y0 + 1)), Memr[y], ncols)
+	    call msivector (jmsi, Memr[x], Memr[y], Memr[jacob], ncols)
+	}
+	call aabsr (Memr[jacob], Memr[jacob], ncols)
+	call amulr (outdata, Memr[jacob], outdata, ncols)
+
+	call sfree (sp)
+end
+
+
+# GEO_JFACTOR -- Compute the Jacobian of a linear transformation.
+
+real procedure geo_jfactor (sx1, sy1)
+
+pointer	sx1			#I pointer to x surface
+pointer	sy1			#I pointer to y surface
+
+real	xval, yval, xx, xy, yx, yy
+real	gsgetr()
+
+begin
+	xval = (gsgetr (sx1, GSXMIN) + gsgetr (sx1, GSXMAX)) / 2.0
+	if (sy1 == NULL)
+	    yval = 1.0
+	else
+	    yval = (gsgetr (sy1, GSYMIN) + gsgetr (sy1, GSYMIN)) / 2.0 
+
+	call gsder (sx1, xval, yval, xx, 1, 1, 0)
+	if (sy1 == NULL) {
+	    xy = 0.0
+	    yy = 1.0
+	    yx = 0.0
+	} else {
+	    call gsder (sx1, xval, yval, xy, 1, 0, 1)
+	    call gsder (sy1, xval, yval, yx, 1, 1, 0)
+	    call gsder (sy1, xval, yval, yy, 1, 0, 1)
+	}
+
+	return (abs (xx * yy - xy * yx))
+end
+
+
+# GEO_REPEAT -- Copy a small repeated pattern into the output buffer.
+
+procedure geo_repeat (pat, npat, output, ntimes)
+
+real	pat[ARB]	#I the input pattern to be repeated 
+int	npat		#I the size of the pattern
+real	output[ARB]	#O the output array
+int	ntimes		#I the number of times the pattern is to be repeated
+
+int	j, i, offset
+
+begin
+	do j = 1, ntimes {
+	    offset = npat * j - npat
+	    do i = 1, npat
+		output[offset+i] = pat[i]
+	}
+end