Repatch (from linux) of OSX IRAF

1 files changed, 448 insertions, 0 deletions

diff --git a/pkg/utilities/nttools/stxtools/wcslab/wlgrid.x b/pkg/utilities/nttools/stxtools/wcslab/wlgrid.x
new file mode 100644
index 00000000..4f457af4
--- /dev/null
+++ b/pkg/utilities/nttools/stxtools/wcslab/wlgrid.x
@@ -0,0 +1,448 @@
+include <gset.h>
+include <math.h>
+include "wcslab.h"
+include "wcs_desc.h"
+
+
+# WL_GRID -- Put the grid lines/tick marks on the plot.
+#
+# Description
+#  Based on previously determined parameters., draw the grid lines and/or
+#  tick marks onto the graph.  While in the process of doing this, create
+#  a list of possible label points for use by the label_grid routine.
+
+procedure wl_grid (wd)
+
+pointer wd		# I: the WCSLAB descriptor
+
+double	current, tmp_begin, tmp_end, tmp_minor_interval
+int	old_type, old_n_labels, min_counter
+int	gstati()
+
+begin
+	# Initialize the label counter.
+	WL_N_LABELS(wd) = 0
+
+	# Remember what line type is currently active.
+	old_type = gstati (WL_GP(wd), G_PLTYPE)
+
+	# Determine integer range for axis 1.
+	tmp_minor_interval = WL_MAJOR_INTERVAL(wd,AXIS1) / 
+	    double (WL_MINOR_INTERVAL(wd,AXIS1))
+
+	# If near-polar, the lines should go all the way to the poles.
+	if (WL_GRAPH_TYPE(wd) == NEAR_POLAR)
+	    if (abs (WL_BEGIN(wd,AXIS2)) < abs (WL_END(wd,AXIS2))) {
+	        tmp_begin = WL_BEGIN(wd,AXIS2)
+	        tmp_end = NORTH_POLE_LATITUDE
+	    } else {
+	        tmp_begin = SOUTH_POLE_LATITUDE
+	        tmp_end = WL_END(wd,AXIS2)
+	    }
+	else {
+	    tmp_begin = WL_BEGIN(wd,AXIS2)
+	    tmp_end = WL_END(wd,AXIS2)
+	}
+
+	# Plot lines of constant value in axis 1.
+	current = WL_BEGIN(wd,AXIS1)
+	min_counter = 0
+	repeat {
+
+	    if  (mod (min_counter, WL_MINOR_INTERVAL(wd,AXIS1)) == 0) {
+	        call gseti  (WL_GP(wd), G_PLTYPE, WL_MAJ_LINE_TYPE(wd))
+	        call wl_graph_constant_axis1 (wd, current, tmp_begin, tmp_end, 
+	            WL_MAJ_GRIDON(wd), WL_LABON(wd), WL_MAJ_TICK_SIZE(wd))
+	    } else {
+	        call gseti  (WL_GP(wd), G_PLTYPE, WL_MIN_LINE_TYPE(wd))
+	        call wl_graph_constant_axis1 (wd, current, tmp_begin, tmp_end,
+	            WL_MIN_GRIDON(wd), NO, WL_MIN_TICK_SIZE(wd))
+	    }
+
+	    min_counter = min_counter + 1
+	    current = WL_BEGIN(wd,AXIS1) + tmp_minor_interval * min_counter
+
+	} until  (real (current) > real (WL_END(wd,AXIS1)))
+
+	# Determine the interval range for the second axis.
+	tmp_minor_interval = WL_MAJOR_INTERVAL(wd,AXIS2) / 
+	    double (WL_MINOR_INTERVAL(wd,AXIS2))
+
+	# Plot lines of constant value in axis 2.
+	if  (WL_END(wd,AXIS2) < WL_BEGIN(wd,AXIS2)) {
+	    current = WL_END(wd,AXIS2)
+	    tmp_minor_interval = -tmp_minor_interval
+	    tmp_end = WL_BEGIN(wd,AXIS2)
+	} else {
+	    current = WL_BEGIN(wd,AXIS2)
+	    tmp_end = WL_END(wd,AXIS2)
+	}
+
+	min_counter = 0
+	tmp_begin = current 
+	repeat {
+	    if  (mod (min_counter, WL_MINOR_INTERVAL(wd,AXIS2)) == 0) {
+
+	        call gseti  (WL_GP(wd), G_PLTYPE, WL_MAJ_LINE_TYPE(wd))
+	        old_n_labels = WL_N_LABELS(wd)
+	        call wl_graph_constant_axis2 (wd, current, WL_BEGIN(wd,AXIS1), 
+	            WL_END(wd,AXIS1), WL_MAJ_GRIDON(wd), WL_LABON(wd), 
+	            WL_MAJ_TICK_SIZE(wd))
+
+	        # If this is a polar or near_polar plot, the latitudes
+		# should be placed near the line, not where it crosses the
+		# window boundary.
+
+	        if  (WL_GRAPH_TYPE(wd) == POLAR &&
+	            (WL_MAJ_GRIDON(wd) == YES) && (WL_LABON(wd) == YES)) {
+	    	    WL_N_LABELS(wd) = old_n_labels + 1
+	    	    call wl_w2ld (WL_WLCT(wd), WL_AXIS_FLIP(wd), 
+	                WL_POLAR_LABEL_POSITION(wd), current,
+	                WL_LABEL_POSITION(wd,WL_N_LABELS(wd),X_DIM),
+	                WL_LABEL_POSITION(wd,WL_N_LABELS(wd),Y_DIM), 1)
+	    	    WL_LABEL_VALUE(wd,WL_N_LABELS(wd)) = current
+	    	    WL_LABEL_AXIS(wd,WL_N_LABELS(wd)) = AXIS2
+	        }
+
+	    } else {
+	        call gseti  (WL_GP(wd), G_PLTYPE, WL_MIN_LINE_TYPE(wd))
+	        call wl_graph_constant_axis2 (wd, current, WL_BEGIN(wd,AXIS1),
+		    WL_END(wd,AXIS1), WL_MIN_GRIDON(wd), NO,
+		    WL_MIN_TICK_SIZE(wd)) 
+	    }
+
+	    # Increment and continue
+	    min_counter = min_counter + 1
+	    current = tmp_begin + tmp_minor_interval * min_counter
+
+	} until  (real (current) > real (tmp_end))
+
+	# Set the line type back to the way it was.
+	call gseti (WL_GP(wd), G_PLTYPE, old_type)
+end
+
+
+# WL_GRAPH_CONSTANT_AXIS1 - Graph lines of constant X-axis values.
+#
+# Description
+#  Because projections are rarely linear, the basic GIO interface to draw
+#  lines cannot be used.  Instead, this routine handles the line drawing.
+#  Also, possible label points are found and added to a label list array.
+#
+# CLUDGE! Finding labels here is WRONG.  Ideally, crossing points (where the
+# line crosses a screen boundary) should be determined analytically.  However,
+# the MWCS interface lacks the required "cross-transformations".  It can
+# still be done, but requires a total bypassing of MWCS.  Instead, this
+# simplistic approach is used.
+
+procedure wl_graph_constant_axis1 (wd, x, ymin, ymax, gridon, label, tick_size)
+
+pointer wd          	# I: the WCSLAB descriptor
+double  x               # I: X value to hold constant
+double  ymin, ymax      # I: Y values to vary between
+int	gridon          # I: true if gridding is on
+int     label           # I: true if the points should be labelled
+real    tick_size       # I: size of tick marks
+
+bool	done
+double	lastx, lasty, lx, ly, y, yinc
+real	rlx, rly
+
+begin
+	# Determine the scale at which Y should be incremented.
+	yinc =  (ymax - ymin) / WL_LINE_SEGMENTS(wd)
+
+	# Now graph the line segments.
+	y = ymin
+	call wl_w2ld (WL_WLCT(wd), WL_AXIS_FLIP(wd), x, y, lastx, lasty, 1)
+
+	rlx = lastx
+	rly = lasty
+	call gamove (WL_GP(wd), rlx, rly)
+
+	repeat {
+	    call wl_w2ld (WL_WLCT(wd), WL_AXIS_FLIP(wd), x, y, lx, ly, 1)
+	    call wl_point_to_label (wd, lastx, lasty, lx, ly, AXIS1, x, gridon,
+	        label, tick_size)
+	    if (gridon == YES) {
+		rlx = lx
+		rly = ly
+	        call gadraw (WL_GP(wd), rlx, rly)
+	    }
+	    if (yinc < 0.)
+	        done = y < ymax
+	    else
+	        done = y > ymax
+	    y = y + yinc
+	    lastx = lx
+	    lasty = ly
+	} until  (done)
+end
+
+
+# WL_GRAPH_CONSTANT_AXIS2 -- Graph lines of constant Y-axis values.
+#
+# Description
+#  Because projections are rarely linear, the basic GIO interface to draw
+#  lines cannot be used.  Instead, this routine handles the line drawing.
+#  Also, possible label points are found and added to an label list array.
+#
+# CLUDGE! Finding labels here is WRONG.  Ideally, crossing points (where the
+# line crosses a screen boundary) should be determined analytically.  However,
+# the MWCS interface lacks the required "cross-transformations".  It can
+# still be done, but requires a total bypassing of MWCS.  Instead, this
+# simplistic approach is used.
+
+procedure wl_graph_constant_axis2 (wd, y, xmin, xmax, gridon, label, tick_size)
+
+pointer wd              # I: the WCSLAB descriptor
+double  y               # I: Y value to hold constant
+double  xmin, xmax      # I: X values to vary between
+int	gridon          # I: true if gridding is on
+int	label           # I: true if points should be labelled
+real    tick_size       # I: tick mark size
+
+bool	done
+double	lx, ly, lastx, lasty, x, xinc
+real	rlx, rly
+
+begin
+	# Determine the scale at which X should be incremented.
+	xinc =  (xmax - xmin) / WL_LINE_SEGMENTS(wd)
+
+	# Now graph the line segments.
+	x = xmin
+	call wl_w2ld (WL_WLCT(wd), WL_AXIS_FLIP(wd), x, y, lastx, lasty, 1)
+
+	rlx = lastx
+	rly = lasty
+	call gamove (WL_GP(wd), rlx, rly)
+
+	repeat {
+	    call wl_w2ld (WL_WLCT(wd), WL_AXIS_FLIP(wd), x, y, lx, ly, 1)
+	    call wl_point_to_label (wd, lastx, lasty, lx, ly, AXIS2, y, gridon,
+	        label, tick_size)
+	    if  (gridon == YES) {
+		rlx = lx
+		rly = ly
+	        call gadraw (WL_GP(wd), rlx, rly)
+	    }
+	    if  (xinc < 0.)
+	        done = x < xmax
+	    else
+		done = x > xmax
+	    lastx = lx
+	    lasty = ly
+	    x = x + xinc
+	} until  (done)
+end
+
+
+# Define the inside and outside of the window.
+
+define OUT (($1<=WL_SCREEN_BOUNDARY(wd,LEFT))||($1>=WL_SCREEN_BOUNDARY(wd,RIGHT))||($2<=WL_SCREEN_BOUNDARY(wd,BOTTOM))||($2>=WL_SCREEN_BOUNDARY(wd,TOP)))
+
+define IN (($1>WL_SCREEN_BOUNDARY(wd,LEFT))&&($1<WL_SCREEN_BOUNDARY(wd,RIGHT))&&($2>WL_SCREEN_BOUNDARY(wd,BOTTOM))&&($2<WL_SCREEN_BOUNDARY(wd,TOP)))
+
+
+# WL_POINT_TO_LABEL - Record a points position along a window boundary.
+#
+# Description
+#  Since the MWCS interface lacks "cross-transformations", i.e. If given
+#  RA and and X axis location, find DEC and Y axis, we need a different
+#  method of determining when lines of constant Axis 1/Axis 2 cross
+#  the window boundary.  Since each line is drawn by small increments, each
+#  increment is watched to see if a window boundary has been crossed.  This
+#  is what this routine does:  Confirms that a boundary has been crossed,
+#  records this position and label value.  Tick marks are also drawn here
+#  because all the necessary information is known at this point.
+#
+# NOTE: THIS WAY IS A CLUDGE !  A more formal method of finding
+# cross-transformations is needed- most likely an iterative method.  This
+# way was just "convenient at the time".
+
+procedure wl_point_to_label (wd, x1, y1, x2, y2, axis, axis_value, gridon, 
+	label, tick_size)
+
+pointer wd                  # I: the WCSLAB descriptor
+double  x1, y1, x2, y2      # I: the two possible points to label
+int     axis                # I: which axis are we dealing with ?
+double  axis_value          # I: the value of the axis at this point
+int	gridon              # I: true if gridding is on
+int	label               # I: true if this point should have a label
+real    tick_size           # I: size of the tick mark
+
+double	nx, ny, tick_x, tick_y
+double	wl_vector_angle()
+
+begin
+	# Determine whether the two points straddle a window boundary. If they 
+	# do, then this is the point to label.
+	if  (OUT (x1, y1) && IN (x2, y2)) {
+
+	    call wl_axis_on_line (x1, y1, x2, y2, WL_SCREEN_BOUNDARY(wd,1),
+	        nx, ny)
+
+	    if  (gridon == NO) {
+	        call wl_mark_tick (WL_GP(wd), WL_NDC_WCS(wd), tick_size, 
+	            WL_TICK_IN(wd), x1, y1, x2, y2, nx, ny, tick_x, tick_y)
+	        if (WL_TICK_IN(wd) != WL_LABOUT(wd)) {
+	            nx = tick_x
+	            ny = tick_y
+	        }
+	    } 
+
+	    if  ((label == YES) && WL_N_LABELS(wd) < MAX_LABEL_POINTS) {
+	        WL_N_LABELS(wd) = WL_N_LABELS(wd) + 1
+	        WL_LABEL_POSITION(wd,WL_N_LABELS(wd),AXIS1) = nx
+	        WL_LABEL_POSITION(wd,WL_N_LABELS(wd),AXIS2) = ny
+	        WL_LABEL_VALUE(wd,WL_N_LABELS(wd)) = axis_value
+	        WL_LABEL_AXIS(wd,WL_N_LABELS(wd)) = axis
+	    	WL_LABEL_ANGLE(wd,WL_N_LABELS(wd)) =
+		    wl_vector_angle (WL_GP(wd), x1, y1, x2, y2)
+	    }
+	}
+
+	if  (IN (x1, y1) && OUT (x2, y2)) {
+
+	    call wl_axis_on_line (x2, y2, x1, y1, WL_SCREEN_BOUNDARY(wd,1), 
+	        nx, ny)
+
+	    if  (gridon == NO) {
+	        call wl_mark_tick (WL_GP(wd), WL_NDC_WCS(wd), tick_size, 
+	            WL_TICK_IN(wd), x2, y2, x1, y1, nx, ny, tick_x, tick_y)
+	        if (WL_TICK_IN(wd) != WL_LABOUT(wd)) {
+	      	    nx = tick_x
+	      	    ny = tick_y
+	        }
+	    }
+
+	    if  ((label == YES) && WL_N_LABELS(wd) < MAX_LABEL_POINTS) {
+		WL_N_LABELS(wd) = WL_N_LABELS(wd) + 1
+		WL_LABEL_POSITION(wd,WL_N_LABELS(wd),AXIS1) = nx
+		WL_LABEL_POSITION(wd,WL_N_LABELS(wd),AXIS2) = ny
+		WL_LABEL_VALUE(wd,WL_N_LABELS(wd)) = axis_value
+		WL_LABEL_AXIS(wd,WL_N_LABELS(wd)) = axis
+		WL_LABEL_ANGLE(wd,WL_N_LABELS(wd)) =
+		    wl_vector_angle (WL_GP(wd), x1, y1, x2, y2)
+	    }
+	}
+
+end
+
+
+# WL_MARK_TICK - Draw the tick mark at the point.
+#
+# Description
+#  Draw a tick mark rooted at (sx,sy), whose direction is defined by
+#  the vector (x0,y0) to (x1,y1). The other end of the tick mark is
+# returned in (tick_x,tick_y).
+
+procedure wl_mark_tick (gp, wcs, tick_size, in, x0, y0, x1, y1, sx, sy,
+	tick_x, tick_y)
+
+pointer gp              # I: the graphics pointer
+int     wcs             # I: the WCS to use to draw the tick marks
+real    tick_size       # I: size of the tick mark
+int	in              # I: true if ticks should be into the graph
+double  x0, y0, x1, y1  # I: the points defining the tick direction
+double	sx, sy		# I: the root point of the tick mark
+double  tick_x, tick_y  # O: the end point of the tick mark
+
+int	old_line, old_wcs
+real	dx, dy, t, ndc_x0, ndc_y0, ndc_x1, ndc_y1, ndc_x2, ndc_y2
+real	ndc_sx, ndc_sy
+int	gstati()
+real	wl_distancer()
+
+begin
+	# Change graphics coordinates to NDC.
+	old_wcs = gstati (gp, G_WCS)
+	old_line = gstati (gp, G_PLTYPE)
+	call gseti (gp, G_WCS, wcs)
+	call gseti (gp, G_PLTYPE, GL_SOLID)
+
+	# Convert the points to NDC coordinates.
+	ndc_x2 = real (sx)
+	ndc_y2 = real (sy)
+	call gctran (gp, ndc_x2, ndc_y2, ndc_sx, ndc_sy, old_wcs, wcs)
+	ndc_x2 = real (x0)
+	ndc_y2 = real (y0)
+	call gctran (gp, ndc_x2, ndc_y2, ndc_x0, ndc_y0, old_wcs, wcs)
+	ndc_x2 = real (x1)
+	ndc_y2 = real (y1)
+	call gctran (gp, ndc_x2, ndc_y2, ndc_x1, ndc_y1, old_wcs, wcs)
+
+	# Determine the parameterized line parameters.
+	dx = ndc_x1 - ndc_x0
+	dy = ndc_y1 - ndc_y0
+
+	# Determine how large in "time" the tick mark is.
+	t = tick_size / wl_distancer (ndc_x0, ndc_y0, ndc_x1, ndc_y1)
+
+	# If tick marks are to point out of the graph, reverse the sign of t.
+	# Also need to turn clipping off for the ticks appear.
+	if (in == NO) {
+	  t = -t
+	  call gseti (gp, G_CLIP, NO)
+	}
+
+	# Determine the end point of the tick mark.
+	ndc_x2 = t * dx + ndc_sx
+	ndc_y2 = t * dy + ndc_sy
+
+	# Now draw the tick mark.
+	call gamove (gp, ndc_sx, ndc_sy)
+	call gadraw (gp, ndc_x2, ndc_y2)
+
+	# Restore clipping if necessary.
+	if (in == NO)
+	  call gseti (gp, G_CLIP, YES)
+
+	# Restore previous settings.
+	call gseti (gp, G_WCS, old_wcs)
+	call gseti (gp, G_PLTYPE, old_line)
+
+	# Transform the end of the tick mark.
+	call gctran (gp, ndc_x2, ndc_y2, dx, dy, wcs, old_wcs)
+	tick_x = double (dx)
+	tick_y = double (dy)
+end
+
+
+# WL_VECTOR_ANGLE -- Return the angle represented by the given vector.
+#
+# Returns
+#   The angle of the given vector.
+
+double procedure wl_vector_angle (gp, x1, y1, x2, y2)
+
+pointer gp                  # I: the graphics descriptor
+double  x1, y1, x2, y2      # I: the end points of the vector
+
+double	dangle
+real	angle, delx, dely, ndc_x1, ndc_x2, ndc_y1, ndc_y2
+bool	fp_equalr()
+int	gstati()
+
+begin
+	# Translate the input points to NDC coordinates.
+	ndc_x1 = real (x1)
+	ndc_x2 = real (x2)
+	ndc_y1 = real (y1)
+	ndc_y2 = real (y2)
+	call gctran (gp, ndc_x1, ndc_y1, ndc_x1, ndc_y1, gstati (gp, G_WCS), 
+	    NDC_WCS)
+	call gctran (gp, ndc_x2, ndc_y2, ndc_x2, ndc_y2, gstati (gp, G_WCS), 
+	    NDC_WCS)
+
+	dely = ndc_y2 - ndc_y1
+	delx = ndc_x2 - ndc_x1
+	if (fp_equalr (delx, 0.) && fp_equalr (dely, 0.))
+	    angle = 0.0
+	else
+	    angle = RADTODEG (atan2 (dely, delx))
+	dangle = angle
+
+	return (dangle)
+end