Repatch (from linux) of OSX IRAF

1 files changed, 1583 insertions, 0 deletions

diff --git a/sys/gio/ncarutil/gridal.f b/sys/gio/ncarutil/gridal.f
new file mode 100644
index 00000000..8ad31020
--- /dev/null
+++ b/sys/gio/ncarutil/gridal.f
@@ -0,0 +1,1583 @@
+      SUBROUTINE GRIDAL(MAJRX,MINRX,MAJRY,MINRY,IXLAB,IYLAB,IGPH,X,Y)
+C
+C                                                                               
+C +-----------------------------------------------------------------+           
+C |                                                                 |           
+C |                Copyright (C) 1986 by UCAR                       |           
+C |        University Corporation for Atmospheric Research          |           
+C |                    All Rights Reserved                          |           
+C |                                                                 |           
+C |                 NCARGRAPHICS  Version 1.00                      |           
+C |                                                                 |           
+C +-----------------------------------------------------------------+           
+C                                                                               
+C                                                                               
+C LATEST REVISION        JULY, 1985
+C
+C PURPOSE                THIS IS A PACKAGE OF ROUTINES FOR DRAWING
+C                        GRAPH PAPER, AXES, AND OTHER BACKGROUNDS.
+C
+C USAGE                  EACH USER ENTRY POINT IN THIS PACKAGE (GRID,
+C                        GRIDL, PERIM, PERIML, HALFAX, LABMOD,
+C                        TICK4, AND GRIDAL) WILL BE DESCRIBED
+C                        SEPARATELY BELOW.  FIRST, HOWEVER, WE
+C                        WILL DISCUSS HOW MAJOR AND MINOR DIVISIONS
+C                        IN THE GRAPH PAPER ARE HANDLED BY ALL
+C                        ENTRIES WHICH USE THEM.
+C
+C                        GRIDAL, GRID, GRIDL, PERIM, PERIML, AND
+C                        HALFAX HAVE ARGUMENTS  MAJRX,MINRX,MAJRY,
+C                        MINRY WHICH CONTROL THE NUMBER OF MAJOR AND
+C                        MINOR DIVISIONS IN THE GRAPH PAPER OR
+C                        PERIMETERS.  THE NUMBER OF DIVISIONS REFERS
+C                        TO THE HOLES BETWEEN LINES RATHER THAN THE
+C                        LINES THEMSELVES.  THIS MEANS THAT THERE
+C                        IS ALWAYS ONE MORE MAJOR DIVISION LINE THAN
+C                        THE NUMBER OF MAJOR DIVISIONS.  SIMILARLY,
+C                        THERE IS ONE LESS MINOR DIVISION LINE THAN
+C                        MINOR DIVISIONS (PER MAJOR DIVISION.)
+C
+C                        MAJRX,MAJRY,MINRX,MINRY HAVE DIFFERENT
+C                        MEANINGS DEPENDING UPON WHETHER LOG
+C                        SCALING IS IN EFFECT (SET VIA SETUSV OR
+C                        SET IN THE SPPS PACKAGE.)
+C
+C                        FOR LINEAR SCALING,
+C                        MAJRX AND MAJRY SPECIFY THE NUMBER OF MAJOR
+C                        DIVISIONS ALONG THE X-AXIS OR Y-AXIS
+C                        RESPECTIVELY, AND MINRX AND MINRY SPECIFY
+C                        THE NUMBER OF MINOR DIVISIONS PER MAJOR
+C                        DIVISION.
+C
+C                        FOR LOG SCALING ALONG THE X-AXIS
+C                        EACH MAJOR DIVISION OCCURS AT A FACTOR OF
+C                        10**MAJRX TIMES THE PREVIOUS DIVISION.
+C                        FOR EXAMPLE, IF THE MINIMUM X-AXIS VALUE IS
+C                        3., AND THE MAXIMUM X-AXIS VALUE IS 3000.,
+C                        AND MAJRX IS 1, THEN MAJOR DIVISIONS WILL
+C                        OCCUR AT 3., 30., 300., AND 3000.  SIMILARLY
+C                        FOR MAJRY.   IF LOG SCALING IS IN EFFECT ON
+C                        THE X-AXIS AND MINRX.LE.10, THEN THERE ARE
+C                        NINE MINOR DIVISIONS BETWEEN EACH MAJOR
+C                        DIVISION.  FOR EXAMPLE, BETWEEN 3. AND 30.
+C                        THERE WOULD BE A MINOR DIVISION AT 6., 9.,
+C                        12.,...,27.  IF LOG SCALING IS IN EFFECT ON
+C                        THE X-AXIS AND MINRX.GT.10, THEN THERE WILL
+C                        BE NO MINOR SUBDIVISIONS.  MINRY IS TREATED
+C                        IN THE SAME MANNER AS MINRX.
+C
+C                        IF DIFFERENT COLORS (OR INTENSITIES) ARE TO
+C                        BE USED FOR NORMAL INTENSITY, LOW INTENSITY,
+C                        OR TEXT COLOR, THEN THE VALUES IN COMMON
+C                        BLOCK  GRIINT  SHOULD BE CHANGED AS FOLLOWS:
+C
+C                          IGRIMJ      COLOR INDEX FOR NORMAL (MAJOR)
+C                                      INTENSITY LINES.
+C                          IGRIMN      COLOR INDEX FOR LOW INTENSITY
+C                                      LINES.
+C                          IGRITX      COLOR INDEX FOR TEXT (LABELS.)
+C
+C WE NOW DESCRIBE EACH ENTRY IN THIS PACKAGE.
+C
+C-----------------------------------------------------------------------
+C SUBROUTINE GRID
+C-----------------------------------------------------------------------
+C
+C PURPOSE       TO DRAW GRAPH PAPER.
+C
+C USAGE         CALL GRID (MAJRX,MINRX,MAJRY,MINRY)
+C
+C DESCRIPTION   THIS SUBROUTINE DRAWS GRAPH LINES IN THE PORTION
+C               OF THE PLOTTER SPECIFIED BY THE CURRENT VIEWPORT
+C               SETTING WITH THE NUMBER OF MAJOR AND MINOR
+C               DIVISIONS AS SPECIFIED BY THE ARGUMENTS.
+C
+C-----------------------------------------------------------------------
+C SUBROUTINE GRIDAL
+C-----------------------------------------------------------------------
+C
+C PURPOSE       A GENERAL ENTRY POINT FOR ALL BACKGROUND ROUTINES
+C               WITH THE OPTION OF LINE LABELLING ON EACH AXIS.
+C
+C USAGE         CALL GRIDAL (MAJRX,MINRX,MAJRY,MINRY,IXLAB,IYLAB,
+C                            IGPH,X,Y)
+C
+C ARGUMENTS     MAJRX,MINRX,MAJRY,MINRY
+C                 MAJOR AND MINOR AXIS DIVISIONS AS DESCRIBED IN THE
+C                 USAGE SECTION OF THE PACKAGE DOCUMENTATION ABOVE.
+C
+C               IXLAB,IYLAB (INTEGERS)
+C                 FLAGS FOR AXIS LABELS:
+C
+C                   IXLAB = -1  NO X-AXIS DRAWN
+C                               NO X-AXIS LABELS
+C
+C                         =  0  X-AXIS DRAWN
+C                               NO X-AXIS LABELS
+C
+C                         =  1  X-AXIS DRAWN
+C                               X-AXIS LABELS
+C
+C                   IYLAB = -1  NO Y-AXIS DRAWN
+C                               NO Y-AXIS LABELS
+C
+C                         =  0  Y-AXIS DRAWN
+C                               NO Y-AXIS LABELS
+C
+C                         =  1  Y-AXIS DRAWN
+C                               Y-AXIS LABELS
+C
+C
+C               IGPH
+C                 FLAG FOR BACKGROUND TYPE:
+C
+C                    IGPH         X-AXIS BACKGROUND  Y-AXIS BACKGROUND
+C                    ----         -----------------  -----------------
+C                     0           GRID               GRID
+C                     1           GRID               PERIM
+C                     2           GRID               HALFAX
+C                     4           PERIM              GRID
+C                     5           PERIM              PERIM
+C                     6           PERIM              HALFAX
+C                     8           HALFAX             GRID
+C                     9           HALFAX             PERIM
+C                    10           HALFAX             HALFAX
+C
+C               X,Y
+C                 WORLD COORDINATES OF THE INTERSECTION OF THE AXES
+C                 IF  IGPH=10 .
+C
+C-----------------------------------------------------------------------
+C SUBROUTINE GRIDL
+C-----------------------------------------------------------------------
+C
+C PURPOSE       TO DRAW GRAPH PAPER.
+C
+C USAGE         CALL GRIDL (MAJRX,MINRX,MAJRY,MINRY)
+C
+C DESCRIPTION   THIS SUBROUTINE BEHAVES EXACTLY AS GRID, BUT EACH
+C               MAJOR DIVISION IS LABELED WITH ITS NUMERICAL VALUE.
+C
+C-----------------------------------------------------------------------
+C SUBROUTINE HALFAX
+C-----------------------------------------------------------------------
+C
+C PURPOSE       TO DRAW ORTHOGONAL AXES.
+C
+C USAGE         CALL HALFAX (MAJRX,MINRX,MAJRY,MINRY,X,Y,IXLAB,IYLAB)
+C
+C DESCRIPTION   THIS SUBROUTINE DRAWS ORTHOGONAL AXES INTERSECTING
+C               AT COORDINATE (X,Y) WITH OPTIONAL LABELING OPTIONS AS
+C               SPECIFIED BY IXLAB AND IYLAB.
+C
+C ARGUMENTS     MAJRX,MINRX,MAJRY,MINRY
+C                 MAJOR AND MINOR DIVISION SPECIFICATIONS AS PER THE
+C                 DESCRIPTION IN THE PACKAGE USAGE SECTION ABOVE.
+C
+C               X,Y
+C                 WORLD COORDINATES SPECIFYING THE INTERSECTION POINT
+C                 OF THE X AND Y AXES.
+C
+C               IXLAB,IYLAB (INTEGERS)
+C                 FLAGS FOR AXIS LABELS:
+C
+C                   IXLAB = -1  NO X-AXIS DRAWN
+C                               NO X-AXIS LABELS
+C
+C                         =  0  X-AXIS DRAWN
+C                               NO X-AXIS LABELS
+C
+C                         =  1  X-AXIS DRAWN
+C                               X-AXIS LABELS
+C
+C                   IYLAB = -1  NO Y-AXIS DRAWN
+C                               NO Y-AXIS LABELS
+C
+C                         =  0  Y-AXIS DRAWN
+C                               NO Y-AXIS LABELS
+C
+C                         =  1  Y-AXIS DRAWN
+C                               Y-AXIS LABELS
+C
+C-----------------------------------------------------------------------
+C SUBROUTINE LABMOD
+C-----------------------------------------------------------------------
+C
+C PURPOSE       TO ALLOW MORE COMPLETE CONTROL OVER THE APPEARANCE
+C               OF THE LABELS ON THE BACKGROUND PLOTS.
+C
+C USAGE         CALL LABMOD (FMTX,FMTY,NUMX,NUMY,ISIZX,ISIZY,
+C                            IXDEC,IYDEC,IXOR)
+C
+C DESCRIPTION   THIS SUBROUTINE PRESETS PARAMETERS FOR THE OTHER
+C               BACKGROUND ROUTINES IN THIS PACKAGE.  LABMOD ITSELF
+C               DOES NO PLOTTING AND IT MUST BE CALLED BEFORE THE
+C               THE BACKGROUND ROUTINES FOR WHICH IT IS PRESETTING
+C               PARAMETERS.
+C
+C ARGUMENTS     FMTX,FMTY  (TYPE CHARACTER)
+C                 FORMAT SPECIFICATIONS FOR THE X-AXIS AND Y-AXIS
+C                 NUMERICAL LABELS IN GRIDL, PERIML, GRIDAL, OR
+C                 HALFAX.  THE SPECIFICATION MUST START WITH A LEFT
+C                 PARENTHESIS AND END WITH A RIGHT PARENTHESIS AND
+C                 SHOULD NOT USE MORE THAN 8 CHARACTERS.  ONLY
+C                 FLOATING-POINT CONVERSIONS (F, E, AND G) SUCH AS
+C                 FMTX='(F8.2)' AND  FMTY='(E10.0)' FOR EXAMPLE.
+C
+C               NUMX,NUMY (INTEGER)
+C                 THE NUMBER OF CHARACTERS SPECIFIED BY  FMTX  AND
+C                 FMTY.  FOR THE ABOVE EXAMPLES, THESE WOULD BE
+C                 NUMX=8  AND  NUMY=10  (NOT 6 AND 7).
+C
+C               ISIZX,ISIZY
+C                 CHARACTER SIZE CODES FOR THE LABELS.  THESE SIZE
+C                 CODES ARE THE SAME AS THOSE FOR THE SPPS ENTRY
+C                 PWRIT.
+C
+C               IXDEC
+C                 THE DECREMENT IN PLOTTER ADDRESS UNITS FROM THE
+C                 LEFTMOST PLOTTER COORDINATE (AS SPECIFIED BY THE
+C                 CURRENT VIEWPORT) TO THE NEAREST X-ADDRESS OF THE
+C                 LABEL SPECIFIED BY  FMTY, NUMY, AND ISIZY.  FOR
+C                 EXAMPLE, IF THE MINIMUM X-COORDINATE OF THE CURRENT
+C                 VIEWPORT IS .1,  MINX  IS 102 (.1*1024).  IF  IXDEC
+C                 IS 60, THE LABEL WILL START AT 42 (102-60).  THE
+C                 FOLLOWING CONVENTIONS ARE USED:
+C
+C                 O  IF  IXDEC=0, IT IS AUTOMATICALLY RESET TO PROPERLY
+C                    POSITION THE  Y-AXIS  LABELS TO THE LEFT OF THE
+C                    LEFT Y-AXIS,  IXDEC=20 .
+C
+C                 O  IF  IXDEC=1,  Y-AXIS LABELS WILL GO TO THE RIGHT
+C                    OF THE GRAPH, IXDEC=-20 .
+C
+C                 WHEN EITHER  HALFAX  OR  GRIDAL  IS CALLED TO DRAW AN
+C                 AXIS,  IXDEC  IS THE DISTANCE FROM THE AXIS RATHER
+C                 THAN FROM THE MINIMUM VIEWPORT COORDINATE.
+C
+C               IYDEC
+C                 THE DECREMENT IN PLOTTER ADDRESS UNITS FROM THE
+C                 MINIMUM Y-AXIS COORDINATE AS SPECIFIED BY THE
+C                 CURRENT VIEWPORT TO THE NEAREST Y-ADDRESS OF THE
+C                 LABEL SPECIFIED BY  FMTX, NUMX, AND ISIZX.  FOR
+C                 EXAMPLE, IF THE MINIMUM Y-COORDINATE OF THE
+C                 CURRENT VIEWPORT IS .2,  MINY IS 205 (.2*1024).
+C                 IF  IYDEC=30, THE LABEL WILL END AT  205-30=175.
+C                 THE FOLLOWING CONVENTIONS ARE USED:
+C
+C                 O  IF  IYDEC=0, IT IS AUTOMATICALLY RESET TO
+C                    PROPERLY POSITION X-AXIS LABELS ALONG THE
+C                    BOTTOM,  IYDEC=20 .
+C
+C                 O  IF  IYDEC=1, X-AXIS LABELS WILL GO ALONG THE
+C                    TOP OF THE GRAPH,  IYDEC=-20 .
+C
+C               IXOR (INTEGER)
+C                 ORIENTATION OF THE X-AXIS LABELS.
+C
+C                   IXOR = 0    +X (HORIZONTAL)
+C                        = 1    +Y (VERTICAL)
+C
+C                 IN NORMAL ORIENTATION, THE ACTUAL NUMBER OF
+C                 NON-BLANK DIGITS IS CENTERED UNDER THE LINE
+C                 OR TICK TO WHICH IT APPLIES.
+C
+C-----------------------------------------------------------------------
+C SUBROUTINE PERIM
+C-----------------------------------------------------------------------
+C
+C PURPOSE       TO DRAW A PERIMETER WITH TICK MARKS.
+C
+C USAGE         CALL PERIM (MAJRX,MINRX,MAJRY,MINRY)
+C
+C DESCRIPTION   THIS SUBROUTINE BEHAVES JUST AS GRID EXCEPT THAT
+C               INTERIOR LINES ARE REPLACED WITH TICK MARKS ALONG
+C               THE EDGES.  TICK MARKS AT MAJOR DIVISIONS ARE
+C               SLIGHTLY LARGER THAN TICK MARKS AT MINOR DIVISIONS.
+C
+C-----------------------------------------------------------------------
+C SUBROUTINE PERIML
+C-----------------------------------------------------------------------
+C
+C PURPOSE       TO DRAW A PERIMETER WITH TICK MARKS AND LABELS.
+C
+C USAGE         CALL PERIML (MAJRX,MINRX,MAJRY,MINRY)
+C
+C DESCRIPTION   THIS SUBROUTINE BEHAVES JUST AS PERIM, BUT EACH
+C               MAJOR DIVISION IS LABELED WITH ITS NUMERICAL VALUE.
+C
+C-----------------------------------------------------------------------
+C SUBROUTINE TICK4
+C-----------------------------------------------------------------------
+C
+C PURPOSE       TO ALLOW PROGRAM CONTROL OF TICK MARK LENGTH.
+C
+C USAGE         CALL TICK4 (LMAJX,LMINX,LMAJY,LMINY)
+C
+C DESCRIPTION   THIS SUBROUTINE ALLOWS PROGRAM CONTROL OF TICK
+C               MARK LENGTH IN  PERIM, PERIML, GRIDAL, AND HALFAX.
+C
+C ARGUMENTS     LMAJX,LMAJY
+C                 LENGTH IN PLOTTER ADDRESS UNITS OF MAJOR DIVISION
+C                 TICK MARKS ON THE X-AXIS AND Y-AXIS RESPECTIVELY.
+C                 THESE VALUES ARE INITIALLY SET TO 12 .
+C
+C               MINRX,MINRY
+C                 LENGTH IN PLOTTER ADDRESS UNITS OF MINOR DIVISION
+C                 TICK MARKS ON THE X-AXIS AND Y-AXIS RESPECTIVELY.
+C                 THESE VALUES ARE INITIALLY SET TO 8 .
+C
+C-----------------------------------------------------------------------
+C
+C WE NOW RESUME THE PACKAGE DOCUMENTATION.
+C
+C ENTRY POINTS  GRID,GRIDAL,GRIDL,HALFAX,LABMOD,PERIM,PERIML,TICK4,
+C               TICKS,CHSTR,EXPAND,GRIDT
+C
+C COMMON BLOCKS LAB,CLAB,TICK,GRIINT
+C
+C REQUIRED      THE ERPRT77 PACKAGE AND THE SPPS.
+C ROUTINES
+C
+C I/O           PLOTS BACKGROUNDS
+C
+C PRECISION     SINGLE
+C
+C LANGUAGE      FORTRAN 77
+C
+C HISTORY       WRITTEN IN JUNE, 1984.  BASED ON THE NCAR SYSTEM
+C               PLOT PACKAGE ENTRIES HAVING THE SAME NAMES.
+C
+        COMMON /LAB/ SIZX,SIZY,XDEC,YDEC,IXORI
+        COMMON /CLAB/ XFMT, YFMT
+        COMMON /TICK/ MAJX, MINX, MAJY, MINY
+        COMMON /GRIINT/ IGRIMJ, IGRIMN, IGRITX
+C
+C INTERNAL VARIABLES:
+C
+C               CHUPX,CHUPY     CHARACTER UP VECTOR VALUES ON ENTRY
+C
+C               CURMAJ          IF LOGMIN=.TRUE., THEN THIS IS THE
+C                               CURRENT MAJOR TICK/GRID POSITION
+C
+C               ICNT            NORMALIZATION TRANSFORMATION NUMBER IN
+C                               EFFECT ON ENTRY TO GRIDAL
+C
+C               LASF(13)        ASPECT SOURCE FLAG TABLE AS USED BY GKS.
+C
+C               LGRID           .TRUE. IF GRIDS ARE TO BE DRAWN ON THE
+C                               CURRENT AXIS (OPPOSED TO TICKS)
+C
+C               LOGMIN          .TRUE.  IF LOG SCALING IS IN EFFECT AND
+C                               MINOR TICK MARKS OR GRIDS ARE DESIRED
+C
+C               LOGVAL          LINEAR OR LOG SCALING
+C                               1 = X LINEAR, Y LINEAR
+C                               2 = X LINEAR, Y LOG
+C                               3 = X LOG, Y LINEAR
+C                               4 = X LOG, Y LOG
+C
+C               MINCNT          NUMBER OF MINOR DIVISIONS PER MAJOR
+C
+C               NERR            COUNTS ERROR NUMBER
+C
+C               NEXTMAJ         IF LOGMIN=.TRUE., THEN THIS IS THE NEXT
+C                               MAJOR TICK/GRID POSITION
+C
+C               NWIND(4)        WINDOW LIMITS IN WORLD COORDINATES
+C                               AFTER EXPANSION
+C
+C               OCOLI           COLOR INDEX ON ENTRY TO GRIDAL
+C
+C               OLDALH,OLDALV   TEXT ALIGNMENT VALUES ON ENTRY
+C                               (HORIZONTAL AND VERTICAL)
+C
+C               OLDCH           CHARACTER HEIGHT ON ENTRY TO GRIDAL
+C
+C               OPLASF          STORES VALUE OF POLYLINE COLOR ASF ON
+C                               ENTRY TO GRIDAL
+C
+C               OTXASF          STORES VALUE OF TEXT COLOR ASF ON
+C                               ENTRY TO GRIDAL
+C
+C               OTXCOL          TEXT COLOR INDEX ON ENTRY TO GRIDAL
+C
+C               OWIND(4)        WINDOW LIMITS IN WORLD COORDINATES
+C                               ON ENTRY TO GRIDAL
+C
+C               PY(2)           2 Y-COORDINATES FOR LINE TO BE DRAWN
+C                               VIA GKS ROUTINE GPL
+C
+C               PX(2)           2 X-COORDINATES FOR LINE TO BE DRAWN
+C                               VIA GKS ROUTINE GPL
+C
+C               START           IF DRAWING TICKS/GRIDS ON X-AXIS:
+C                                       Y-COORD OF ORIGIN OF EACH LINE;
+C                               IF DRAWING TICKS/GRIDS ON Y-AXIS:
+C                                       X-COORD OF ORIGIN OF EACH LINE
+C
+C               TICBIG          END OF MAJOR TICK LINE IN WORLD
+C                               COORDINATES
+C
+C               TICEND          END OF MINOR TICK LINE IN WORLD
+C                               COORDINATES
+C
+C               TICMAJ          LENGTH OF MAJOR TICKS IN WORLD
+C                               COORDINATES
+C
+C               TICMIN          LENGTH OF MINOR TICKS IN WORLD
+C                               COORDINATES
+C
+C               VIEW(4)         VIEWPORT LIMITS IN NDC PRIOR TO
+C                               EXPANSION FOR LABELLING
+C
+C               WIND(4)         SAME AS IN OWIND(4)
+C
+C               XCUR            A TICK/GRID IS DRAWN AT THIS POSITION
+C                               IF LOG SCALING IS IN EFFECT.
+C
+C               XDEC            LENGTH IN WORLD COORDINATES FROM
+C                               X-AXIS TO LABEL
+C
+C               XI              ALOG10(X), IF LOG SCALING
+C
+C               XINT            INTERVAL BETWEEN MINOR X-AXIS
+C                               TICKS/GRIDS IN WORLD COORDINATES
+C
+C               XINTM           INTERVAL BETWEEN MAJOR X-AXIS
+C                               TICKS/GRIDS IN WORLD COORDINATES
+C
+C               XMIRRO          LOGICAL FLAGS FOR MIRROR-IMAGE
+C
+C               XNUM            TOTAL NUMBER OF X-AXIS TICKS/GRIDS
+C                               WITH LINEAR SCALING
+C
+C               XPOS            IF LINEAR SCALING, KEEPS TRACK OF X-AXIS
+C                               POSITION FOR CURRENT TICK/GRID
+C
+C               XRANGE          TOTAL RANGE IN X DIRECTION IN WORLD
+C                               COORDINATES PRIOR TO EXPANSION FOR
+C                               LABELLING.
+C
+C               XRNEW           RANGE IN X DIRECTION IN WORLD
+C                               COORDINATES, AFTER EXPANSION
+C
+C               YCUR            A TICK/GRID IS DRAWN AT THIS POSITION
+C                               IF LOG SCALING IS IN EFFECT.
+C
+C               YDEC            LENGTH IN WORLD COORDINATES FROM
+C                               Y-AXIS TO LABEL
+C
+C               YI              ALOG10(Y), IF LOG SCALING
+C
+C               YINTM           INTERVAL BETWEEN MAJOR Y-AXIS
+C                               TICKS/GRIDS IN WORLD COORDINATES
+C
+C               YMIRRO          PLOTTING.
+C
+C               YNUM            TOTAL NUMBER OF Y-AXIS TICKS/GRIDS
+C                               WITH LINEAR SCALING
+C
+C               YPOS            IF LINEAR SCALING, KEEPS TRACK OF Y-AXIS
+C                               POSITION FOR CURRENT TICK/GRID
+C
+C               YRANGE          TOTAL RANGE IN Y DIRECTION IN WORLD
+C                               COORDINATES PRIOR TO EXPANSION FOR
+C                               LABELLING.
+C
+C               YRNEW           RANGE IN Y DIRECTION IN WORLD
+C                               COORDINATES, AFTER EXPANSION
+C
+C               XLAB,YLAB       IF LABELLING X-AXIS, Y-COORDINATE FOR
+C                               FOR TEXT POSITION;
+C                               IF LABELLING Y-AXIS, X-COORDINATE FOR
+C                               TEXT POSITION.
+C
+C
+C
+      CHARACTER*8 XFMT,YFMT
+      REAL WIND(4), VIEW(4), PX(2), PY(2), NWIND(4), OWIND(4)
+      REAL MAJX, MINX, MAJY, MINY
+      INTEGER TCOUNT, XTNUM, YTNUM, FIRST, LAST
+      INTEGER OPLASF, OTXASF, LASF(13), OCOLI, OTEXCI, OLDALH ,OLDALV
+      LOGICAL LGRID,LOGMIN
+      LOGICAL XMIRRO,YMIRRO
+      REAL MAJDIV, NEXTMA
+      CHARACTER*15 LABEL
+C
+      DATA TICMIN,TICMAJ,XCUR,YCUR,EXCUR,EYCUR/0.,0.,0.,0.,0.,0./
+C
+C +NOAO - Blockdata rewritten as run time initialization.
+C       EXTERNAL GRIDT
+	call gridt
+C -NOAO
+C  THE FOLLOWING IS FOR GATHERING STATISTICS ON LIBRARY USE AT NCAR.
+C
+      CALL Q8QST4('GRAPHX','GRIDAL','GRIDAL','VERSION 01')
+      XRNEW = 0.
+      YRNEW = 0.
+C
+C  INITIALIZE ERROR COUNT.
+C
+      NERR = 0
+C
+C  CHECK FOR BAD VALUES OF IGPH.
+C
+      IF (IGPH.LT.0.OR.IGPH.EQ.3.OR.IGPH.EQ.7.OR.IGPH.GT.10) THEN
+          NERR = NERR + 1
+          CALL SETER(' GRIDAL--INVALID IGPH VALUE',NERR,2)
+      ENDIF
+C
+C  GET STANDARD ERROR MESSAGE UNIT
+C
+      IERUNT = I1MACH(4)
+      XMIRRO = .FALSE.
+      YMIRRO = .FALSE.
+C
+C  SET POLYLINE COLOR ASF TO INDIVIDAUL.
+C
+      CALL GQASF(IERR,LASF)
+      OPLASF = LASF(3)
+      LASF(3) = 1
+      OTXASF = LASF(10)
+      LASF(10) = 1
+      CALL GSASF(LASF)
+C
+C  INQUIRE CURRENT POLYLINE COLOR INDEX.
+C
+      CALL GQPLCI(IERR,OCOLI)
+C
+C  SET POLYLINE COLOR TO THE VALUE SPECIFIED IN COMMON.
+C
+      CALL GSPLCI(IGRIMJ)
+C
+C  INQUIRE CURRENT NORMALIZATION TRANSFORMATION NUMBER.
+C
+      CALL GQCNTN(IERR,ICNT)
+C
+C  INQUIRE CURRENT WINDOW AND VIEWPORT LIMITS.
+C
+      CALL GQNT(ICNT,IERR,WIND,VIEW)
+C
+C  STORE WINDOW VALUES
+C
+      DO 10 I = 1,4
+      OWIND(I) = WIND(I)
+   10 CONTINUE
+C
+C  LOG OR LINEAR SCALING?
+C
+C           1 = X LINEAR, Y LINEAR
+C           2 = X LINEAR, Y LOG
+C           3 = X LOG, Y LINEAR
+C           4 = X LOG, Y LOG
+C
+      CALL GETUSV('LS',LOGVAL)
+C
+C  ADJUST WINDOW TO ACCOUNT FOR LOG SCALING.
+C
+      IF (LOGVAL .EQ. 2) THEN
+        WIND(3) = 10.**WIND(3)
+        WIND(4) = 10.**WIND(4)
+      ELSE IF (LOGVAL .EQ. 3) THEN
+        WIND(1) = 10.**WIND(1)
+        WIND(2) = 10.**WIND(2)
+      ELSE IF (LOGVAL .EQ. 4) THEN
+        WIND(1) = 10.**WIND(1)
+        WIND(2) = 10.**WIND(2)
+        WIND(3) = 10.**WIND(3)
+        WIND(4) = 10.**WIND(4)
+      ENDIF
+C
+C  DETERMINE IF MIRROR-IMAGE MAPPING IS REQUIRED.
+C
+      IF (WIND(1) .GT. WIND(2)) THEN
+        XMIRRO = .TRUE.
+      ENDIF
+      IF (WIND(3) .GT. WIND(4)) THEN
+        YMIRRO = .TRUE.
+      ENDIF
+C
+C  IF IGPH=10, CHECK FOR X(Y) VALUES IN RANGE (IF NOT, CHANGE TO
+C  DEFAULT.
+C
+      IF (IGPH .EQ. 10) THEN
+        XI = X
+        YI = Y
+        IF (((XI .LT. WIND(1) .OR. XI .GT. WIND(2)) .AND. .NOT.
+     1  XMIRRO) .OR. (XMIRRO.AND.(XI.GT.WIND(1).OR.XI.LT.WIND(2))))
+     2  THEN
+          NERR = NERR + 1
+          CALL SETER(' GRIDAL--X VALUE OUT OF WINDOW RANGE',NERR,1)
+C +NOAO - FTN writes and format statements deleted.  Call to SETER okay.
+C
+C         WRITE(IERUNT,1001)NERR
+C1001     FORMAT(' ERROR',I3,' IN GRIDAL--X VALUE OUT OF WINDOW RANGE')
+          CALL ERROF
+          XI = WIND(1)
+        ENDIF
+        IF (((YI .LT. WIND(3) .OR. YI .GT. WIND(4)) .AND. .NOT.
+     1  YMIRRO).OR.(YMIRRO.AND.(YI.GT.WIND(3).OR.YI.LT.WIND(4))))
+     2  THEN
+          NERR = NERR + 1
+          CALL SETER(' GRIDAL--Y VALUE OUT OF WINDOW RANGE',NERR,1)
+C         WRITE(IERUNT,1002)NERR
+C1002     FORMAT(' ERROR',I3,' IN GRIDAL--Y VALUE OUT OF WINDOW RANGE')
+C -NOAO
+          CALL ERROF
+          YI = WIND(3)
+        ENDIF
+      ENDIF
+      MX = MAJRX
+      MY = MAJRY
+      IF (LOGVAL .EQ. 4 .OR. LOGVAL .EQ. 3) THEN
+        IF (MX .LT. 1) MX = 1
+        IF (WIND(1) .LE. 0.) THEN
+          NERR = NERR + 1
+          CALL SETER(' GRIDAL--NON-POSITIVE WINDOW BOUNDARY WITH LOG SCA
+     1LING',NERR,2)
+        ELSE
+          WIND(1) = ALOG10(WIND(1))
+        ENDIF
+        IF (WIND(2) .LE. 0.) THEN
+          NERR = NERR + 1
+          CALL SETER(' GRIDAL--NON-POSITIVE WINDOW BOUNDARY WITH LOG SCA
+     1LING',NERR,2)
+        ELSE
+          WIND(2) = ALOG10(WIND(2))
+        ENDIF
+        IF (IGPH .EQ. 10) THEN
+          XI = ALOG10(XI)
+        ENDIF
+      ENDIF
+C
+      IF(LOGVAL .EQ. 4 .OR. LOGVAL .EQ. 2) THEN
+        IF (MY .LT. 1) MY = 1
+        IF (WIND(3) .LE. 0.) THEN
+          NERR = NERR + 1
+          CALL SETER(' GRIDAL--NON-POSITIVE WINDOW BOUNDARY WITH LOG SCA
+     1LING',NERR,2)
+        ELSE
+          WIND(3) = ALOG10(WIND(3))
+        ENDIF
+        IF (WIND(4) .LE. 0.) THEN
+          NERR = NERR + 1
+          CALL SETER(' GRIDAL--NON-POSITIVE WINDOW BOUNDARY WITH LOG SCA
+     1LING',NERR,2)
+        ELSE
+          WIND(4) = ALOG10(WIND(4))
+        ENDIF
+        IF (IGPH .EQ. 10) THEN
+          YI = ALOG10(YI)
+        ENDIF
+      ENDIF
+C
+C  DEFINE NORMALIZATION TRANSFORMATION NUMBER 1.
+C
+      CALL GSWN(1,WIND(1),WIND(2),WIND(3),WIND(4))
+      CALL GSVP(1,VIEW(1),VIEW(2),VIEW(3),VIEW(4))
+      CALL GSELNT(1)
+C
+C  CALCULATE X AND Y WORLD COORDINATE RANGES.
+C
+      XRANGE = WIND(2) - WIND(1)
+      YRANGE = WIND(4) - WIND(3)
+C
+C  IF LABELS ARE REQUESTED, INQUIRE AND SAVE TEXT ATTRIBUTES.
+C
+      IF (IXLAB .EQ. 1 .OR. IYLAB .EQ. 1) THEN
+        CALL GQCHH(IERR,OLDCHH)
+        CALL GQCHUP(IERR,CHUPX,CHUPY)
+        CALL GQTXAL(IERR,OLDALH,OLDALV)
+        CALL GQTXCI (IERR,OTEXCI)
+        CALL GSTXCI (IGRITX)
+C
+C  EXPAND WINDOW AND VIEWPORT FOR LABELS AND CALCULATE NEW
+C  X AND Y WORLD COORDINATE RANGES.
+C
+        CALL EXPAND(NWIND)
+        XRNEW = NWIND(2) - NWIND(1)
+        YRNEW = NWIND(4) - NWIND(3)
+C
+C  SET CHARACTER HEIGHT (1% OF Y RANGE.)
+C
+        CHARH = SIZX * YRNEW
+        IF (YMIRRO) THEN
+          CHARH = -CHARH
+        ENDIF
+        CALL GSCHH(CHARH)
+      ENDIF
+C
+      IF (IGPH .EQ. 0) GOTO 50
+C
+C  CALCULATE TIC LENGTH.
+C
+C  IF NO LABELS AND TICK4 (OR TICKS) WERE NOT CALLED.
+C
+      IF (MAJX .EQ. 0.) THEN
+        MAJX = .013
+        MINX = .007
+        TICMIN = MINX * YRANGE
+        TICMAJ = MAJX * YRANGE
+      ELSE
+C
+C  EXPAND WINDOW IF NOT ALREADY EXPANDED.
+C  (IF LABMOD WAS NOT CALLED BUT TICK4(S) WAS.)
+C
+        IF (IXLAB.NE.1 .AND. IYLAB.NE.1) THEN
+          CALL EXPAND (NWIND)
+          XRNEW = NWIND(2) - NWIND(1)
+          YRNEW = NWIND(4) - NWIND(3)
+        ENDIF
+        TICMIN = MINX * YRNEW
+        TICMAJ = MAJX * YRNEW
+      ENDIF
+C
+C  **** X-AXIS TICS/GRIDS AND LABELS ****
+C
+C  CALCULATE TIC/GRID INTERVALS ON X AXIS.
+C
+  50  IF (IXLAB .EQ. -1) GOTO 175
+      MINCNT = MINRX
+      IF (LOGVAL .EQ. 1 .OR. LOGVAL .EQ. 2) THEN
+        LOGMIN = .FALSE.
+        XINTM = XRANGE/MX
+        XINT = XINTM
+        IF (MINCNT .GT. 1) THEN
+          XINT = XINT/MINCNT
+        ENDIF
+C
+C  CALCULATE TOTAL NUMBER OF TICS/GRIDS ON AXIS.
+C
+        XTNUM = MX * MINCNT
+        IF (MINCNT .EQ. 0) XTNUM = MX
+      ELSE
+        XTNUM = 50
+        XCUR = 10.**OWIND(1)
+        MAJDIV = 10 ** MX
+        IF (MINCNT .LE. 10 .AND. MX .LE. 1) THEN
+          LOGMIN = .TRUE.
+          CURMAJ = XCUR
+          NEXTMA = XCUR * MAJDIV
+          XINT = (NEXTMA - CURMAJ) / 9.
+          MINCNT = 9
+        ELSE
+          LOGMIN = .FALSE.
+          MINCNT = 1
+        ENDIF
+      ENDIF
+C
+      LGRID = .FALSE.
+      LOOP = 1
+C
+C  DETERMINE ORIGIN OF TICK/GRID LINES (Y COORDINATE.)
+C
+      IF (IGPH .NE. 10) THEN
+        START = WIND(3)
+      ELSE
+        START = YI
+      ENDIF
+C
+      XPOS = WIND(1)
+      PY(1) = START
+      TICEND = START + TICMIN
+      TICBIG = START + TICMAJ
+C
+      PX(1) = XPOS
+      PX(2) = PX(1)
+C
+C  DRAW LEFT-MOST TICK ON X-AXIS (IF IGPH = 10 AND
+C  INTERSECTION OF AXES IS NOT AT BOTTOM LEFT OF WINDOW.)
+C
+      IF (IGPH .EQ. 10) THEN
+        IF (XI .NE. WIND(1)) THEN
+          PY(2) = TICBIG
+          CALL GPL(2,PX,PY)
+        ENDIF
+C
+C  DRAW X-AXIS FOR IGPH = 10
+C
+        PX(2) = WIND(2)
+        PY(2) = PY(1)
+        CALL GPL(2,PX,PY)
+        PX(2) = PX(1)
+      ELSE
+C
+C  DRAW Y-AXIS FOR ANY OTHER IGPH (FIRST TICK.)
+C
+        PY(2) = WIND(4)
+        CALL GPL(2,PX,PY)
+      ENDIF
+C
+C  TICKS OR GRIDS ?
+C
+      IF (IGPH .EQ. 0 .OR. IGPH .EQ. 1 .OR. IGPH .EQ.2) THEN
+        PY(2) = WIND(4)
+        LGRID = .TRUE.
+      ELSE
+        PY(2) = TICEND
+      ENDIF
+C
+      IF (IXLAB .EQ. 1) THEN
+C
+C  IF VERTICAL X-AXIS LABEL ORIENTATION, THEN SET CHAR UP VECTOR
+C  TO BE VERTICAL AND TEXT ALIGNMENT TO (RIGHT,HALF),
+C  OTHERWISE TO (CENTER,TOP)
+C
+        IF (YMIRRO) THEN
+          IF (IXORI .EQ. 1) THEN
+            CALL GSCHUP(1.,0.)
+            CALL GSTXAL(3,3)
+          ELSE
+            CALL GSCHUP(0.,-1.)
+            CALL GSTXAL(2,1)
+          ENDIF
+        ELSE
+          IF (IXORI .EQ. 1) THEN
+            CALL GSCHUP(-1.,0.)
+            CALL GSTXAL(3,3)
+          ELSE
+            CALL GSTXAL(2,1)
+          ENDIF
+        ENDIF
+        IF (XDEC.NE.0. .AND. XDEC.NE.1.) THEN
+          DEC = XDEC * YRNEW
+        ELSE
+          DEC = .02 * YRNEW
+        ENDIF
+        IF (XDEC .NE. 1.) THEN
+          XLAB = START - DEC
+        ELSE
+          IF (IGPH .NE. 10) THEN
+            XLAB = WIND(4)+DEC
+          ELSE
+            XLAB = YI+DEC
+          ENDIF
+C
+C  IF LABELS ARE ON TOP OF THE X-AXIS, SET THE TEXT
+C  ALIGNMENT TO (LEFT,HALF) IF THE X-AXIS LABELS ARE
+C  VERTICAL, OTHERWISE TO (CENTER,BASE).
+C
+          IF (IXORI .EQ. 1) THEN
+            CALL GSTXAL(1,3)
+          ELSE
+            CALL GSTXAL(2,4)
+          ENDIF
+        ENDIF
+        IF (LOGVAL .EQ. 1 .OR. LOGVAL .EQ. 2) THEN
+C +NOAO
+C         WRITE(LABEL,XFMT)XPOS
+          call encode (10, xfmt, label, xpos)
+C -NOAO
+        ELSE
+C +NOAO
+C         WRITE(LABEL,XFMT)XCUR
+          call encode (10, yfmt, label, xcur)
+C -NOAO
+        ENDIF
+        CALL CHSTR(LABEL,FIRST,LAST)
+        CALL GTX (XPOS,XLAB,LABEL(FIRST:LAST))
+      ENDIF
+C
+ 80   TCOUNT = 1
+C
+      DO 100 I = 1,XTNUM
+      IF (LOGVAL .EQ. 1 .OR. LOGVAL .EQ. 2) THEN
+        XPOS = XPOS + XINT
+      ELSE
+        IF (.NOT. LOGMIN) THEN
+          XCUR = XCUR * MAJDIV
+        ELSE
+          IF (TCOUNT .NE. MINCNT) THEN
+            XCUR = XCUR + XINT
+          ELSE
+            XCUR = XCUR + XINT
+            CURMAJ = NEXTMA
+            NEXTMA = CURMAJ * MAJDIV
+            XINT = (NEXTMA - CURMAJ) / 9.
+          ENDIF
+        ENDIF
+        IF (XCUR .GT. 10.**OWIND(2)-.1*XINT) THEN
+          XPOS = WIND(2)
+        ELSE
+          XPOS = ALOG10(XCUR)
+        ENDIF
+      ENDIF
+C
+      PX(1) = XPOS
+      PX(2) = XPOS
+C
+C  IF IGPH = 0,1,2,4,5,8 OR 9 AND XPOS=RIGHT AXIS, THEN
+C  DRAW AXIS, ELSE IF IGPH = 6 OR 10 DRAW TIC AND LABEL.
+C
+      IF (LOGVAL .EQ. 3 .OR. LOGVAL .EQ. 4) EXCUR = 10.**OWIND(2)
+C
+      IF ((((LOGVAL .EQ. 1.OR.LOGVAL.EQ.2) .AND. (I .EQ. XTNUM))
+     1 .OR.((LOGVAL .EQ.4 .OR.LOGVAL .EQ.3).AND.XCUR.GE.EXCUR-.1*XINT))
+     2 .AND.(IGPH.NE.6.AND.IGPH.NE.10)) THEN
+        IF (LOOP .EQ. 1) THEN
+          PY(2) = WIND(4)
+          CALL GPL(2,PX,PY)
+          IF (IXLAB .EQ. 1) THEN
+            IF (LOGVAL.EQ.1 .OR. LOGVAL.EQ.2) THEN
+C (NOAO)      WRITE(LABEL,XFMT) XPOS
+              call encode (10, xfmt, label, xpos)
+            ELSE
+              IF (XCUR .GT. EXCUR+.1*XINT) THEN
+                GOTO 101
+              ELSE
+C (NOAO)        WRITE(LABEL,XFMT) XCUR
+                call encode (10, xfmt, label, xcur)
+              ENDIF
+            ENDIF
+            CALL CHSTR(LABEL,FIRST,LAST)
+            CALL GTX (XPOS,XLAB,LABEL(FIRST:LAST))
+          ENDIF
+        ENDIF
+        GOTO 101
+      ENDIF
+      IF ((LOGVAL.EQ.4 .OR. LOGVAL.EQ.3) .AND. XCUR.GT.EXCUR+.1*XINT)
+     1    GOTO 101
+C
+C  MINOR TIC/GRID ?
+C
+      IF (TCOUNT .NE. MINCNT .AND. MINCNT .NE. 0) THEN
+        IF (LGRID) THEN
+          CALL GSPLCI(IGRIMN)
+        ENDIF
+        CALL GPL(2,PX,PY)
+        IF (LGRID) THEN
+          CALL GSPLCI(IGRIMJ)
+        ENDIF
+        TCOUNT = TCOUNT + 1
+C
+C  MAJOR TIC/GRID
+C
+      ELSE
+        IF (.NOT. LGRID) THEN
+          PY(2) = TICBIG
+        ENDIF
+        CALL GPL(2,PX,PY)
+C
+C  LABEL.
+C
+        IF (IXLAB .EQ. 1 .AND. LOOP .EQ. 1) THEN
+          IF (LOGVAL .EQ. 1 .OR. LOGVAL .EQ. 2) THEN
+C (NOAO)    WRITE(LABEL,XFMT)XPOS
+            call encode (10, xfmt, label, xpos)
+          ELSE
+C (NOAO)    WRITE(LABEL,XFMT)XCUR
+            call encode (10, xfmt, label, xcur)
+          ENDIF
+          CALL CHSTR(LABEL,FIRST,LAST)
+          CALL GTX (XPOS,XLAB,LABEL(FIRST:LAST))
+        ENDIF
+        TCOUNT = 1
+        IF (.NOT. LGRID) THEN
+          PY(2) = TICEND
+        ENDIF
+      ENDIF
+      IF ((LOGVAL .EQ. 4 .OR. LOGVAL .EQ. 3) .AND.
+     1     XCUR .GE. EXCUR-.1*XINT) GOTO 101
+ 100  CONTINUE
+ 101  CONTINUE
+C
+C  TOP X-AXIS TICKS ?
+C
+      IF (LOOP.EQ.1 .AND. (IGPH.EQ.4 .OR. IGPH.EQ.5 .OR. IGPH.EQ.6))
+     1  THEN
+        START = WIND(4)
+        TICEND = START - TICMIN
+        TICBIG = START - TICMAJ
+        PY(1) = START
+        PY(2) = TICEND
+        XPOS = WIND(1)
+        LOOP = 2
+        IF (LOGVAL .EQ. 4 .OR. LOGVAL .EQ.3) THEN
+          XCUR = 10.**OWIND(1)
+          IF (LOGMIN) THEN
+            CURMAJ = XCUR
+            NEXTMA = XCUR * MAJDIV
+            XINT = (NEXTMA - CURMAJ) / 9.
+          ENDIF
+        ENDIF
+        GOTO 80
+      ENDIF
+C
+C  **** Y-AXIS TICS/GRIDS AND LABELS ****
+C
+  175 IF (IYLAB .EQ. -1) GOTO 999
+C
+C  CALCULATE Y-AXIS TICS
+C
+      MINCNT = MINRY
+      IF (LOGVAL .EQ. 1 .OR. LOGVAL .EQ. 3) THEN
+        LOGMIN = .FALSE.
+        YINTM = YRANGE/MY
+        YINT = YINTM
+        IF (MINCNT .GT. 1) THEN
+          YINT = YINT/MINCNT
+        ENDIF
+        YTNUM = MY * MINCNT
+        IF (MINCNT .EQ. 0) YTNUM = MY
+      ELSE
+        YTNUM = 50
+        YCUR = 10.**OWIND(3)
+        MAJDIV = 10 ** MY
+        IF (MINCNT .LE. 10 .AND. MY .LE. 1) THEN
+          LOGMIN = .TRUE.
+          CURMAJ = YCUR
+          NEXTMA = YCUR * MAJDIV
+          YINT = (NEXTMA - CURMAJ) / 9.
+          MINCNT = 9
+        ELSE
+          LOGMIN = .FALSE.
+          MINCNT = 1
+        ENDIF
+      ENDIF
+C
+      LGRID = .FALSE.
+      LOOP = 1
+C
+C  DETERMINE ORIGIN OF TICK/GRID LINES (X COORDINATE.)
+C
+      IF (IGPH .NE. 10) THEN
+        START = WIND(1)
+      ELSE
+        START = XI
+      ENDIF
+C
+      YPOS = WIND(3)
+      PX(1) = START
+C
+C  DETERMINE Y-AXIS TICK LENGTHS.
+C
+      IF (MAJY .EQ. 0.) THEN
+        MAJY = .013
+        MINY = .007
+      ENDIF
+      IF (XRNEW .EQ. 0.) THEN
+        TICMIN = MINY * XRANGE
+        TICMAJ = MAJY * XRANGE
+      ELSE
+        TICMIN = MINY * XRNEW
+        TICMAJ = MAJY * XRNEW
+      ENDIF
+      TICEND = START + TICMIN
+      TICBIG = START + TICMAJ
+C
+      PY(1) = YPOS
+      PY(2) = PY(1)
+C
+C  DRAW BOTTOM-MOST TICK ON Y-AXIS IF (IGPH = 10
+C  AND INTERSECTION OF AXES IS NOT AT BOTTOM LEFT
+C  OF WINDOW.)
+C
+      IF (IGPH .EQ. 10) THEN
+        IF (YI .NE. WIND(3)) THEN
+          PX(2) = TICBIG
+          CALL GPL(2,PX,PY)
+        ENDIF
+C
+C  DRAW Y-AXIS FOR IGPH = 10
+C
+        PY(2) = WIND(4)
+        PX(2) = PX(1)
+        CALL GPL(2,PX,PY)
+        PY(2) = PY(1)
+      ELSE
+C
+C  DRAW X-AXIS FOR ANY OTHER IGPH (FIRST TICK.)
+C
+        PX(2) = WIND(2)
+        CALL GPL(2,PX,PY)
+      ENDIF
+C
+C  GRIDS OR TICS ?
+C
+      IF ((IGPH .EQ. 0 .OR. IGPH .EQ. 4).OR. IGPH .EQ. 8) THEN
+        PX(2) = WIND(2)
+        LGRID = .TRUE.
+      ELSE
+        PX(2) = TICEND
+      ENDIF
+C
+C  SET TEXT ATTRIBUTES IF Y-AXIS IS TO BE LABELLED.
+C
+      IF (IYLAB .EQ. 1) THEN
+        IF (IXORI .EQ. 1) THEN
+          IF (YMIRRO) THEN
+            CALL GSCHUP(0.,-1.)
+          ELSE
+            CALL GSCHUP(0.,1.)
+          ENDIF
+        ENDIF
+C
+C  SET TEXT ALIGNMENT TO (RIGHT,HALF)
+C
+        CALL GSTXAL(3,3)
+C
+C  RECALCULATE CHARACTER HEIGHT IF Y-AXIS LABELS ARE OF DIFFERENT
+C  SIZE FORM X-AXIS LABELS.
+C
+        CHARH = SIZY * YRNEW
+        IF (YMIRRO) THEN
+          CHARH = -CHARH
+        ENDIF
+        CALL GSCHH(CHARH)
+        IF (YDEC .NE. 0. .AND. YDEC .NE. 1.) THEN
+          DEC = YDEC * XRNEW
+        ELSE
+          DEC = .02 * XRNEW
+        ENDIF
+        IF (YDEC .NE. 1.) THEN
+          YLAB = START - DEC
+        ELSE
+          IF (IGPH .NE. 10) THEN
+            YLAB = WIND(2)+DEC
+          ELSE
+            YLAB = XI+DEC
+          ENDIF
+C
+C  SET TEXT ALIGNMENT TO (LEFT,HALF) IF LABELLING ON RIGHT OF Y-AXIS.
+C
+          CALL GSTXAL(1,3)
+        ENDIF
+        IF (LOGVAL .EQ. 1 .OR. LOGVAL .EQ.3) THEN
+C (NOAO)  WRITE(LABEL,YFMT)YPOS
+          call encode (10, yfmt, label, ypos)
+        ELSE
+C (NOAO)  WRITE(LABEL,YFMT)YCUR
+          call encode (10, yfmt, label, ycur)
+        ENDIF
+        CALL CHSTR(LABEL,FIRST,LAST)
+        CALL GTX (YLAB,YPOS,LABEL(FIRST:LAST))
+      ENDIF
+C
+ 180  TCOUNT = 1
+C
+      DO 200 I = 1,YTNUM
+      IF (LOGVAL .EQ. 1 .OR. LOGVAL .EQ. 3) THEN
+        YPOS = YPOS + YINT
+      ELSE
+        IF (.NOT. LOGMIN) THEN
+          YCUR = YCUR * MAJDIV
+        ELSE
+          IF (TCOUNT .NE. MINCNT) THEN
+            YCUR = YCUR + YINT
+          ELSE
+            YCUR = YCUR + YINT
+            CURMAJ = NEXTMA
+            NEXTMA = CURMAJ * MAJDIV
+            YINT = (NEXTMA - CURMAJ) / 9.
+          ENDIF
+        ENDIF
+        IF (YCUR .GT. 10.**OWIND(4)-.1*YINT) THEN
+          YPOS = WIND(4)
+        ELSE
+          YPOS = ALOG10(YCUR)
+        ENDIF
+      ENDIF
+C
+      PY(1) = YPOS
+      PY(2) = YPOS
+C
+C IF IGPH = 0,1,2,4,5,6 OR 8 AND YPOS = TOP AXIS, THEN
+C DRAW AXIS, ELSE IF IGPH = 9 OR 10 DRAW TIC.
+C
+      IF (LOGVAL .EQ. 3 .OR. LOGVAL .EQ. 4) EYCUR = 10.**OWIND(4)
+C
+      IF ((((LOGVAL .EQ. 1.OR.LOGVAL.EQ.3) .AND. (I .EQ. YTNUM))
+     1 .OR.((LOGVAL .EQ.4 .OR.LOGVAL .EQ.2).AND.YCUR.GE.EYCUR-.1*YINT))
+     2 .AND.(IGPH.NE.9.AND.IGPH.NE.10)) THEN
+        IF (LOOP .EQ. 1) THEN
+          PX(2) = WIND(2)
+          CALL GPL(2,PX,PY)
+          IF (IYLAB .EQ. 1) THEN
+            IF (LOGVAL .EQ. 1 .OR. LOGVAL .EQ.3) THEN
+C (NOAO)      WRITE(LABEL,YFMT)YPOS
+              call encode (10, yfmt, label, ypos)
+            ELSE
+              IF (YCUR .GT. EYCUR+.1*YINT) THEN
+                GOTO 201
+              ELSE
+C (NOAO)        WRITE(LABEL,YFMT)YCUR
+                call encode (10, yfmt, label, ycur)
+              ENDIF
+            ENDIF
+            CALL CHSTR(LABEL,FIRST,LAST)
+            CALL GTX (YLAB,YPOS,LABEL(FIRST:LAST))
+          ENDIF
+        ENDIF
+        GOTO 201
+      ENDIF
+      IF ((LOGVAL.EQ.4 .OR. LOGVAL.EQ.2) .AND. YCUR.GT.EYCUR+.1*YINT)
+     1  GOTO 201
+C
+C  MINOR TIC/GRID ?
+C
+      IF (TCOUNT .NE. MINCNT .AND. MINCNT .NE. 0) THEN
+        IF (LGRID) THEN
+          CALL GSPLCI(IGRIMN)
+        ENDIF
+        CALL GPL(2,PX,PY)
+        IF (LGRID) THEN
+          CALL GSPLCI(IGRIMJ)
+        ENDIF
+        TCOUNT = TCOUNT + 1
+C
+C  MAJOR TIC/GRID.
+C
+      ELSE
+        IF (.NOT. LGRID) THEN
+          PX(2) = TICBIG
+        ENDIF
+        CALL GPL(2,PX,PY)
+C
+C  LABEL.
+C
+        IF (IYLAB .EQ. 1 .AND. LOOP .EQ.1) THEN
+          IF (LOGVAL .EQ. 1 .OR. LOGVAL .EQ.3) THEN
+C (NOAO)   WRITE(LABEL,YFMT)YPOS
+           call encode (10, yfmt, label, ypos)
+          ELSE
+C (NOAO)    WRITE(LABEL,YFMT)YCUR
+            call encode (10, yfmt, label, ycur)
+          ENDIF
+          CALL CHSTR(LABEL,FIRST,LAST)
+          CALL GTX(YLAB,YPOS,LABEL(FIRST:LAST))
+        ENDIF
+        TCOUNT = 1
+        IF (.NOT. LGRID) THEN
+          PX(2) = TICEND
+        ENDIF
+      ENDIF
+      IF ((LOGVAL .EQ. 4 .OR. LOGVAL .EQ. 2) .AND.
+     -     YCUR .GE. EYCUR-.1*YINT)
+     1   GOTO 201
+  200 CONTINUE
+  201 CONTINUE
+C
+C  RIGHT Y-AXIS TICKS ?
+C
+      IF (LOOP .EQ. 1 .AND.(IGPH.EQ.1 .OR. IGPH .EQ. 5 .OR.
+     1  IGPH .EQ. 9)) THEN
+        START = WIND(2)
+        TICEND = START - TICMIN
+        TICBIG = START - TICMAJ
+        PX(1) = START
+        PX(2) = TICEND
+        YPOS = WIND(3)
+        LOOP = 2
+        IF (LOGVAL .EQ. 4 .OR. LOGVAL .EQ. 2) THEN
+          YCUR = 10.**OWIND(3)
+          IF (LOGMIN) THEN
+            CURMAJ = YCUR
+            NEXTMA = YCUR * MAJDIV
+            YINT = (NEXTMA - CURMAJ) / 9.
+          ENDIF
+        ENDIF
+        GOTO 180
+      ENDIF
+C
+C  RESET NORMALIZATION TRANSFORMATION TO WHAT IT WAS UPON ENTRY.
+C
+      IF (ICNT .NE. 0) THEN
+        CALL GSWN(ICNT,OWIND(1),OWIND(2),OWIND(3),OWIND(4))
+        CALL GSVP(ICNT,VIEW(1),VIEW(2),VIEW(3),VIEW(4))
+      ENDIF
+      CALL GSELNT(ICNT)
+C
+C  IF LABELS, RESTORE TEXT ATTRIBUTES.
+C
+      IF (IXLAB .EQ. 1 .OR. IYLAB .EQ. 1) THEN
+        CALL GSCHH(OLDCHH)
+        CALL GSCHUP(CHUPX,CHUPY)
+        CALL GSTXAL(OLDALH,OLDALV)
+        CALL GSTXCI(OTEXCI)
+      ENDIF
+C
+C  RESTORE ORIGINAL COLOR.
+C
+      CALL GSPLCI(OCOLI)
+C
+C  RESTORE POLYLINE COLOR ASF TO WHAT IS WAS ON ENTRY.
+C
+      LASF(10) = OTXASF
+      LASF(3) = OPLASF
+      CALL GSASF(LASF)
+C
+ 999  RETURN
+      END
+      SUBROUTINE GRID(MAJRX,MINRX,MAJRY,MINRY)
+C
+      COMMON /LAB/ SIZX,SIZY,XDEC,YDEC,IXORI
+      COMMON /CLAB/ XFMT, YFMT
+      COMMON /TICK/ MAJX, MINX, MAJY, MINY
+      COMMON /GRIINT/ IGRIMJ, IGRIMN, IGRITX
+      CHARACTER*8 XFMT,YFMT
+      REAL MAJX,MINX,MAJY,MINY
+C
+C  THE FOLLOWING IS FOR GATHERING STATISTICS ON LIBRARY USE AT NCAR
+C
+      CALL Q8QST4('GRAPHX','GRIDAL','GRID','VERSION 01')
+C
+      CALL GRIDAL(MAJRX,MINRX,MAJRY,MINRY,0,0,0,0.,0.)
+      RETURN
+      END
+      SUBROUTINE GRIDL(MAJRX,MINRX,MAJRY,MINRY)
+C
+      COMMON /LAB/ SIZX,SIZY,XDEC,YDEC,IXORI
+      COMMON /CLAB/ XFMT, YFMT
+      COMMON /TICK/ MAJX, MINX, MAJY, MINY
+      COMMON /GRIINT/ IGRIMJ, IGRIMN, IGRITX
+      CHARACTER*8 XFMT,YFMT
+      REAL MAJX,MINX,MAJY,MINY
+C
+C  THE FOLLOWING IS FOR GATHERING STATISTICS ON LIBRARY USE AT NCAR
+C
+      CALL Q8QST4('GRAPHX','GRIDAL','GRIDL','VERSION 01')
+C
+      CALL GRIDAL(MAJRX,MINRX,MAJRY,MINRY,1,1,0,0.,0.)
+      RETURN
+      END
+      SUBROUTINE PERIM(MAJRX,MINRX,MAJRY,MINRY)
+C
+      COMMON /LAB/ SIZX,SIZY,XDEC,YDEC,IXORI
+      COMMON /CLAB/ XFMT, YFMT
+      COMMON /TICK/ MAJX, MINX, MAJY, MINY
+      COMMON /GRIINT/ IGRIMJ, IGRIMN, IGRITX
+      CHARACTER*8 XFMT,YFMT
+      REAL MAJX,MINX,MAJY,MINY
+C
+C  THE FOLLOWING IS FOR GATHERING STATISTICS ON LIBRARY USE AT NCAR
+C
+      CALL Q8QST4('GRAPHX','GRIDAL','PERIM','VERSION 01')
+C
+      CALL GRIDAL(MAJRX,MINRX,MAJRY,MINRY,0,0,5,0.,0.)
+      RETURN
+      END
+      SUBROUTINE PERIML(MAJRX,MINRX,MAJRY,MINRY)
+C
+      COMMON /LAB/ SIZX,SIZY,XDEC,YDEC,IXORI
+      COMMON /CLAB/ XFMT, YFMT
+      COMMON /TICK/ MAJX, MINX, MAJY, MINY
+      COMMON /GRIINT/ IGRIMJ, IGRIMN, IGRITX
+      CHARACTER*8 XFMT,YFMT
+      REAL MAJX,MINX,MAJY,MINY
+C
+C  THE FOLLOWING IS FOR GATHERING STATISTICS ON LIBRARY USE AT NCAR
+C
+      CALL Q8QST4('GRAPHX','GRIDAL','PERIML','VERSION 01')
+C
+      CALL GRIDAL(MAJRX,MINRX,MAJRY,MINRY,1,1,5,0.,0.)
+      RETURN
+      END
+      SUBROUTINE HALFAX(MAJRX,MINRX,MAJRY,MINRY,X,Y,IXLAB,IYLAB)
+C
+      COMMON /LAB/ SIZX,SIZY,XDEC,YDEC,IXORI
+      COMMON /CLAB/ XFMT, YFMT
+      COMMON /TICK/ MAJX, MINX, MAJY, MINY
+      COMMON /GRIINT/ IGRIMJ, IGRIMN, IGRITX
+      CHARACTER*8 XFMT,YFMT
+      REAL MAJX,MINX,MAJY,MINY
+C
+C  THE FOLLOWING IS FOR GATHERING STATISTICS ON LIBRARY USE AT NCAR
+C
+      CALL Q8QST4('GRAPHX','GRIDAL','HALFAX','VERSION 01')
+C
+      CALL GRIDAL(MAJRX,MINRX,MAJRY,MINRY,IXLAB,IYLAB,10,X,Y)
+      RETURN
+      END
+      SUBROUTINE LABMOD(FMTX,FMTY,NUMX,NUMY,ISIZX,ISIZY,IXDEC,IYDEC,
+     1                  IXOR)
+C
+C  RESETS PARAMETERS FOR TEXT GRAPHICS FROM DEFAULT VALUES.
+C
+      COMMON /LAB/ SIZX,SIZY,XDEC,YDEC,IXORI
+      COMMON /CLAB/ XFMT, YFMT
+      CHARACTER*8 XFMT,YFMT,FMTX,FMTY
+C
+C  THE FOLLOWING IS FOR GATHERING STATISTICS ON LIBRARY USE AT NCAR
+C
+      CALL Q8QST4('GRAPHX','GRIDAL','LABMOD','VERSION 01')
+C
+C
+C +NOAO - Blockdata rewritten as run time initialization.
+C       EXTERNAL GRIDT
+	call gridt
+C -NOAO
+      XFMT = '        '
+      YFMT = '        '
+      XFMT = FMTX
+      YFMT = FMTY
+C
+      CALL GETUSV('XF',IVAL)
+      XRANGE = 2. ** IVAL
+      CALL GETUSV('YF', IVAL)
+      YRANGE = 2. ** IVAL
+C
+C  SIZX AND SIZY ARE COMPUTED TO BE PERCENTAGES OF TOTAL SCREEN
+C  WIDTH.
+C
+      IF (ISIZX .GT. 3) THEN
+        SIZX = FLOAT(ISIZX)/XRANGE
+      ELSEIF (ISIZX .EQ. 3) THEN
+        SIZX = 24./1024.
+      ELSEIF (ISIZX .EQ. 2) THEN
+        SIZX = 16./1024.
+      ELSEIF (ISIZX .EQ. 1) THEN
+        SIZX = 12./1024.
+      ELSE
+        SIZX = 8./1024.
+      ENDIF
+C
+      IF (ISIZY .GT. 3) THEN
+        SIZY = FLOAT(ISIZY)/XRANGE
+      ELSEIF (ISIZY .EQ. 3) THEN
+        SIZY = 24./1024.
+      ELSEIF (ISIZY .EQ. 2) THEN
+        SIZY = 16./1024.
+      ELSEIF (ISIZY .EQ. 1) THEN
+        SIZY = 12./1024.
+      ELSE
+        SIZY = 8./1024.
+      ENDIF
+C
+C  CALCULATE XDEC AND YDEC AS PERCENTAGES OF TOTAL SCREEN WIDTH
+C  IN PLOTTER ADDRESS UNITS.
+C
+      IF (IXDEC .EQ. 0 .OR. IXDEC .EQ. 1) THEN
+        YDEC = FLOAT(IXDEC)
+      ELSE
+        YDEC = FLOAT(IXDEC)/XRANGE
+      ENDIF
+      IF (IYDEC .EQ. 0 .OR. IYDEC .EQ. 1) THEN
+        XDEC = FLOAT(IYDEC)
+      ELSE
+        XDEC = FLOAT(IYDEC)/YRANGE
+      ENDIF
+C
+      IXORI = IXOR
+C
+      RETURN
+      END
+      SUBROUTINE TICK4(LMAJX,LMINX,LMAJY,LMINY)
+C
+C  CHANGES TICK LENGTH FOR EACH AXIS.
+C
+      COMMON /TICK/ MAJX, MINX, MAJY, MINY
+      REAL MAJX, MINX, MAJY, MINY
+C
+C  THE FOLLOWING IS FOR GATHERING STATISTICS ON LIBRARY USE AT NCAR
+C
+      CALL Q8QST4('GRAPHX','GRIDAL','TICK4','VERSION 01')
+C
+      CALL GETUSV('XF', IVAL)
+      XRANGE = 2. ** IVAL
+      CALL GETUSV('YF', IVAL)
+      YRANGE = 2. ** IVAL
+C
+      MAJX = FLOAT(LMAJX)/YRANGE
+      MINX = FLOAT(LMINX)/YRANGE
+      MAJY = FLOAT(LMAJY)/XRANGE
+      MINY = FLOAT(LMINY)/XRANGE
+C
+      RETURN
+      END
+      SUBROUTINE TICKS(LMAJ,LMIN)
+C
+      COMMON /TICK/ MAJX,MINX,MAJY,MINY
+      REAL MAJX,MINX,MAJY,MINY
+C
+C  THE FOLLOWING IS FOR GATHERING STATISTICS ON LIBRARY USE AT NCAR
+C
+      CALL Q8QST4('GRAPHX','GRIDAL','TICKS','VERSION 01')
+C
+      CALL TICK4(LMAJ,LMIN,LMAJ,LMIN)
+C
+      RETURN
+      END
+      SUBROUTINE CHSTR(LABEL,FIRST,LAST)
+C
+C  THIS CALCULATES THE POSITION OF THE FIRST NON-BLANK CHARACTER
+C  AND THE POSITION OF THE LAST NON-BLANK CHARACTER IN LABEL.
+C
+      INTEGER   FIRST, LAST
+      CHARACTER*15 LABEL
+C
+      DO 100 I = 1,15
+      IF (LABEL(I:I) .NE. ' ') GOTO 200
+ 100  CONTINUE
+ 200  FIRST = I
+      LAST = 15
+      IF (FIRST .NE. 15) THEN
+        DO 300 J = FIRST+1,15
+        IF (LABEL(J:J) .EQ. ' ') THEN
+          LAST = J-1
+          GOTO 999
+        ENDIF
+ 300    CONTINUE
+ 999    CONTINUE
+      ENDIF
+      RETURN
+      END
+      SUBROUTINE EXPAND(MAXW)
+C
+C  THE WINDOW IS EXPANDED AND THE NEW WORLD COORDINATES ARE
+C  CALCULATED TO CORRESPOND TO THE MAXIMUM VIEWPORT.
+C  THE ORIGINAL ASPECT RATIO OF WORLD COORDINATES TO VIEWPORT
+C  COORDINATES REMAINS THE SAME.  UNDER THE NEWLY-DEFINED
+C  NORMALIZATION TRANSFORMATION, THE WINDOW OF THE ORIGINAL
+C  NORMALIZATION TRANSFORMATION IS MAPPED TO THE VIEWPORT
+C  OF THE ORIGINAL NORMALIZATION TRANSFORMATION IN EXACTLY
+C  THE SAME WAY AS IN THE INITIAL NORMALIZATION TRANSFORMATION.
+C
+      REAL MAXW(4), VIEW(4), WIND(4)
+      REAL LEFT
+C
+C  INQUIRE CURRENT WINDOW AND VIEWPORT SETTINGS.
+C
+      CALL GQCNTN(IERR,ICNT)
+      CALL GQNT(ICNT,IERR,WIND,VIEW)
+C
+C  CALCULATE RATIO OF Y WORLD/VIEWPORT COORDINATES.
+C
+      YRATIO = (WIND(4) - WIND(3))/(VIEW(4) - VIEW(3))
+C
+C  CALCULATE RATIO OF X WORLD/VIEWPORT COORDINATES.
+C
+      XRATIO = (WIND(2) - WIND(1))/(VIEW(2) - VIEW(1))
+C
+C  GET EXPANDED LOWER LIMIT Y COORDINATE.
+C
+      VBOTTM = VIEW(3) - 0.
+      BOTTOM = YRATIO * VBOTTM
+      MAXW(3) = WIND(3) - BOTTOM
+C
+C  GET EXPANDED UPPER LIMIT Y COORDINATE.
+C
+      VTOP = 1. - VIEW(4)
+      TOP = YRATIO * VTOP
+      MAXW(4) = WIND(4) + TOP
+C
+C  GET EXPANDED LEFT LIMIT X COORDINATE.
+C
+      VLEFT = VIEW(1) - 0.
+      LEFT = XRATIO * VLEFT
+      MAXW(1) = WIND(1) - LEFT
+C
+C  GET EXPANDED RIGHT LIMIT X COORDINATE.
+C
+      VRIGHT = 1. - VIEW(2)
+      RIGHT = XRATIO * VRIGHT
+      MAXW(2) = WIND(2) + RIGHT
+C
+C  SET NEW (EXPANDED) NORMALIZATION TRANSFORMATION.
+C
+      CALL GSWN(1,MAXW(1),MAXW(2),MAXW(3),MAXW(4))
+      CALL GSVP(1, 0., 1., 0., 1. )
+      CALL GSELNT(1)
+C
+      RETURN
+      END