Repatch (from linux) of OSX IRAF

1 files changed, 219 insertions, 0 deletions

diff --git a/unix/f2c/libf2c/makefile.u b/unix/f2c/libf2c/makefile.u
new file mode 100644
index 00000000..6d05dc6e
--- /dev/null
+++ b/unix/f2c/libf2c/makefile.u
@@ -0,0 +1,219 @@
+# Unix makefile: see README.
+# For C++, first "make hadd".
+# If your compiler does not recognize ANSI C, add
+#	-DKR_headers
+# to the CFLAGS = line below.
+# On Sun and other BSD systems that do not provide an ANSI sprintf, add
+#	-DUSE_STRLEN
+# to the CFLAGS = line below.
+# On Linux systems, add
+#	-DNON_UNIX_STDIO
+# to the CFLAGS = line below.  For libf2c.so under Linux, also add
+#	-fPIC
+# to the CFLAGS = line below.
+
+.SUFFIXES: .c .o
+CC = cc
+SHELL = /bin/sh
+CFLAGS = -O -w $(HSI_CF)
+
+# compile, then strip unnecessary symbols
+.c.o:
+	$(CC) -c -DSkip_f2c_Undefs $(CFLAGS) $*.c
+	ld -r -x -o $*.xxx $*.o
+	mv $*.xxx $*.o
+## Under Solaris (and other systems that do not understand ld -x),
+## omit -x in the ld line above.
+## If your system does not have the ld command, comment out
+## or remove both the ld and mv lines above.
+
+MISC =	f77vers.o i77vers.o main.o s_rnge.o abort_.o exit_.o getarg_.o iargc_.o\
+	getenv_.o signal_.o s_stop.o s_paus.o system_.o cabs.o ctype.o\
+	derf_.o derfc_.o erf_.o erfc_.o sig_die.o uninit.o
+POW =	pow_ci.o pow_dd.o pow_di.o pow_hh.o pow_ii.o pow_ri.o pow_zi.o pow_zz.o
+CX =	c_abs.o c_cos.o c_div.o c_exp.o c_log.o c_sin.o c_sqrt.o
+DCX =	z_abs.o z_cos.o z_div.o z_exp.o z_log.o z_sin.o z_sqrt.o
+REAL =	r_abs.o r_acos.o r_asin.o r_atan.o r_atn2.o r_cnjg.o r_cos.o\
+	r_cosh.o r_dim.o r_exp.o r_imag.o r_int.o\
+	r_lg10.o r_log.o r_mod.o r_nint.o r_sign.o\
+	r_sin.o r_sinh.o r_sqrt.o r_tan.o r_tanh.o
+DBL =	d_abs.o d_acos.o d_asin.o d_atan.o d_atn2.o\
+	d_cnjg.o d_cos.o d_cosh.o d_dim.o d_exp.o\
+	d_imag.o d_int.o d_lg10.o d_log.o d_mod.o\
+	d_nint.o d_prod.o d_sign.o d_sin.o d_sinh.o\
+	d_sqrt.o d_tan.o d_tanh.o
+INT =	i_abs.o i_dim.o i_dnnt.o i_indx.o i_len.o i_mod.o i_nint.o i_sign.o\
+	lbitbits.o lbitshft.o
+HALF =	h_abs.o h_dim.o h_dnnt.o h_indx.o h_len.o h_mod.o h_nint.o h_sign.o
+CMP =	l_ge.o l_gt.o l_le.o l_lt.o hl_ge.o hl_gt.o hl_le.o hl_lt.o
+EFL =	ef1asc_.o ef1cmc_.o
+CHAR =	f77_aloc.o s_cat.o s_cmp.o s_copy.o
+I77 =	backspac.o close.o dfe.o dolio.o due.o endfile.o err.o\
+	fmt.o fmtlib.o ftell_.o iio.o ilnw.o inquire.o lread.o lwrite.o\
+	open.o rdfmt.o rewind.o rsfe.o rsli.o rsne.o sfe.o sue.o\
+	typesize.o uio.o util.o wref.o wrtfmt.o wsfe.o wsle.o wsne.o xwsne.o
+QINT =	pow_qq.o qbitbits.o qbitshft.o ftell64_.o
+TIME =	dtime_.o etime_.o
+
+# If you get an error compiling dtime_.c or etime_.c, try adding
+# -DUSE_CLOCK to the CFLAGS assignment above; if that does not work,
+# omit $(TIME) from OFILES = assignment below.
+
+# To get signed zeros in write statements on IEEE-arithmetic systems,
+# add -DSIGNED_ZEROS to the CFLAGS assignment below and add signbit.o
+# to the end of the OFILES = assignment below.
+
+# For INTEGER*8 support (which requires system-dependent adjustments to
+# f2c.h), add $(QINT) to the OFILES = assignment below...
+
+OFILES = $(MISC) $(POW) $(CX) $(DCX) $(REAL) $(DBL) $(INT) \
+	$(HALF) $(CMP) $(EFL) $(CHAR) $(I77) $(TIME)
+
+all: f2c.h signal1.h sysdep1.h libf2c.a
+
+libf2c.a: $(OFILES)
+	ar r libf2c.a $?
+	-ranlib libf2c.a
+
+## Shared-library variant: the following rule works on Linux
+## systems.  Details are system-dependent.  Under Linux, -fPIC
+## must appear in the CFLAGS assignment when making libf2c.so.
+## Under Solaris, use -Kpic in CFLAGS and use "ld -G" instead
+## of "$(CC) -shared".
+## For MacOSX 10.4 and 10.5 (and perhaps other versions >= 10.3), use
+## "MACOSX_DEPLOYMENT_TARGET=10.3 libtool -dynamic -undefined dynamic_lookup -single_module"
+## instead of "$(CC) -shared", and when running programs linked against libf2c.so,
+## arrange for $DYLD_LIBRARY_PATH to include the directory containing libf2c.so.
+
+libf2c.so: $(OFILES)
+	$(CC) -shared -o libf2c.so $(OFILES)
+
+### If your system lacks ranlib, you don't need it; see README.
+
+f77vers.o: f77vers.c
+	$(CC) -c f77vers.c
+
+i77vers.o: i77vers.c
+	$(CC) -c i77vers.c
+
+# To get an "f2c.h" for use with "f2c -C++", first "make hadd"
+hadd: f2c.h0 f2ch.add
+	cat f2c.h0 f2ch.add >f2c.h
+
+# For use with "f2c" and "f2c -A":
+f2c.h: f2c.h0
+	cp f2c.h0 f2c.h
+
+# You may need to adjust signal1.h and sysdep1.h suitably for your system...
+signal1.h: signal1.h0
+	cp signal1.h0 signal1.h
+
+sysdep1.h: sysdep1.h0
+	cp sysdep1.h0 sysdep1.h
+
+# If your system lacks onexit() and you are not using an
+# ANSI C compiler, then you should uncomment the following
+# two lines (for compiling main.o):
+#main.o: main.c
+#	$(CC) -c -DNO_ONEXIT -DSkip_f2c_Undefs main.c
+# On at least some Sun systems, it is more appropriate to
+# uncomment the following two lines:
+#main.o: main.c
+#	$(CC) -c -Donexit=on_exit -DSkip_f2c_Undefs main.c
+
+install: libf2c.a
+	cp libf2c.a $(LIBDIR)
+	-ranlib $(LIBDIR)/libf2c.a
+
+clean:
+	rm -f libf2c.a *.o arith.h signal1.h sysdep1.h
+
+backspac.o:	fio.h
+close.o:	fio.h
+dfe.o:		fio.h
+dfe.o:		fmt.h
+due.o:		fio.h
+endfile.o:	fio.h rawio.h
+err.o:		fio.h rawio.h
+fmt.o:		fio.h
+fmt.o:		fmt.h
+iio.o:		fio.h
+iio.o:		fmt.h
+ilnw.o:		fio.h
+ilnw.o:		lio.h
+inquire.o:	fio.h
+lread.o:	fio.h
+lread.o:	fmt.h
+lread.o:	lio.h
+lread.o:	fp.h
+lwrite.o:	fio.h
+lwrite.o:	fmt.h
+lwrite.o:	lio.h
+open.o:		fio.h rawio.h
+rdfmt.o:	fio.h
+rdfmt.o:	fmt.h
+rdfmt.o:	fp.h
+rewind.o:	fio.h
+rsfe.o:		fio.h
+rsfe.o:		fmt.h
+rsli.o:		fio.h
+rsli.o:		lio.h
+rsne.o:		fio.h
+rsne.o:		lio.h
+sfe.o:		fio.h
+signbit.o:	arith.h
+sue.o:		fio.h
+uio.o:		fio.h
+uninit.o:	arith.h
+util.o:		fio.h
+wref.o:		fio.h
+wref.o:		fmt.h
+wref.o:		fp.h
+wrtfmt.o:	fio.h
+wrtfmt.o:	fmt.h
+wsfe.o:		fio.h
+wsfe.o:		fmt.h
+wsle.o:		fio.h
+wsle.o:		fmt.h
+wsle.o:		lio.h
+wsne.o:		fio.h
+wsne.o:		lio.h
+xwsne.o:	fio.h
+xwsne.o:	lio.h
+xwsne.o:	fmt.h
+
+arith.h: arithchk.c
+	$(CC) $(CFLAGS) -DNO_FPINIT arithchk.c -lm ||\
+	 $(CC) -DNO_LONG_LONG $(CFLAGS) -DNO_FPINIT arithchk.c -lm
+	./a.out >arith.h
+	rm -f a.out arithchk.o
+
+check:
+	xsum Notice README abort_.c arithchk.c backspac.c c_abs.c c_cos.c \
+	c_div.c c_exp.c c_log.c c_sin.c c_sqrt.c cabs.c close.c comptry.bat \
+	ctype.c ctype.h \
+	d_abs.c d_acos.c d_asin.c d_atan.c d_atn2.c d_cnjg.c d_cos.c d_cosh.c \
+	d_dim.c d_exp.c d_imag.c d_int.c d_lg10.c d_log.c d_mod.c \
+	d_nint.c d_prod.c d_sign.c d_sin.c d_sinh.c d_sqrt.c d_tan.c \
+	d_tanh.c derf_.c derfc_.c dfe.c dolio.c dtime_.c due.c ef1asc_.c \
+	ef1cmc_.c endfile.c erf_.c erfc_.c err.c etime_.c exit_.c f2c.h0 \
+	f2ch.add f77_aloc.c f77vers.c fio.h fmt.c fmt.h fmtlib.c \
+	fp.h ftell_.c ftell64_.c \
+	getarg_.c getenv_.c h_abs.c h_dim.c h_dnnt.c h_indx.c h_len.c \
+	h_mod.c h_nint.c h_sign.c hl_ge.c hl_gt.c hl_le.c hl_lt.c \
+	i77vers.c i_abs.c i_dim.c i_dnnt.c i_indx.c i_len.c i_mod.c \
+	i_nint.c i_sign.c iargc_.c iio.c ilnw.c inquire.c l_ge.c l_gt.c \
+	l_le.c l_lt.c lbitbits.c lbitshft.c libf2c.lbc libf2c.sy lio.h \
+	lread.c lwrite.c main.c makefile.sy makefile.u makefile.vc \
+	makefile.wat math.hvc mkfile.plan9 open.c pow_ci.c pow_dd.c \
+	pow_di.c pow_hh.c pow_ii.c pow_qq.c pow_ri.c pow_zi.c pow_zz.c \
+	qbitbits.c qbitshft.c r_abs.c r_acos.c r_asin.c r_atan.c r_atn2.c \
+	r_cnjg.c r_cos.c r_cosh.c r_dim.c r_exp.c r_imag.c r_int.c r_lg10.c \
+	r_log.c r_mod.c r_nint.c r_sign.c r_sin.c r_sinh.c r_sqrt.c \
+	r_tan.c r_tanh.c rawio.h rdfmt.c rewind.c rsfe.c rsli.c rsne.c \
+	s_cat.c s_cmp.c s_copy.c s_paus.c s_rnge.c s_stop.c scomptry.bat sfe.c \
+	sig_die.c signal1.h0 signal_.c signbit.c sue.c sysdep1.h0 system_.c \
+	typesize.c \
+	uio.c uninit.c util.c wref.c wrtfmt.c wsfe.c wsle.c wsne.c xwsne.c \
+	z_abs.c z_cos.c z_div.c z_exp.c z_log.c z_sin.c z_sqrt.c >xsum1.out
+	cmp xsum0.out xsum1.out && mv xsum1.out xsum.out || diff xsum[01].out