diff options
Diffstat (limited to 'sys/gio/ncarutil/autograph/agdflt.bd')
| -rw-r--r-- | sys/gio/ncarutil/autograph/agdflt.bd | 414 |
1 files changed, 414 insertions, 0 deletions
diff --git a/sys/gio/ncarutil/autograph/agdflt.bd b/sys/gio/ncarutil/autograph/agdflt.bd new file mode 100644 index 00000000..ddbde9a1 --- /dev/null +++ b/sys/gio/ncarutil/autograph/agdflt.bd @@ -0,0 +1,414 @@ +C +NOAO +C This block data has been rewritten as a run time initialization +C subroutine (see file agdflt.f). This original block data file +C is retained for reference only. +C -NOAO +C +C --------------------------------------------------------------------- +C + BLOCK DATA AGDFLT +C +C The block data subroutine AGDFLT defines the default values of those +C AUTOGRAPH parameters which can be declared in a DATA statement. See +C AGINIT for code initializing other AUTOGRAPH parameters. +C +C Following are declarations of all the AUTOGRAPH common blocks. +C +C The following common block contains the AUTOGRAPH control parameters, +C all of which are real. If it is changed, all of AUTOGRAPH (especially +C the routine AGSCAN) must be examined for possible side effects. +C + COMMON /AGCONP/ QFRA,QSET,QROW,QIXY,QWND,QBAC , SVAL(2) , + + XLGF,XRGF,YBGF,YTGF , XLGD,XRGD,YBGD,YTGD , SOGD , + + XMIN,XMAX,QLUX,QOVX,QCEX,XLOW,XHGH , + + YMIN,YMAX,QLUY,QOVY,QCEY,YLOW,YHGH , + + QDAX(4),QSPA(4),PING(4),PINU(4),FUNS(4),QBTD(4), + + BASD(4),QMJD(4),QJDP(4),WMJL(4),WMJR(4),QMND(4), + + QNDP(4),WMNL(4),WMNR(4),QLTD(4),QLED(4),QLFD(4), + + QLOF(4),QLOS(4),DNLA(4),WCLM(4),WCLE(4) , + + QODP,QCDP,WOCD,WODQ,QDSH(26) , + + QDLB,QBIM,FLLB(10,8),QBAN , + + QLLN,TCLN,QNIM,FLLN(6,16),QNAN , + + XLGW,XRGW,YBGW,YTGW , XLUW,XRUW,YBUW,YTUW , + + XLCW,XRCW,YBCW,YTCW , WCWP,HCWP,SCWP , + + XBGA(4),YBGA(4),UBGA(4),XNDA(4),YNDA(4),UNDA(4), + + QBTP(4),BASE(4),QMNT(4),QLTP(4),QLEX(4),QLFL(4), + + QCIM(4),QCIE(4),RFNL(4),WNLL(4),WNLR(4),WNLB(4), + + WNLE(4),QLUA(4) , + + RBOX(6),DBOX(6,4),SBOX(6,4) +C +C The following common block contains other AUTOGRAPH variables, both +C real and integer, which are not control parameters. +C + COMMON /AGORIP/ SMRL , ISLD , MWCL,MWCM,MWCE,MDLA,MWCD,MWDQ , + + INIF +C +C The following common block contains other AUTOGRAPH variables, of +C type character. +C + COMMON /AGOCHP/ CHS1,CHS2 +C + CHARACTER*504 CHS1,CHS2 +C +C The following common blocks contain variables which are required for +C the character-storage-and-retrieval scheme of AUTOGRAPH. +C + COMMON /AGCHR1/ LNIC,INCH(2,50),LNCA,INCA +C + COMMON /AGCHR2/ CHRA(2000) +C + CHARACTER*1 CHRA +C +C --------------------------------------------------------------------- +C +C Following are declarations of default values of variables in the +C AUTOGRAPH common blocks. +C +C --------------------------------------------------------------------- +C +C QFRA defines the control parameter 'FRAME.', which specifies when, if +C ever, the EZ... routines are to call FRAME to advance to a new frame. +C + DATA QFRA / 1. / +C +C QSET defines the control parameter 'SET.', which determines how the +C last call to the plot-package routine "SET" is to affect AUTOGRAPH. +C + DATA QSET / 1. / +C +C QROW defines the control parameter 'ROW.', which determines how the x +C and y input arrays (in calls to AGSTUP and AGCURV) are to be used. +C + DATA QROW / 1. / +C +C QIXY defines the control parameter 'INVERT.', which, if set non-zero, +C causes the routines AGSTUP and AGCURV to behave as if the arguments +C defining the x and y data had been interchanged. +C + DATA QIXY / 0. / +C +C QWND defines the control parameter 'WINDOW.', which, if set non-zero, +C causes curves drawn to be scissored by the edge of the curve window. +C + DATA QWND / 0. / +C +C QBAC defines the control parameter 'BACKGROUND.', which can be given +C any of four values to set up four specific types of plot background. +C + DATA QBAC / 1. / +C +C SVAL defines the control parameters 'NULL/1.' and 'NULL/2.', which are +C used in various ways by AUTOGRAPH. +C + DATA SVAL(1) / 1E36 / , SVAL(2) / 2E36 / +C +C XLGF, XRGF, YBGF, and YTGF define the parameter-group 'GRAPH.'; they +C specify the position of the graph window within the plotter frame. +C + DATA XLGF / 0. / , XRGF / 1. / , YBGF / 0. / , YTGF / 1. / +C +C XLGD, XRGD, YBGD, and YTGD define the first four parameters in the +C group 'GRID.'; they specify the position of the grid window within +C the graph window. +C + DATA XLGD / .15 / , XRGD / .95 / , YBGD / .15 / , YTGD / .95 / +C +C SOGD defines the control parameter 'GRID/SHAPE.', which defines the +C shape of the grid window. +C + DATA SOGD / 0. / +C +C XMIN and XMAX define the control parameters 'X/MIN.' and 'X/MAX.', +C which determine how minimum and maximum values of x are to be chosen. +C Null values imply that AUTOGRAPH is to choose real values; non-null +C values are the actual values to be used (perhaps after rounding). +C + DATA XMIN / 1E36 / , XMAX / 1E36 / +C +C QLUX defines the control parameter 'X/LOG.', which is set non-zero to +C specify that the horizontal axis is to be logarithmic. +C + DATA QLUX / 0. / +C +C QOVX defines the control parameter 'X/ORDER.', which is set non-zero +C to flip the horizontal axis end-for-end. +C + DATA QOVX / 0. / +C +C QCEX defines the control parameter 'X/NICE.', which determines which, +C if either, of the horizontal axes is to have "nice" (rounded) values +C at its ends. +C + DATA QCEX / -1. / +C +C XLOW and XHGH define the control parameters 'X/SMALLEST.' and +C 'X/LARGEST.'; they come into play only when XMIN and/or XMAX are null +C and they are non-null, in which case they set limits on the range of +C x data to be considered when choosing the minimum and/or maximum. +C + DATA XLOW / 1E36 / , XHGH / 1E36 / +C +C YMIN and YMAX define the control parameters 'Y/MIN.' and 'Y/MAX.', +C which determine how minimum and maximum values of y are to be chosen. +C Null values imply that AUTOGRAPH is to choose real values; non-null +C values are the actual values to be used (perhaps after rounding). +C + DATA YMIN / 1E36 / , YMAX / 1E36 / +C +C QLUY defines the control parameter 'Y/LOG.', which is set non-zero to +C specify that the horizontal axis is to be logarithmic. +C + DATA QLUY / 0. / +C +C QOVY defines the control parameter 'Y/ORDER.', which is set non-zero +C to flip the horizontal axis end-for-end. +C + DATA QOVY / 0. / +C +C QCEY defines the control parameter 'Y/NICE.', which determines which, +C if either, of the horizontal axes is to have "nice" (rounded) values +C at its ends. +C + DATA QCEY / -1. / +C +C YLOW and YHGH define the control parameters 'Y/SMALLEST.' and +C 'Y/LARGEST.'; they come into play only when YMIN and/or YMAX are null +C and they are non-null, in which case they set limits on the range of +C y data to be considered when choosing the minimum and/or maximum. +C + DATA YLOW / 1E36 / , YHGH / 1E36 / +C +C QDAX(i) defines the control parameters 'AXIS/s/CONTROL.' (i=1 implies +C s='LEFT', i=2 implies s='RIGHT', i=3 implies s='BOTTOM', i=4 implies +C s='TOP'). Each of these specifies whether or not a given axis will +C be drawn or not and what liberties may be taken with numeric labels +C on the axis. +C + DATA QDAX(1)/ 4. / , QDAX(2)/ 4. / , QDAX(3)/ 4. / , QDAX(4)/ 4. / +C +C Each QSPA(i) defines a control parameter 'AXIS/s/LINE.', which says +C whether or not the line portion of a particular axis is to be drawn. +C + DATA QSPA(1)/ 0. / , QSPA(2)/ 0. / , QSPA(3)/ 0. / , QSPA(4)/ 0. / +C +C Each PING(i) defines a control parameter 'AXIS/s/INTERSECTION/GRID.', +C which may be used to move a particular axis to a specified position. +C + DATA PING(1)/1E36/ , PING(2)/1E36/ , PING(3)/1E36/ , PING(4)/1E36/ +C +C Each PINU(i) defines a control parameter 'AXIS/s/INTERSECTION/USER.', +C which may be used to move a particular axis to a specified position. +C + DATA PINU(1)/1E36/ , PINU(2)/1E36/ , PINU(3)/1E36/ , PINU(4)/1E36/ +C +C Each FUNS(i) defines a control parameter 'AXIS/s/FUNCTION.', which is +C used within a user-supplied version of AGUTOL to select a particular +C uset-system-to-label-system mapping for a particular axis. The +C default value selects the identity mapping. +C + DATA FUNS(1)/ 0. / , FUNS(2)/ 0. / , FUNS(3)/ 0. / , FUNS(4)/ 0. / +C +C The values of QBTD(i), BASD(i), QMJD(i), QJDP(i), WMJL(i), and WMJR(i) +C together define the control-parameter group 'AXIS/s/TICKS/MAJOR.', +C which determines the positioning and appearance of the major ticks on +C a particular axis. +C + DATA QBTD(1)/1E36/ , QBTD(2)/1E36/ , QBTD(3)/1E36/ , QBTD(4)/1E36/ + DATA BASD(1)/1E36/ , BASD(2)/1E36/ , BASD(3)/1E36/ , BASD(4)/1E36/ + DATA QMJD(1)/ 6. / , QMJD(2)/ 6. / , QMJD(3)/ 6. / , QMJD(4)/ 6. / + DATA QJDP(1)/1E36/ , QJDP(2)/1E36/ , QJDP(3)/1E36/ , QJDP(4)/1E36/ + DATA WMJL(1)/ 0. / , WMJL(2)/ 0. / , WMJL(3)/ 0. / , WMJL(4)/ 0. / + DATA WMJR(1)/.015/ , WMJR(2)/.015/ , WMJR(3)/.015/ , WMJR(4)/.015/ +C +C The values of QMND(i), QNDP(i), WMNL(i), and WMNR(i) together define +C the control-parameter group 'AXIS/s/TICKS/MINOR.', which determines +C the positioning and appearance of the major ticks on a particular +C axis. +C + DATA QMND(1)/1E36/ , QMND(2)/1E36/ , QMND(3)/1E36/ , QMND(4)/1E36/ + DATA QNDP(1)/1E36/ , QNDP(2)/1E36/ , QNDP(3)/1E36/ , QNDP(4)/1E36/ + DATA WMNL(1)/ 0. / , WMNL(2)/ 0. / , WMNL(3)/ 0. / , WMNL(4)/ 0. / + DATA WMNR(1)/.010/ , WMNR(2)/.010/ , WMNR(3)/.010/ , WMNR(4)/.010/ +C +C The values of QLTD(i), QLED(i), QLFD(i), QLOF(i), QLOS(i), DNLA(i), +C WCLM(i), and WCLE(i) together define the control-parameter group +C 'AXIS/s/NUMERIC.', which determines the positioning and appearance of +C the numeric labels on a particular axis. +C + DATA QLTD(1)/1E36/ , QLTD(2)/ 0./ , QLTD(3)/1E36/ , QLTD(4)/ 0./ + DATA QLED(1)/1E36/ , QLED(2)/1E36/ , QLED(3)/1E36/ , QLED(4)/1E36/ + DATA QLFD(1)/1E36/ , QLFD(2)/1E36/ , QLFD(3)/1E36/ , QLFD(4)/1E36/ + DATA QLOF(1)/ 0. / , QLOF(2)/ 0. / , QLOF(3)/ 0. / , QLOF(4)/ 0. / + DATA QLOS(1)/ 90./ , QLOS(2)/ 90./ , QLOS(3)/ 90./ , QLOS(4)/ 90./ + DATA DNLA(1)/.015/ , DNLA(2)/.015/ , DNLA(3)/.015/ , DNLA(4)/.015/ + DATA WCLM(1)/.015/ , WCLM(2)/.015/ , WCLM(3)/.015/ , WCLM(4)/.015/ + DATA WCLE(1)/.010/ , WCLE(2)/.010/ , WCLE(3)/.010/ , WCLE(4)/.010/ +C +C QODP defines the control parameter 'DASH/SELECTOR.', the sign of which +C determines which set of dash patterns is used by EZMY and EZMXY (the +C alphabetic set or the user-specified set); if the user-specified set +C is selected, the magnitude of QODP determines how many of them are to +C be used. +C + DATA QODP / 1. / +C +C QCDP defines the control parameter 'DASH/LENGTH.', which specifies the +C assumed length of dash patterns tendered to AUTOGRAPH. +C + DATA QCDP / 8. / +C +C WOCD and WODQ define the control parameters 'DASH/CHARACTER.' and +C 'DASH/DOLLAR-QUOTE.', which specify the widths of characters used in +C character-string dash patterns. +C + DATA WOCD / .010 / , WODQ / .010 / +C +C QDSH defines the control-parameter group 'DASH/PATTERN.'. Each value, +C if positive, defines a binary dash pattern, and, if negative, serves +C as an identifier in retrieving a character-string dash pattern. +C + DATA QDSH / 26*65535. / +C +C QDLB defines the control parameter 'LABEL/CONTROL.', which specifies +C what may be done with informational labels in response to overlap +C problems. +C + DATA QDLB /2./ +C +C QBIM defines the control parameter 'LABEL/BUFFER/LENGTH.' and must +C be equal to the second dimension of the array FLLB. +C + DATA QBIM / 8. / +C +C QBAN defines the control parameter 'LABEL/NAME.'; its value is really +C a pointer into the label list. The default value, zero, means that +C the pointer has not been set. +C + DATA QBAN / 0. / +C +C QLLN defines the control parameter 'LINE/MAXIMUM.' - the assumed +C maximum length of character strings intended for use as the text of a +C line of a label. +C + DATA QLLN /40./ +C +C TCLN defines the control parameter 'LINE/TERMINATOR.' - which is used +C to mark the end of character strings intended for use as the text of a +C line of a label. It is initialized in AGINIT. +C +C QNIM defines the control parameter 'LINE/BUFFER/LENGTH.' and must be +C equal to the second dimension of FLLN. +C + DATA QNIM / 16. / +C +C QNAN defines the control parameter 'LINE/NUMBER.'; its value is really +C a pointer into the line list. The default value, zero, says that the +C pointer has not been set. +C + DATA QNAN / 0. / +C +C (FLLB(I,1),I=1,10) and (FLLN(I,1),I=1,6) define the label to the left +C of the grid. The name, in FLLB(1,1), and the line text, in FLLN(4,1), +C must be filled in by AGINIT. +C + DATA FLLB( 1,1)/ 0./ , FLLB( 2,1)/ 0./ , FLLB( 3,1)/ 0./ , + + FLLB( 4,1)/ .5/ , FLLB( 5,1)/-.015/ , FLLB( 6,1)/ 0./ , + + FLLB( 7,1)/ 90./ , FLLB( 8,1)/ 0./ , FLLB( 9,1)/ 1./ , + + FLLB(10,1)/ 1./ , FLLN( 1,1)/+100./ , FLLN( 2,1)/ 0./ , + + FLLN( 3,1)/ .015/ , FLLN( 4,1)/ -2./ , FLLN( 5,1)/ 1./ , + + FLLN( 6,1)/ 0./ +C +C (FLLB(I,2),I=1,10) and (FLLN(I,2),I=1,6) define the label to the right +C of the grid. The name, in FLLB(1,2), and the line text, in FLLN(4,2), +C must be filled in by AGINIT. +C + DATA FLLB( 1,2)/ 0./ , FLLB( 2,2)/ 0./ , FLLB( 3,2)/ 1./ , + + FLLB( 4,2)/ .5/ , FLLB( 5,2)/+.015/ , FLLB( 6,2)/ 0./ , + + FLLB( 7,2)/ 90./ , FLLB( 8,2)/ 0./ , FLLB( 9,2)/ 1./ , + + FLLB(10,2)/ 2./ , FLLN( 1,2)/-100./ , FLLN( 2,2)/ 0./ , + + FLLN( 3,2)/ .015/ , FLLN( 4,2)/ -3./ , FLLN( 5,2)/ 0./ , + + FLLN( 6,2)/ 0./ +C +C (FLLB(I,3),I=1,10) and (FLLN(I,3),I=1,6) define the label below the +C grid. The name, in FLLB(1,3), and the line text, in FLLN(4,3), must +C be filled in by AGINIT. +C + DATA FLLB( 1,3)/ 0./ , FLLB( 2,3)/ 0./ , FLLB( 3,3)/ .5/ , + + FLLB( 4,3)/ 0./ , FLLB( 5,3)/ 0./ , FLLB( 6,3)/-.015/ , + + FLLB( 7,3)/ 0./ , FLLB( 8,3)/ 0./ , FLLB( 9,3)/ 1./ , + + FLLB(10,3)/ 3./ , FLLN( 1,3)/-100./ , FLLN( 2,3)/ 0./ , + + FLLN( 3,3)/ .015/ , FLLN( 4,3)/ -1./ , FLLN( 5,3)/ 1./ , + + FLLN( 6,3)/ 0./ +C +C (FLLB(I,4),I=1,10) and (FLLN(I,4),I=1,6) define the label above the +C grid. The name, in FLLB(1,4), and the line text, in FLLN(4,4), must +C be filled in by AGINIT. +C + DATA FLLB( 1,4)/ 0./ , FLLB( 2,4)/ 0./ , FLLB( 3,4)/ .5/ , + + FLLB( 4,4)/ 1./ , FLLB( 5,4)/ 0./ , FLLB( 6,4)/+.020/ , + + FLLB( 7,4)/ 0./ , FLLB( 8,4)/ 0./ , FLLB( 9,4)/ 1./ , + + FLLB(10,4)/ 4./ , FLLN( 1,4)/+100./ , FLLN( 2,4)/ 0./ , + + FLLN( 3,4)/ .020/ , FLLN( 4,4)/ -3./ , FLLN( 5,4)/ 0./ , + + FLLN( 6,4)/ 0./ +C +C Certain secondary parameters must be initialized to prevent bombing. +C + DATA QBTP(1)/ 0./ , QBTP(2)/ 0./ , QBTP(3)/ 0./ , QBTP(4)/ 0./ + DATA BASE(1)/ 0./ , BASE(2)/ 0./ , BASE(3)/ 0./ , BASE(4)/ 0./ + DATA QMNT(1)/ 0./ , QMNT(2)/ 0./ , QMNT(3)/ 0./ , QMNT(4)/ 0./ + DATA QLTP(1)/ 0./ , QLTP(2)/ 0./ , QLTP(3)/ 0./ , QLTP(4)/ 0./ + DATA QLEX(1)/ 0./ , QLEX(2)/ 0./ , QLEX(3)/ 0./ , QLEX(4)/ 0./ + DATA QLFL(1)/ 0./ , QLFL(2)/ 0./ , QLFL(3)/ 0./ , QLFL(4)/ 0./ + DATA QCIM(1)/ 0./ , QCIM(2)/ 0./ , QCIM(3)/ 0./ , QCIM(4)/ 0./ + DATA QCIE(1)/ 0./ , QCIE(2)/ 0./ , QCIE(3)/ 0./ , QCIE(4)/ 0./ + DATA RFNL(1)/ 0./ , RFNL(2)/ 0./ , RFNL(3)/ 0./ , RFNL(4)/ 0./ + DATA QLUA(1)/ 0./ , QLUA(2)/ 0./ , QLUA(3)/ 0./ , QLUA(4)/ 0./ +C +C SMRL and ISLD are set by the routine AGINIT (which see, below). +C +C MWCL, MWCM, MWCE, MDLA, MWCD, and MWDQ are the minimum widths of label +C characters, mantissa characters, exponent characters, label-to-axis +C distances, dash-pattern characters, and dash-pattern spaces, respect- +C ively (in the plotter coordinate system). +C + DATA MWCL /8/, MWCM /8/, MWCE /8/, MDLA /8/, MWCD /8/, MWDQ /8/ +C +C INIF is an initialization flag, set non-zero to indicate that the +C routine AGINIT has been executed to set the values of AUTOGRAPH +C parameters which, for one reason or another, cannot be preset by +C this block data routine. +C + DATA INIF / 0 / +C +C CHS1 and CHS2 are used within AUTOGRAPH when manipulating character +C strings retrieved by calls to AGGTCH. They need not be preset. +C +C LNIC is the second dimension of the array (INCH) which holds an index +C of the character strings stored by AGSTCH. +C + DATA LNIC / 50 / +C +C INCH is an index of character strings currently stored in CHRA. Each +C entry has the following format: +C +C INCH(1,I), if non-zero, is the index, in the array CHRA, of the +C first character of the Ith character string. +C +C INCH(2,I) is the length of the Ith character string. +C + DATA (INCH(1,I),I=1,50) / 50*0 / + DATA (INCH(2,I),I=1,50) / 50*0 / +C +C LNCA is the size of the array (CHRA) in which AGSTCH stores character +C strings. +C + DATA LNCA / 2000 / +C +C INCA is the index of the last character used in CHRA. +C + DATA INCA / 0 / +C +C CHRA holds character strings stored by AGSTCH. It need not be pre-set +C to anything. +C + END |